Content |
- 12 x 10 watt Tri-LEDs 3-in-1 Cool White, Warm White and Amber
- Full white temperature control from Tungsten to CW (1,600 - 6,800 K)
- CRI 97 @ 2,800 K for natural colour rendering
- Dim to Warm (DTW) technology to emulate halogen-style dimming
- Single pixel control for stunning chase and pixel mapping effects
- Selectable 16-bit dimming curves and response
- RDM enabled
- 9 DMX modes plus sound activation and automated operation
- Highly efficient convection cooling for noiseless operation
- Flicker free for use in TV and film applications
- Glare shield and frost filter included
- Omega bracket set available as accessory
Featuring twelve 10 watt 3-in-1 cool white, warm white and amber Tri-LEDs, the Cameo PIXBAR DTW PRO permits full white temperature control from warm Tungsten white to ultra bright cool white. The professional LED bar features an 18° beam angle and Dim-to-Warm technology to emulate the smooth dimming of halogen lamps. Highly efficient convection cooling and a 3,000 Hz refresh rate ensure absolutely noiseless and flicker-free operation making it a perfect choice for TV and film applications.
The PIXBAR DTW PRO is RDM enabled and provides 9 modes of DMX control, sound activation plus automated operation. The fixture includes single pixel control for impressive chase effects and pixel mapping, a high-speed strobe and selectable 16-bit dimming curves with adjustable response. A 4-button display enables easy configuration. The rugged aluminium housing features 3 and 5-pin DMX and Neutrik powerCON inputs and outputs that enable convenient daisy chaining. The PIXBAR DTW PRO comes with a glare shield and frost filter if softer washes are called for.
Product type
LED Bars
Type
Washer
Colour spectrum
cold white , warm white , yellow
Number of LEDs
12
LED type
10 W (ca. 50000 operating hours)
Refresh rate
3000 Hz
Dispersion
18° Beam, 30° Beam Field (without Diffusor) °
Lens
PE
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
1-channel , 13-channel , 2-channel , 3-channel , 36-channel , 49-Channel , 6-channel , 9-channel
DMX Functions
Auto Mode , Automode-Speed , Color Temperature , Dim LEDs seperate , Dim to Warm , Dimmer , Sound to Light , strobe
Standalone modes
Master / Slave mode , Static
Controls
Enter , Mode , Value Down , Value Up
Indicators
LC display
Operating voltage
Glare Shield , Neutrik Power Cable
Power consumption
130 W
Power connector
Neutrik powerCON IN / OUT
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
20
Cooling
Convection Cooling
Luminous flux
3240 lm
Efficiency
25 lm/W
Operating Temperature
-15 - 45 °C
Dimensions including Mounting Bracket
Width
93 mm
Height
130 mm
Length
900 mm
Weight
7,8 kg
Accessories (included)
FROST Filter , Glare Shield , Neutrik Power Cable
|
Power supply: |
12 V DC |
Power consumption: |
12 W |
IP classification: |
IP20 |
Protection class: |
Protection class III |
Power connection: |
Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided) |
LED: |
32 x SMD 5050 3in1 TCL RGB |
Flash rate: |
0 - 30 Hz |
Control: |
IR remote control |
Beam angle: |
300° |
Beam angle (1/2 peak): |
300° multicolor |
Housing color: |
White; semi-transparent |
Dimensions: |
Width: 20 cm
Height: 1 m
Diameter: Ø 5 cm |
Weight: |
370 g |
|
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
80 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Cable length: |
Approx. 1,1 m |
Power output: |
1 x IEC connector (F) mounting version |
Lamp type: |
LED lamp |
DMX channels: |
3; 4; 8; 21 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; DMX; IR remote control; Sound to light via Microphone; Master/slave function; QuickDMX via 5-pin XLR (M) mounting version (optional); EASY SHOW 1; LED PC-Control 512; Light Captain; EASY SHOW 2; EASY SHOW 3; Light´J |
Beam angle: |
9° |
Beam angle (1/2 peak): |
9° |
Beam angle (1/10 peak): |
18° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
Monochrome 4 digits 7-segment LED display |
Dimensions: |
Width: 60,5 cm
Depth: 14 cm
Height: 23 cm |
Weight: |
4,85 kg |
Noise classification: |
Class 0 (no noise at all) |
Spotlight |
LED: |
4 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
Bar |
LED: |
4 x 1 W high-power cold white (CW) |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
Ecolabel [3,46 MB]
User's manual [3,16 MB]
|
|
| 12 x 12 W RGBWA+UV LED Bar black
The Cameo PixBar 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR600PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 12
- LED Type: 12 W
- Refresh Rate: 3,600 Hz
- Beam Angle: 23° at 600 lx, 41° at 1120lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 74-channel, 78-channel
- DMX Functions: Single Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 160 W
- Power Connector: Neutrik PowerCon
- Housing Material: aluminium/metal
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 900 mm
- Height: 120 mm
- Length: 75 mm
|
|
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
90 W |
IP classification: |
IP20 |
Protection class: |
Protection class I |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Power output: |
2 x IEC connector (F) mounting version |
Fuse: |
T 1 A Fuse replaceable |
Lamp type: |
LED lamp |
DMX channels: |
3; 4; 6; 8; 9; 11; 21; 24; 29 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
IR remote control; stand-alone; Sound to light via Microphone; DMX; Master/slave function; EASY SHOW 1; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional); Light Captain; EASY SHOW 2; EASY SHOW 3 |
Beam angle: |
9° |
Beam angle (1/2 peak): |
9° |
Beam angle (1/10 peak): |
18 |
Housing color: |
Black |
Display type: |
4 digits 7-segment LED display |
Dimensions: |
Width: 92,6 cm
Depth: 14,6 cm
Height: 26,7 cm |
Weight: |
6,00 kg |
Spotlight |
LED: |
4 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
Bar |
LED: |
6 x 1 W high-power cold white (CW) |
Flash rate: |
0 - 20 Hz |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
Lighting Bar with 7x Red LASERs of 200 mW each one & 6x 3W LEDs each, warm white (3200K), and control of the tilt axis. Works in Auto, Mater/Slave or DMX mode with 6,7,16,18 or 21 Channels. Featuring OnBoard LCD Screen for addressing and settings. Power Supply 90-240AC 50/60Hz with Powercon In/out. Power Consumption 300W. Weight 5.5Kgs Dimensions: 100 x 13,5 x 7 cm. Uses: Clubs, Theaters, Live Events,
Catalog |
Lights |
Category |
LASERS |
Color |
Black/Μαύρο |
Color Mixtype |
RED |
DMX Channels |
21 |
IP Rating |
20 |
Lighting Type |
BAR/STRIP LIGHT |
Manufacturer |
MARK |
Measurement Unit |
PIECE |
Modulation Type |
TTL |
Operating Mode |
DMX |
Order Quantity |
1 |
Power (mWatt) |
1400 |
Power supply (V) |
110V-230V |
Scanner Angle (Degrees) |
7 |
Use |
LASER BARS |
Warranty Months |
12 |
|
Reviews
There are no reviews yet.