Cameo D FORCE 5000 RGB 5,000 mW total output power User-adjustable beam alignment Dust-proof aluminium housing for minimum maintenance High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA Analogue modulation for up to 16 million colour shades Precision beam with minimum divergence for razor-sharp projections Interlock emergency stop signal output ILDA interface for software control […]
Analogue modulation for up to 16 million colour shades
Precision beam with minimum divergence for razor-sharp projections
Interlock emergency stop signal output
ILDA interface for software control
Scan Fail Safety system
Neutrik PowerCON input and output
Temperature-controlled low-noise fan for cool and quiet operation
Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB’s pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Product type
Laser
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Colour spectrum
RGB
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30kpps @ 8° ILDA
Max. scan angle
max. 50 °
Operating modes
ILDA
Operating voltage
100 V AC – 250 V AC
Power consumption
150 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
254 mm
Height
175 mm
Depth
300 mm
Weight
7,9 kg
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “Cameo D FORCE 5000 RGB Laser 5Watt” Cancel reply
Analogue modulation for up to 16 million colour shades
Precision beam with minimum divergence for razor-sharp projections
Interlock emergency stop signal output
ILDA interface for software control
Scan Fail Safety system
Neutrik PowerCON input and output
Temperature-controlled low-noise fan for cool and quiet operation
Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Product type
Laser
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Colour spectrum
RGB
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30kpps @ 8° ILDA
Max. scan angle
max. 50 °
Operating modes
ILDA
Operating voltage
100 V AC - 250 V AC
Power consumption
150 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
254 mm
Height
175 mm
Depth
300 mm
Weight
7,9 kg
Description
The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
The color of the beams changes all the time using laser blanking technology.
Several working modes:
DMX-control: 1channel for easy operation or 10 channels for full control
Standalone: sound activated (internal mic) or automatic
Master/slave: wonderful synchronized shows
Optional CA-8 remote controller available
Compatible with RF-DMX Converter:
* Set the Radiant laser to 1CH DMX-mode
* Set the RF-DMX Converter to MODE1
Built-in microphone
3-digit LED display for easy menu navigation
Optional CA-8 controller for additional functions available
Key actuated on/off switch and emergency switch (interlock) input for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Cameo STORM 3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser
3-in-1 LED Effect
5 x 3 W RGBWA Derby Effect
150 mW Grating Laser (red 100 mW, green 50 mW)
8 x 1 W Strobe LED´s
10 DMX channels, sound and automatic control
Master and slave operation
Low power consumption
Sturdy metal housing
Universal mounting bracket included
The STORM from Cameo Light combines a Derby effect, laser and strobe in one projector. It can be controlled via 10 DMX channels, automatically or by music and used as master or slave. Razor-sharp laser beams in red and green, up to 30 ultra bright strobe lights per second and the RGBWA Derby effect combine to ensure an animated lighting design aimed to impress.
The STORM features an easy to read display with function buttons and LEDs to show operating modes, a key switch to prevent unauthorised operation, remote shutdown and IEC power input and output. The comfortable adjustable bracket and a locking ring allow for reliable assembly of the projector.
Product type
LED Lighting Effects
Type
LED / Laser / Effects
Colour Spectrum Derby Effect
RGBWA
Number of LEDs Derby Effect
5
LED Type Derby Effect
3 W
Dispersion Derby Effect
68 °
Colour Spectrum Laser Effect
green LED (532 nm) , red LED (650 nm)
Number of Diodes Laser Effect
1 x green , 1 x red
Type of Diodes Laser Effect
red 100 mW, green 50 mW (DPSS laser)
Beam Angle Laser Effect
74 °
Laser Class Laser Effect
3R
Laser Shutdown (safety function)
connection for external emergency stop switch , Remote connection
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.