| Content | The quick reaction time of the Cameo PHANTOM 5 fog machine means that you are always ready onstage - perfect for small rental companies, DJs and musicians. With a 1,500 watt heating element and an output volume of 509 m3/min, it creates very uniform fog after a warm-up time of only 4 minutes. A fog range of around 7 meters means that the Cameo PHANTOM F5 is also suitable for medium-sized stages. It's the perfect basis for sophisticated and atmospheric light shows!
The quick reaction time is made possible by intelligent software and components that are optimally coordinated with one another. The pump and heating are coordinated so that fog can be emitted faster. The tank has a capacity of 1.8 litres and can be easily taken out of the housing for filling. Integrated two-coloured tank illumination means that it's always easy to see how much fluid is left in the device. Configuration takes place either via the LED display on the fog machine itself or using the included multi-function remote control. In addition to stand-alone operation, the Cameo PHANTOM F5 can also be controlled via DMX.
The two-coloured housing, in black and cool grey, makes the fog machine a real attention-grabber, and the included U-bracket makes hanging it on a stand or a truss easy.
Output volume
ca. 509 m³/min
Range of fog output
approx. 7 m
Warm-up time
approx. 3 min
Fluid tank capacity
1.8 l
Fluid Consumption
ca. 90 ml/min
Remote connection
DIN 5-Pol male
Remote functions
Continous output , Duration , Interval , manual , Time , volume
DMX output
XLR 3-pin female
DMX mode
1-channel , 3-channel
DMX Functions
Fog output on/off , Timer Duration , Timer Interval
Controls
Down , Enter , Mode , Up
Indicators
4-digit LED display
Operating voltage
230 V AC / 50-60 Hz
Ambient temperature ( in operation )
5 - 40 °C
Relative Humidity
< 85 %, not condensing
Power connector
CEE 7/7 , Fixed connection cable
Cabinet colour
Black , grey
Accessories (included)
4 rubber feet , Cable remote , canister
|
MDG MAX 3000 APS Smoke Machine 715W
Extremely powerful,adjustable fog output
Virtually noiseless, with the finest fog and the longest hanging times
Automatic Purging System (APS) to prevent build-up and clogging
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute)
Portability option
TECHNICAL DATA
MAX 3000APS
Maximum fog output 85 m3 (3,000 ft3)
per minute
Fluid consumption 1 L (34 oz)
per hour at 2.76 bar (40 psi)
Gas type CO2 or N2
Gas consumption 0.97 kg (2.13 lb)
per hour at 2.76 bar (40 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Automatic Purging Standard feature
System (APS)
Fog colour Pure white
Particle size 0.5-0.7 microns
Warm-up time (maximum) 8 minutes
Fluid type MDG Neutral Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC,
50/60 Hz
Power consumption 715 W
Dimensions Length 61 cm (24?)
Width 18 cm (7?)
Height 30 cm (12?)
Weight 20 kg (43 lb)
Shipping weight 33 kg (72 lb)
(with flight case)
Approval CE approved, CSA
and UL pending |
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid
|
Digital technology and a new Design
The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.
Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany
Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
110 V / 60 Hz
Warm up time approx. 7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
. 35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at
Control: DMX 512
0 ? 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg
| Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg | DMX-controlled smoke-machine
* Powerful smoke-machine for medium-sized discotheques or medium-sized stages
* Control via comfortable remote-control with LCD-display
* LED Fluidlevel-display
* Pump stops automatically when the fluid is depleted
* DMX-control via every standard DMX-controller
* Without mounting-bracket for standing installation
* Wide range of accessories available
SPECIFICATIONS:
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
1500 W |
| IP classification: |
IP20 |
| Power connection: |
Fixed power supply cord with safety plug |
| Warm-up time: |
Approx. 2 min |
| Output volume: |
Approx. 430 m³/min |
| Output distance: |
Approx. 3 m |
| Tank capacity: |
2,3 l |
| Fluid consumption: |
Approx. 30 ml/min |
| DMX channels: |
1 |
| DMX input: |
1 x 3-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version |
| Control: |
DMX; Wireless remote control; wired remote control |
| Housing color: |
Silver |
| Attachment system: |
Mounting bracket |
| Carrier frequency: |
433,92 MHz |
| Color: |
Silver |
| Dimensions: |
Width: 27,5 cm
Depth: 40 cm
Height: 28 cm |
| Weight: |
6,00 kg |
| Remote control |
| Cable length: |
3 m |
| Battery: |
1 x 12 V 23AE alkaline manganese built-in |
|
Reviews
There are no reviews yet.