Content | The quick reaction time of the Cameo PHANTOM 5 fog machine means that you are always ready onstage - perfect for small rental companies, DJs and musicians. With a 1,500 watt heating element and an output volume of 509 m3/min, it creates very uniform fog after a warm-up time of only 4 minutes. A fog range of around 7 meters means that the Cameo PHANTOM F5 is also suitable for medium-sized stages. It's the perfect basis for sophisticated and atmospheric light shows!
The quick reaction time is made possible by intelligent software and components that are optimally coordinated with one another. The pump and heating are coordinated so that fog can be emitted faster. The tank has a capacity of 1.8 litres and can be easily taken out of the housing for filling. Integrated two-coloured tank illumination means that it's always easy to see how much fluid is left in the device. Configuration takes place either via the LED display on the fog machine itself or using the included multi-function remote control. In addition to stand-alone operation, the Cameo PHANTOM F5 can also be controlled via DMX.
The two-coloured housing, in black and cool grey, makes the fog machine a real attention-grabber, and the included U-bracket makes hanging it on a stand or a truss easy.
Output volume
ca. 509 m³/min
Range of fog output
approx. 7 m
Warm-up time
approx. 3 min
Fluid tank capacity
1.8 l
Fluid Consumption
ca. 90 ml/min
Remote connection
DIN 5-Pol male
Remote functions
Continous output , Duration , Interval , manual , Time , volume
DMX output
XLR 3-pin female
DMX mode
1-channel , 3-channel
DMX Functions
Fog output on/off , Timer Duration , Timer Interval
Controls
Down , Enter , Mode , Up
Indicators
4-digit LED display
Operating voltage
230 V AC / 50-60 Hz
Ambient temperature ( in operation )
5 - 40 °C
Relative Humidity
< 85 %, not condensing
Power connector
CEE 7/7 , Fixed connection cable
Cabinet colour
Black , grey
Accessories (included)
4 rubber feet , Cable remote , canister
|
MDG Ice Fog Q Low Fog Machine 2850W
Extremely quiet, adjustable low fog output
Self-contained unit on wheels for easy transport
Compartments for accessories
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included
The quietest low fog generator on the market
Low fluid consumption (0.09 L/3 oz per minute at full output)
Can be placed closer to the action
TECHNICAL DATA
ICE FOG Compack
Fluid consumption 0.09 L (3 oz)
(per minute at full output)
Liquid CO2 type Low pressure refrigerated
Liquid CO2 consumption
(per minute) 3 L (6.8 lb) at 1500 kPa (225 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Fog colour Pure white
Particle size 0.5-4.5 microns
CO2 running time Low pressure version:
180 L (48 US gallon)
canister (DEWAR) = 70 minutes
Warm-up time (maximum) 8 minutes
Fluid type MDG Low Fog Fluid
(M.S.D.S. available on request)
Operating voltage 230 VAC, 50/60 Hz
Power consumption 2,850 W
Dimensions Total length 1.15 m
Operating length 1.71 m
Width 1.51 m
Height 67 cm
Weight 113 kg (250 lb)
Approval CE approved, CSA
and UL pending
Included Remote control ? 8 m (26 ft) 5-pin XLR
extension cable ? 2.5 m (8 ft) long x
13 cm (5 in) diameter fog output conduit
? 3 m (10 ft) insulated low-pressure
liquid CO2 input hose with gauge.
|
MDG MAX 3000 APS Smoke Machine 715W
Extremely powerful,adjustable fog output Virtually noiseless, with the finest fog and the longest hanging times Automatic Purging System (APS) to prevent build-up and clogging Compatible with remote control timer and DMX interface Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute) Portability option
TECHNICAL DATA MAX 3000APS Maximum fog output 85 m3 (3,000 ft3) per minute Fluid consumption 1 L (34 oz) per hour at 2.76 bar (40 psi) Gas type CO2 or N2 Gas consumption 0.97 kg (2.13 lb) per hour at 2.76 bar (40 psi) Reservoir capacity 2.5 L (0.66 US gallon) Automatic Purging Standard feature System (APS) Fog colour Pure white Particle size 0.5-0.7 microns Warm-up time (maximum) 8 minutes Fluid type MDG Neutral Fluid (M.S.D.S. available on request) Operating voltage 115 or 230 VAC, 50/60 Hz Power consumption 715 W Dimensions Length 61 cm (24?) Width 18 cm (7?) Height 30 cm (12?) Weight 20 kg (43 lb) Shipping weight 33 kg (72 lb) (with flight case) Approval CE approved, CSA and UL pending |
JEM Magnum Pro 2000 Foger. Special long lasting and reliable heating unit. Variable fog output incl. timer. 1650W, 0.2l/min. Fluid at max power. aprox.13Kg with out fluid, Dimensions of Machine: 695mm x 356mm x 325mm
Specifications :
-
700 m³/min fog output
-
1600 W heat exchanger
-
8 min heat-up time
-
Continuous output
-
Optional DMX
-
Floor standing or truss mounting
-
9.5 liter fluid capacity
-
Different fluid options for different applications
-
DMX with optional DMX interface module
-
On-board control panel
-
Removable panel for remote control
-
Timer and output level remote control
|
Digital technology and a new Design
The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.
Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany
Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
110 V / 60 Hz
Warm up time approx. 7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
. 35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at
Control: DMX 512
0 ? 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg
| 1200 watt fogger with DMX
- Continuous output
- Rugged metal housing with handle, mounting bracket and safety eyelet
- Heating element with Unicore technology
- Economic temperature control of the heating element
- Adjustable timer with interval, duration and output volume, continuous output, manual activation
- Output distance: Approx. 7 m
- Control via Wireless remote control (optional); DMX; wired remote control
- For application areas such as: Party room; Clubs/dancing school; restaurants, bars and hotels
- Removable tank with level indication
- Operates on water-based fluid
Package contents
- 1 x device, 1 x user manual, 1 x mounting bracket, 1 x remote control, 2 x knurled screw, 2 x screw, 4 x washer, 1 x container, 1 x tube, 1 x filter
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
1200 W |
IP classification: |
IP20 |
Power connection: |
Fixed power supply cord with safety plug |
Warm-up time: |
Approx. 6 min |
Output volume: |
Approx. 510 m³/min |
Output distance: |
Approx. 7 m |
Tank capacity: |
2,5 l water-based fluid removable tank |
Fluid consumption: |
Approx. 70 ml/min |
DMX channels: |
1 |
DMX input: |
1 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Control: |
Wireless remote control (optional); DMX; wired remote control |
Housing color: |
Grey |
Heater: |
1100 W |
Color: |
Grey |
Dimensions: |
Width: 25 cm
Depth: 48 cm
Height: 26 cm |
Weight: |
11,50 kg |
Accessories/ordering info:
Remote: Z-8 (included)
Cable Length: 10 m
Connector DMX: 3 Pin XLR in-out
Connector remote: 6,3 mm Stereo Jack
Functions: timer with interval,
duration and volume;
Continuous fogging; manual on/off
Compatible With: Z-1200II, ICE-101,
LCU-1
Optional:
Z-9 Wireless Remote: Ordernr: 60698
|
Reviews
There are no reviews yet.