| Content |
Ecolabel [3,46 MB]
User's manual [3,16 MB]
|
|
| | 12 x 12 W RGBWA+UV LED Bar black
The Cameo PixBar 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR600PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 12
- LED Type: 12 W
- Refresh Rate: 3,600 Hz
- Beam Angle: 23° at 600 lx, 41° at 1120lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 74-channel, 78-channel
- DMX Functions: Single Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 160 W
- Power Connector: Neutrik PowerCon
- Housing Material: aluminium/metal
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 900 mm
- Height: 120 mm
- Length: 75 mm
|
|
The Cameo PixBar 400 PRO is a professional LED bar with 12 ultra bright 8 watt Quad-LEDs and RDM compatibility enabling bi-directional communication. It provides vibrant RGBW colour mixes, 4 selectable dimming curves, macros calibrated to the LEE filters standard and single pixel control for stunning chase effects.
Attached to a dedicated controller the RDM protocol enhancement allows convenient addressing, configuration and status monitoring of the PixBar 400 PRO. The fixture is also capable of standard DMX control in 7 modes and standalone, master or slave operation. It features autorun software, a built-in microphone for music control and a backlit display with Mode, Enter, Up and Down keys for manual control.
With highly efficient convection cooling the PixBar 400 PRO is absolutely noiseless, and the 3,600 Hz refresh rate ensures flicker free performance. Additional features of the fixture are colour temperature correction and 3 temperatures of white: warm white, white, cool white.
The PixBar 400 PRO comes in a rugged aluminium enclosure with 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and a solid stand that doubles as mounting bracket.
SPECIFICATIONS:
- Product number: PIXBAR400PRO
- Product type:LED BAR
- Type: Washer
- Colour spectrum: RGBW
- Number of LEDs: 12
- LED type: 8W 4in1
- Refresh rate: 3600Hz
- Dispersion: 18°
- DMX input: XLR 3-pin male, XLR 5-pin male
- DMX output: XLR 3-pin female, XLR 5-pin female
- DMX mode: 2-channel, 4-1-channel, 4-2-channel, 6-channel, 10-channel, 50-channel, 54-channel
- DMX functions: pixel control, 14 auto-modes, sound mode, colour macros, dimmer, strobe, colour temperature correction
- Standalone modes: 14 auto-modes, sound Mode, static, strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC-Display
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 75W
- Power connector: Neutrik PowerCon
- Housing material: die-cast aluminum
- Cabinet colour: black
- Cooling: Convection
- Illuminance: single LED 880lux 1m
Dimensions without mounting bracket
- Width: 900mm
- Height: 117mm
- Depth: 70mm
- Dimensions of mounting bracket (incl. rubber feet) 495 x 140 x 100 mm
|
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
90 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
| Power output: |
2 x IEC connector (F) mounting version |
| Fuse: |
T 1 A Fuse replaceable |
| Lamp type: |
LED lamp |
| DMX channels: |
3; 4; 6; 8; 9; 11; 21; 24; 29 |
| DMX input: |
3-pin XLR (M) mounting version |
| DMX output: |
3-pin XLR (F) mounting version |
| Cooling: |
Passive convection cooling |
| Control: |
IR remote control; stand-alone; Sound to light via Microphone; DMX; Master/slave function; EASY SHOW 1; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional); Light Captain; EASY SHOW 2; EASY SHOW 3 |
| Beam angle: |
9° |
| Beam angle (1/2 peak): |
9° |
| Beam angle (1/10 peak): |
18 |
| Housing color: |
Black |
| Display type: |
4 digits 7-segment LED display |
| Dimensions: |
Width: 92,6 cm
Depth: 14,6 cm
Height: 26,7 cm |
| Weight: |
6,00 kg |
| Spotlight |
| LED: |
4 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
| Bar |
| LED: |
6 x 1 W high-power cold white (CW) |
| Flash rate: |
0 - 20 Hz |
| Remote control |
| Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
| Legal specifications |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
|
The Cameo PixBar 650C PRO is a 53° beam width professional LED bar with 8 ultra bright 30 watt COB-LEDs for solid colour mixing with seamless transition. Highly efficient convection cooling and a 3,600 Hz refresh rate ensure absolutely noiseless operation and flicker free performance.
The PixBar 650C PRO is fully RDM compatible for bi-directional communication with a dedicated controller providing addressing, configuration and status reporting of the fixture. It is capable of standard DMX control in 5 modes and standalone, master or slave operation. The PixBar 450C PRO also features autorun software, a built-in microphone for sound control and a backlit display with Mode, Enter, Up and Down keys for manual control.
In addition to rich RGB colours and macros calibrated to the LEE filters standard the PixBar 650C PRO provides colour temperature correction, 4 selectable dimming curves and single pixel control for impressive chase effects.
The fixture's rugged aluminium enclosure features 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and an adjustable stand that doubles as mounting bracket.
- Product number: CLPIXBAR650CPRO
- Product type:LED BAR
- Type: Washer
- Colour spectrum: RGB
- Number of LEDs: 8
- LED type: 30W COB
- Refresh rate: 3000Hz
- Dispersion: 53°
- DMX input: XLR 3-pin male, XLR 5-pin male
- DMX output: XLR 3-pin female, XLR 5-pin female
- DMX mode: 2-channel, 3-channel, 3-channel, 9-channel, 30-channel
- DMX functions: Pixel Control, 13 Auto-Modes, Sound Mode, Colour Macros, Dimmer, Strobe, Colour temperature correction
- Standalone modes: Auto Run, 14 Auto-Modes, Sound Mode, Static,Strobe
- Controls: Mode,Enter,Up,Down
- Indicators: LC-Display
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 250W
- Power connector: Neutrik powerCON
- Housing material: Aluminium
- Cabinet colour: black
- Cooling: Convection
- Illuminance: 3770lx 1m
- Dimensions without mounting bracket
- Width: 880mm
- Height: 110mm
- Depth: 130mm
- Dimensions of mounting brackets (incl. rubber feet) 495 x 140 x 100 mm
|
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
45 W |
| IP classification: |
IP20 |
| Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug |
| Power output: |
IEC connector (F) mounting version |
| Fuse: |
T 1 A Fuse replaceable |
| Lamp type: |
LED lamp |
| DMX channels: |
2; 9; 21 |
| DMX input: |
3-pin XLR (F) mounting version |
| DMX output: |
3-pin XLR (M) mounting version |
| Cooling: |
Passive convection cooling |
| Control: |
DMX; IR remote control; stand-alone; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional); Light Captain; EASY SHOW 2; EASY SHOW 3; Light´J |
| Beam angle: |
18° |
| Beam angle (1/2 peak): |
Wash effect 18°
Multi beam effect 90° multicolor |
| Housing color: |
Black |
| Display type: |
4 digits 7-segment LED display |
| Dimensions: |
Width: 62,5 cm
Depth: 15,5 cm
Height: 22,4 cm |
| Weight: |
4,70 kg |
| Noise classification: |
Class 0 (no noise at all) |
| Spotlight |
| LED: |
3 x 8 W COB (chip-on-board) 4in1 QCL RGBW (homogenous color mix) |
| Light effect |
| LED: |
4 x 3 W high-power R/G/B/W |
| Remote control |
| Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
| Legal specifications |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
| LED light effect bar with RGB color mixing, incl. IR remote control
- 6 high-power 30 W RGB LEDs (COB)
- Built-in auto and music show programs
- Direct color selection for 18 preset colors
- Stepless RGB color blend, color change, color fade, dimmer and strobe effect
- Addressing and setting via control panel with 4-digit LED display
- Convenient wireless control via included IR remote control EUROLITE IR-7
- Supports QuickDMX - the wireless DMX system from Eurolite
- Built-in phantom-powered USB port for QuickDMX, CRMX and WDMX receivers (optional)
- Swivel mounting bracket
- P-Con terminals for power linking up to 8 units
- LED: 6 x COB (chip-on-board) 30 W 3in1 TCL RGB (homogenous color mix)
- Can be operated in 2; 3; 5; 9; 18; 21 CH mode
- The device is cooled by super silent fan
- Controlling by IR remote control; Sound to light via Microphone; Master/slave function; DMX; Stand-alone
- Preprogrammed in Light?J; LED PC-Control 512; EASY SHOW; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE
- Flicker-free projection |
Reviews
There are no reviews yet.