CAMEO INSTANT AIR 2000 PRO Wind Machine with Adjustable Fan Speed and Air Flow Direction

• Professional high velocity wind machine
• Max. air flow 56 m³ per minute
• Whisper-quiet 31 cm fan
• Fan speed adjustable from 1 - 100 in 1% increments
• Continuously adjustable air flow direction
• DMX control or standalone operation
• RF remote control included
• Floor standing or hanging applications

Adding touches of drama and dynamics to any event, the Cameo Instant Air 2000 Pro is a professional high velocity wind machine producing a powerful 56 m³ air flow per minute. It generates a wide range of wind effects from a gentle breeze to strong, heavy gusts sporting precision fan speed control in one percent increments and continuously adjustable air flow direction.

The Instant Air 2000 Pro can be operated via DMX or in standalone mode and includes a convenient RF remote control. It features 3-pin and 5-pin DMX inputs and outputs, an easy-to-read LED display and virtually silent operation thanks to its ultra quiet 31 cm fan. Designed for both floor standing applications and hanging from trusses, the Cameo Instant Air 2000 Pro is ideal for fashion shows, film and photo studios, theatres, theme parks and live concerts. It is also the perfect addition to fog and haze machines and enhances their performance.

The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.

Specification

» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid

Digital technology and a new Design

The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.

Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.

Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer 
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany

Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
              110 V / 60 Hz
Warm up time approx.  7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
.                                   35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at Control: DMX 512
             0 ? 10 V analog
             Stand-alone-Mode
             Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
                                       Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg

JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.

• Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
• DMX 512 as standard

• Internal timer

• Control panel

• Robust flightcase version