Content |
Ecolabel [3,46 MB]
User's manual [3,16 MB]
|
|
| 12 x 12 W RGBWA+UV LED Bar black
The Cameo PixBar 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR600PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 12
- LED Type: 12 W
- Refresh Rate: 3,600 Hz
- Beam Angle: 23° at 600 lx, 41° at 1120lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 74-channel, 78-channel
- DMX Functions: Single Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 160 W
- Power Connector: Neutrik PowerCon
- Housing Material: aluminium/metal
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 900 mm
- Height: 120 mm
- Length: 75 mm
|
|
- Type : Multi Light Bar
- Number & Colors Led : 2X Rgb
- Led Power (W) : 9Watt
- Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
- Strobe : 4 X 1 Watt White Leds
- Other : 3W Red, 3W Green & 3W Blue Led for every derby
- Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
- Channels Dmx512 : 3, 5, 6, 9 or 27
- Input / Output Dmx512 : 3Pin xlr
- Power Input / Output : IEC
- Power supply (V) : 100/240 V ac, 50/60 Hz
- Consumption (W) : 48
- Dimensions (mm) : 1185 x 386 x 110
- Weight (kg) : 6.6 bar / 8.35 with case
|
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
50 W |
IP classification: |
IP20 |
Protection class: |
Protection class I |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Power output: |
1 x IEC connector (F) mounting version |
Device fuse: |
5 x 20 mm, F 1 A Fuse replaceable |
Lamp type: |
LED lamp |
Flash rate: |
0 - 30 Hz |
DMX channels: |
3; 5; 9; 27 |
DMX input: |
1 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Cooling: |
Cooling fan |
Control: |
Stand-alone; DMX; IR remote control; Sound to light via Microphone; Wireless footswitch; Master/slave function; Light´J; LED PC-Control 512; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3 |
Housing color: |
Black |
Attachment system: |
2x Mounting bracket |
Dimensions: |
Width: 1,32 m
Depth: 14,5 cm
Height: 32 cm |
Weight: |
9,05 kg |
Noise classification: |
Class 2 (slight noise) |
Laser |
Laser class: |
2M |
Laser color: |
R/G |
Laser module: |
Red (R) 100 mW 650nm
Green (G) 30 mW 532nm |
Spotlight |
LED: |
3 x 3 W high-power 3in1 TCL RGB (homogenous color mix) |
Beam angle: |
13° |
Beam angle (1/2 peak): |
13° |
Beam angle (1/10 peak): |
20° |
Light effect |
LED: |
3 x 1 W high-power R/G/B |
Bar |
LED: |
4 x 1 W high-power cold white (CW) |
Beam angle (1/2 peak): |
7° |
Foot control |
Battery: |
1 x 9.0 V E block 6LR61 alkaline manganese included |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
|
Beam Light Laser Projector 6 Eyes Stage Lighting Effect Bar Moving Head Light DJ Party Disco Wedding DMX Controller
This product can be used to control multiple devices through the console, or the console can be used to light the laser and beam separately. It has dual effects and is very suitable for stage, KTV, bar and other entertainment places
1. It supports DMX512. For more functions, see the detailed parameters on the details page.
2. They are six laser+beam models, and the effect is very good. Please see the main picture video for the real effect
6 Beam+6 Laser
Voltage: AC110/220V 50-60HZ beam:10W LED*6PCS
Red laser:500mw*6pcs power: 100W
Auto, sound , master-slave, DMX512, SIZE:95*8*15cm
Net weight: 5.5KG
1pcs packing: 101.5*17*24cm 7Kg
2pcs packing: 101.5*34*24Cm(2pcs/ctn )14Kg
|
The Cameo PixBar 400 PRO is a professional LED bar with 12 ultra bright 8 watt Quad-LEDs and RDM compatibility enabling bi-directional communication. It provides vibrant RGBW colour mixes, 4 selectable dimming curves, macros calibrated to the LEE filters standard and single pixel control for stunning chase effects.
Attached to a dedicated controller the RDM protocol enhancement allows convenient addressing, configuration and status monitoring of the PixBar 400 PRO. The fixture is also capable of standard DMX control in 7 modes and standalone, master or slave operation. It features autorun software, a built-in microphone for music control and a backlit display with Mode, Enter, Up and Down keys for manual control.
With highly efficient convection cooling the PixBar 400 PRO is absolutely noiseless, and the 3,600 Hz refresh rate ensures flicker free performance. Additional features of the fixture are colour temperature correction and 3 temperatures of white: warm white, white, cool white.
The PixBar 400 PRO comes in a rugged aluminium enclosure with 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and a solid stand that doubles as mounting bracket.
SPECIFICATIONS:
- Product number: PIXBAR400PRO
- Product type:LED BAR
- Type: Washer
- Colour spectrum: RGBW
- Number of LEDs: 12
- LED type: 8W 4in1
- Refresh rate: 3600Hz
- Dispersion: 18°
- DMX input: XLR 3-pin male, XLR 5-pin male
- DMX output: XLR 3-pin female, XLR 5-pin female
- DMX mode: 2-channel, 4-1-channel, 4-2-channel, 6-channel, 10-channel, 50-channel, 54-channel
- DMX functions: pixel control, 14 auto-modes, sound mode, colour macros, dimmer, strobe, colour temperature correction
- Standalone modes: 14 auto-modes, sound Mode, static, strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC-Display
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 75W
- Power connector: Neutrik PowerCon
- Housing material: die-cast aluminum
- Cabinet colour: black
- Cooling: Convection
- Illuminance: single LED 880lux 1m
Dimensions without mounting bracket
- Width: 900mm
- Height: 117mm
- Depth: 70mm
- Dimensions of mounting bracket (incl. rubber feet) 495 x 140 x 100 mm
|
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
80 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Cable length: |
Approx. 1,1 m |
Power output: |
1 x IEC connector (F) mounting version |
Lamp type: |
LED lamp |
DMX channels: |
3; 4; 8; 21 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; DMX; IR remote control; Sound to light via Microphone; Master/slave function; QuickDMX via 5-pin XLR (M) mounting version (optional); EASY SHOW 1; LED PC-Control 512; Light Captain; EASY SHOW 2; EASY SHOW 3; Light´J |
Beam angle: |
9° |
Beam angle (1/2 peak): |
9° |
Beam angle (1/10 peak): |
18° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
Monochrome 4 digits 7-segment LED display |
Dimensions: |
Width: 60,5 cm
Depth: 14 cm
Height: 23 cm |
Weight: |
4,85 kg |
Noise classification: |
Class 0 (no noise at all) |
Spotlight |
LED: |
4 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
Bar |
LED: |
4 x 1 W high-power cold white (CW) |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
Reviews
There are no reviews yet.