| Content |
Ecolabel [3,16 MB]
User's manual [3,16 MB]
|
|
| |
The Cameo PixBar 500 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 6 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 500 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 500 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR500PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 6
- LED Type: 12 W
- Refresh Rate: 3,600Hz
- Beam Angle: 23° at 600 lx, 41° at 1120 lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 38-channel, 42-channel
- DMX Functions: Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone Modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 90 W
- Power Connector: Neutrik PowerCon
- Housing Material: die-cast aluminium
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 450 mm
- Height: 120 mm
- Length: 75 mm
|
|
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
50 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
| Power output: |
1 x IEC connector (F) mounting version |
| Device fuse: |
5 x 20 mm, F 1 A Fuse replaceable |
| Lamp type: |
LED lamp |
| Flash rate: |
0 - 30 Hz |
| DMX channels: |
3; 5; 9; 27 |
| DMX input: |
1 x 3-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version |
| Cooling: |
Cooling fan |
| Control: |
Stand-alone; DMX; IR remote control; Sound to light via Microphone; Wireless footswitch; Master/slave function; Light´J; LED PC-Control 512; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3 |
| Housing color: |
Black |
| Attachment system: |
2x Mounting bracket |
| Dimensions: |
Width: 1,32 m
Depth: 14,5 cm
Height: 32 cm |
| Weight: |
9,05 kg |
| Noise classification: |
Class 2 (slight noise) |
| Laser |
| Laser class: |
2M |
| Laser color: |
R/G |
| Laser module: |
Red (R) 100 mW 650nm
Green (G) 30 mW 532nm |
| Spotlight |
| LED: |
3 x 3 W high-power 3in1 TCL RGB (homogenous color mix) |
| Beam angle: |
13° |
| Beam angle (1/2 peak): |
13° |
| Beam angle (1/10 peak): |
20° |
| Light effect |
| LED: |
3 x 1 W high-power R/G/B |
| Bar |
| LED: |
4 x 1 W high-power cold white (CW) |
| Beam angle (1/2 peak): |
7° |
| Foot control |
| Battery: |
1 x 9.0 V E block 6LR61 alkaline manganese included |
| Remote control |
| Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
|
The Cameo PixBar 650C PRO is a 53° beam width professional LED bar with 8 ultra bright 30 watt COB-LEDs for solid colour mixing with seamless transition. Highly efficient convection cooling and a 3,600 Hz refresh rate ensure absolutely noiseless operation and flicker free performance.
The PixBar 650C PRO is fully RDM compatible for bi-directional communication with a dedicated controller providing addressing, configuration and status reporting of the fixture. It is capable of standard DMX control in 5 modes and standalone, master or slave operation. The PixBar 450C PRO also features autorun software, a built-in microphone for sound control and a backlit display with Mode, Enter, Up and Down keys for manual control.
In addition to rich RGB colours and macros calibrated to the LEE filters standard the PixBar 650C PRO provides colour temperature correction, 4 selectable dimming curves and single pixel control for impressive chase effects.
The fixture's rugged aluminium enclosure features 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and an adjustable stand that doubles as mounting bracket.
- Product number: CLPIXBAR650CPRO
- Product type:LED BAR
- Type: Washer
- Colour spectrum: RGB
- Number of LEDs: 8
- LED type: 30W COB
- Refresh rate: 3000Hz
- Dispersion: 53°
- DMX input: XLR 3-pin male, XLR 5-pin male
- DMX output: XLR 3-pin female, XLR 5-pin female
- DMX mode: 2-channel, 3-channel, 3-channel, 9-channel, 30-channel
- DMX functions: Pixel Control, 13 Auto-Modes, Sound Mode, Colour Macros, Dimmer, Strobe, Colour temperature correction
- Standalone modes: Auto Run, 14 Auto-Modes, Sound Mode, Static,Strobe
- Controls: Mode,Enter,Up,Down
- Indicators: LC-Display
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 250W
- Power connector: Neutrik powerCON
- Housing material: Aluminium
- Cabinet colour: black
- Cooling: Convection
- Illuminance: 3770lx 1m
- Dimensions without mounting bracket
- Width: 880mm
- Height: 110mm
- Depth: 130mm
- Dimensions of mounting brackets (incl. rubber feet) 495 x 140 x 100 mm
|
- 12 x 10 watt Tri-LEDs 3-in-1 Cool White, Warm White and Amber
- Full white temperature control from Tungsten to CW (1,600 - 6,800 K)
- CRI 97 @ 2,800 K for natural colour rendering
- Dim to Warm (DTW) technology to emulate halogen-style dimming
- Single pixel control for stunning chase and pixel mapping effects
- Selectable 16-bit dimming curves and response
- RDM enabled
- 9 DMX modes plus sound activation and automated operation
- Highly efficient convection cooling for noiseless operation
- Flicker free for use in TV and film applications
- Glare shield and frost filter included
- Omega bracket set available as accessory
Featuring twelve 10 watt 3-in-1 cool white, warm white and amber Tri-LEDs, the Cameo PIXBAR DTW PRO permits full white temperature control from warm Tungsten white to ultra bright cool white. The professional LED bar features an 18° beam angle and Dim-to-Warm technology to emulate the smooth dimming of halogen lamps. Highly efficient convection cooling and a 3,000 Hz refresh rate ensure absolutely noiseless and flicker-free operation making it a perfect choice for TV and film applications.
The PIXBAR DTW PRO is RDM enabled and provides 9 modes of DMX control, sound activation plus automated operation. The fixture includes single pixel control for impressive chase effects and pixel mapping, a high-speed strobe and selectable 16-bit dimming curves with adjustable response. A 4-button display enables easy configuration. The rugged aluminium housing features 3 and 5-pin DMX and Neutrik powerCON inputs and outputs that enable convenient daisy chaining. The PIXBAR DTW PRO comes with a glare shield and frost filter if softer washes are called for.
Product type
LED Bars
Type
Washer
Colour spectrum
cold white , warm white , yellow
Number of LEDs
12
LED type
10 W (ca. 50000 operating hours)
Refresh rate
3000 Hz
Dispersion
18° Beam, 30° Beam Field (without Diffusor) °
Lens
PE
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
1-channel , 13-channel , 2-channel , 3-channel , 36-channel , 49-Channel , 6-channel , 9-channel
DMX Functions
Auto Mode , Automode-Speed , Color Temperature , Dim LEDs seperate , Dim to Warm , Dimmer , Sound to Light , strobe
Standalone modes
Master / Slave mode , Static
Controls
Enter , Mode , Value Down , Value Up
Indicators
LC display
Operating voltage
Glare Shield , Neutrik Power Cable
Power consumption
130 W
Power connector
Neutrik powerCON IN / OUT
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
20
Cooling
Convection Cooling
Luminous flux
3240 lm
Efficiency
25 lm/W
Operating Temperature
-15 - 45 °C
Dimensions including Mounting Bracket
Width
93 mm
Height
130 mm
Length
900 mm
Weight
7,8 kg
Accessories (included)
FROST Filter , Glare Shield , Neutrik Power Cable
|
Beam Light Laser Projector 6 Eyes Stage Lighting Effect Bar Moving Head Light DJ Party Disco Wedding DMX Controller
This product can be used to control multiple devices through the console, or the console can be used to light the laser and beam separately. It has dual effects and is very suitable for stage, KTV, bar and other entertainment places
1. It supports DMX512. For more functions, see the detailed parameters on the details page.
2. They are six laser+beam models, and the effect is very good. Please see the main picture video for the real effect
6 Beam+6 Laser
Voltage: AC110/220V 50-60HZ beam:10W LED*6PCS
Red laser:500mw*6pcs power: 100W
Auto, sound , master-slave, DMX512, SIZE:95*8*15cm
Net weight: 5.5KG
1pcs packing: 101.5*17*24cm 7Kg
2pcs packing: 101.5*34*24Cm（2pcs/ctn ）14Kg
|
| EUROLITE LED PIX-12 HCL Bar |
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
60 W |
| IP classification: |
IP20 |
| Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
| Power output: |
IEC connector (F) mounting version |
| Fuse: |
T 2 A Fuse replaceable |
| Lamp type: |
LED lamp |
| LED: |
12 x 10 W high-power 6in1 HCL RGBWA/UV (homogenous color mix) |
| DMX channels: |
4; 6; 16; 36; 74 |
| DMX input: |
3-pin XLR (M) mounting version |
| DMX output: |
3-pin XLR (F) mounting version |
| Cooling: |
Cooling fan |
| Control: |
Stand-alone; DMX; Sound to light via Microphone; Master/slave function; IR remote control |
| Preprogrammed in: |
Light´J; LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain; EASY SHOW 2; EASY SHOW 3 |
| Beam angle: |
20° |
| Beam angle (1/2 peak): |
20° |
| Beam angle (1/10 peak): |
41° |
| Housing color: |
Black |
| Attachment system: |
Mounting bracket |
| Dimensions: |
Length: 1 m
Depth: 11,5 cm
Height: 16,5 cm |
| Weight: |
5,20 kg |
| Photobiological safety: |
Risk Group 0 |
|
Remote control |
| Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
|
Legal specifications |
| Special product: |
Not designed for household room illumination |
| Intended use: |
Show effect lighting |
|
EUROLITE DMX LED EASY Operator 4x6 |
| Power supply: |
100-240 V AC, 50/60 Hz
9 V DC 800 mA |
| Power consumption: |
10 W |
| IP classification: |
IP20 |
| Power connection: |
Mains input via Coaxial power connector (M) mounting version power supply cord with AC adapter (provided) |
| DMX channels: |
Output 28 |
| Control: |
DMX; Sound to light via Microphone; stand-alone |
| Housing color: |
Black |
| Color: |
Black |
| Housing design: |
Desktop console housing |
| Dimensions: |
Width: 25 cm
Depth: 11,5 cm
Height: 5,5 cm |
| Weight: |
1,04 kg |
|
Reviews
There are no reviews yet.