Description | |
LED light effect bar with RGB color mixing, incl. IR remote control
- 6 high-power 30 W RGB LEDs (COB)
- Built-in auto and music show programs
- Direct color selection for 18 preset colors
- Stepless RGB color blend, color change, color fade, dimmer and strobe effect
- Addressing and setting via control panel with 4-digit LED display
- Convenient wireless control via included IR remote control EUROLITE IR-7
- Supports QuickDMX - the wireless DMX system from Eurolite
- Built-in phantom-powered USB port for QuickDMX, CRMX and WDMX receivers (optional)
- Swivel mounting bracket
- P-Con terminals for power linking up to 8 units
- LED: 6 x COB (chip-on-board) 30 W 3in1 TCL RGB (homogenous color mix)
- Can be operated in 2; 3; 5; 9; 18; 21 CH mode
- The device is cooled by super silent fan
- Controlling by IR remote control; Sound to light via Microphone; Master/slave function; DMX; Stand-alone
- Preprogrammed in Light?J; LED PC-Control 512; EASY SHOW; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE
- Flicker-free projection
| LED bar (60 cm) with 6 x 4 W 4in1 LED (RGBW)
- Mains input and output for power linking up to 8 units
- 6 powerful LEDs 4 W high-power 4in1 QCL RGBW (homogenous color mix)
- Color change adjustable; Dimmer electronic; color blend stepless
- Strobe effect
- Can be operated in 2; 4; 5; 6; 9 CH mode
- The device is cooled by passive convection cooling
- Controlling by stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional)
- Preprogrammed in LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain; EASY SHOW 2; EASY SHOW 3
- Flicker-free
- With a beam angle of 17°
- With Mounting bracket
- 4 digits 7-segment LED display
- Silent operation
Package contents
- 1 x light effect, 2 x mounting bracket, 1 x power cord, 2 x screw, 2 x washer, 1 x user manual
| Bar with 4 RGBW spots and 4 white strobe LEDs, with QuickDMX connector (XLR)
- Crossbar with integrated DMX control unit and stand sleeve
- Ultra-light, ideally suited for mobile use
- Suited for installation on a speaker stand (not included) or truss
- Mains input and output for power linking up to 8 units
- Can be operated in 3; 4; 8; 21 CH mode
- The device is cooled by passive convection cooling
- Controlling by stand-alone; DMX; IR remote control; Sound to light via Microphone; Master/slave function; QuickDMX via 5-pin XLR (M) mounting version (optional)
- Preprogrammed in EASY SHOW 1; LED PC-Control 512; Light Captain; EASY SHOW 2; EASY SHOW 3; Light´J
- Flicker-free
- With a beam angle of 9°
- Monochrome 4 digits 7-segment LED display
- For application areas such as: Band/rehearsal room; mobile djs/entertainer; Stage
- Color blend stepless; color change adjustable; colors preset; Dimmer electronic
- Strobe effect
- With Mounting bracket
- Silent operation
spotlight
- 4 powerful LEDs 8 W high-power 4in1 QCL RGBW (homogenous color mix)
4 spots separate controlling
bar
- 4 powerful LEDs 1 W high-power cold white (CW)
LEDs separate controlling
| |
- Extraordinary lighting for an enchanting atmosphere
- The milky PVC housing provides for a lovely appearance as well as for atmospheric illumination
- Incl. 3 easy-to-connect parts as stand for upright mounting and clips for wall or ceiling mounting
- 32 powerful LEDs SMD 5050 3in1 TCL RGB
- Program speed adjustable; Dimmer electronic
- Strobe effect
- 10 integrated show programs
- Direct color selection for 12 preset colors
- Control via IR remote control
- With a beam angle of 300°
- For application areas such as: Party room
|
Content |
- 12 x 10 watt Tri-LEDs 3-in-1 Cool White, Warm White and Amber
- Full white temperature control from Tungsten to CW (1,600 - 6,800 K)
- CRI 97 @ 2,800 K for natural colour rendering
- Dim to Warm (DTW) technology to emulate halogen-style dimming
- Single pixel control for stunning chase and pixel mapping effects
- Selectable 16-bit dimming curves and response
- RDM enabled
- 9 DMX modes plus sound activation and automated operation
- Highly efficient convection cooling for noiseless operation
- Flicker free for use in TV and film applications
- Glare shield and frost filter included
- Omega bracket set available as accessory
Featuring twelve 10 watt 3-in-1 cool white, warm white and amber Tri-LEDs, the Cameo PIXBAR DTW PRO permits full white temperature control from warm Tungsten white to ultra bright cool white. The professional LED bar features an 18° beam angle and Dim-to-Warm technology to emulate the smooth dimming of halogen lamps. Highly efficient convection cooling and a 3,000 Hz refresh rate ensure absolutely noiseless and flicker-free operation making it a perfect choice for TV and film applications.
The PIXBAR DTW PRO is RDM enabled and provides 9 modes of DMX control, sound activation plus automated operation. The fixture includes single pixel control for impressive chase effects and pixel mapping, a high-speed strobe and selectable 16-bit dimming curves with adjustable response. A 4-button display enables easy configuration. The rugged aluminium housing features 3 and 5-pin DMX and Neutrik powerCON inputs and outputs that enable convenient daisy chaining. The PIXBAR DTW PRO comes with a glare shield and frost filter if softer washes are called for.
Product type
LED Bars
Type
Washer
Colour spectrum
cold white , warm white , yellow
Number of LEDs
12
LED type
10 W (ca. 50000 operating hours)
Refresh rate
3000 Hz
Dispersion
18° Beam, 30° Beam Field (without Diffusor) °
Lens
PE
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
1-channel , 13-channel , 2-channel , 3-channel , 36-channel , 49-Channel , 6-channel , 9-channel
DMX Functions
Auto Mode , Automode-Speed , Color Temperature , Dim LEDs seperate , Dim to Warm , Dimmer , Sound to Light , strobe
Standalone modes
Master / Slave mode , Static
Controls
Enter , Mode , Value Down , Value Up
Indicators
LC display
Operating voltage
Glare Shield , Neutrik Power Cable
Power consumption
130 W
Power connector
Neutrik powerCON IN / OUT
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
20
Cooling
Convection Cooling
Luminous flux
3240 lm
Efficiency
25 lm/W
Operating Temperature
-15 - 45 °C
Dimensions including Mounting Bracket
Width
93 mm
Height
130 mm
Length
900 mm
Weight
7,8 kg
Accessories (included)
FROST Filter , Glare Shield , Neutrik Power Cable
| LED light effect bar with RGB color mixing, incl. IR remote control
- 6 high-power 30 W RGB LEDs (COB)
- Built-in auto and music show programs
- Direct color selection for 18 preset colors
- Stepless RGB color blend, color change, color fade, dimmer and strobe effect
- Addressing and setting via control panel with 4-digit LED display
- Convenient wireless control via included IR remote control EUROLITE IR-7
- Supports QuickDMX - the wireless DMX system from Eurolite
- Built-in phantom-powered USB port for QuickDMX, CRMX and WDMX receivers (optional)
- Swivel mounting bracket
- P-Con terminals for power linking up to 8 units
- LED: 6 x COB (chip-on-board) 30 W 3in1 TCL RGB (homogenous color mix)
- Can be operated in 2; 3; 5; 9; 18; 21 CH mode
- The device is cooled by super silent fan
- Controlling by IR remote control; Sound to light via Microphone; Master/slave function; DMX; Stand-alone
- Preprogrammed in Light?J; LED PC-Control 512; EASY SHOW; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE
- Flicker-free projection |
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
15 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Power output: |
1 x IEC connector (F) mounting version |
Lamp type: |
LED lamp |
LED: |
6 x 4 W high-power 4in1 QCL RGBW (homogenous color mix) |
Flash rate: |
0 - 20 Hz |
DMX channels: |
2; 4; 5; 6; 9 |
DMX input: |
1 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional); LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain; EASY SHOW 2; EASY SHOW 3 |
Beam angle: |
17° |
Beam angle (1/2 peak): |
17° |
Beam angle (1/10 peak): |
33° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
4 digits 7-segment LED display |
Material: |
Aluminum casting; metal; plastic |
Dimensions: |
Length: 58,5 cm
Depth: 6,5 cm
Height: 10 cm |
Weight: |
1,66 kg |
Noise classification: |
Class 0 (no noise at all) |
Power cord |
Cable construction: |
3 x 0,75 mm² H05VV-F |
Cable length: |
Approx. 1,1 m |
Mounting bracket |
Pieces: |
2 Stk |
Diameter mounting holes: |
1 x Ø20mm; 1 x Ø11mm; 1 x Ø8mm; 2 x Ø7mm |
Material: |
Metal, 2 mm |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
80 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Cable length: |
Approx. 1,1 m |
Power output: |
1 x IEC connector (F) mounting version |
Lamp type: |
LED lamp |
DMX channels: |
3; 4; 8; 21 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; DMX; IR remote control; Sound to light via Microphone; Master/slave function; QuickDMX via 5-pin XLR (M) mounting version (optional); EASY SHOW 1; LED PC-Control 512; Light Captain; EASY SHOW 2; EASY SHOW 3; Light´J |
Beam angle: |
9° |
Beam angle (1/2 peak): |
9° |
Beam angle (1/10 peak): |
18° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
Monochrome 4 digits 7-segment LED display |
Dimensions: |
Width: 60,5 cm
Depth: 14 cm
Height: 23 cm |
Weight: |
4,85 kg |
Noise classification: |
Class 0 (no noise at all) |
Spotlight |
LED: |
4 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
Bar |
LED: |
4 x 1 W high-power cold white (CW) |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
- 12 ultra-bright 12 W RGBWA+UV LEDs
- IP65 classification for outdoor use
- Absolutely noiseless and flicker-free operation
- 7 DMX modes plus operation as a standalone, master or slave
- RDM enabled
- Bold primary colours, pastel and UV tones
- Colour macros that are adjusted for LEE filters
- Single Pixel Control for effective Chase effects
- Colour temperature correction
- 4 dimmer curves
- Neutrik powerCON TRUE1 and 5-pin X-HD power and DMX sockets
- Access lock against unauthorised changes to the menu settings
- Rugged housing made of die-cast aluminium
- Two diffusion filters and one lens hood included
Featuring 12 ultra bright 12 watt 6-in-1 LEDs and 22° beam width the Cameo PixBar 600 PRO IP65 creates impressive RGBWA+UV washes. Highly efficient convection cooling ensures noiseless performance, and with a 3,600 Hz refresh rate the IP65 rated outdoor fixture is flicker-free and suitable for TV and motion picture applications. The wash light comes with 2 diffusors to change beam and field angles from 22° and 72° to 52° and 92° while providing smooth lighting with minimum dazzle.
The PixBar 600 PRO IP65 is RDM enabled allowing bi-directional communication with a dedicated controller for addressing, configuration and status reporting. It provides 7 modes of DMX control and sports 14 automated lightshows, 4 selectable dimming curves, a strobe function and standalone, master or slave capability. The fixture includes single pixel control, color temperature correction and macros calibrated to the LEE filters standard for additional effects and flexibility.
The rugged aluminium enclosure features a backlit 4-button display with security lock to prevent unauthorized menu access, Neutrik X-HD series 5-pin DMX inputs and outputs and powerCON TRUE1 mains connectors.
Product type
LED Bars
Type
Outdoor
Colour spectrum
RGBWA+UV
Number of LEDs
12
LED type
12 W 6in1 colour
Dispersion
(Beam) 22° / (Field) 72 ° , (Beam) 52° / (Field) 92 °
Refresh rate
3600 Hz
DMX input
5-pin Neutrik X-HD
DMX output
5-pin Neutrik X-HD
DMX mode
12-channel , 2-channel , 6-channel 1 , 6-channel 2 , 74-channel , 78-channel , 8-channel
DMX Functions
14 auto modes , colour fade , colour jump , colour macro , Colour temperature correction , Dimmer , Single Pixel Control , strobe
Standalone modes
14 auto modes , static colour , strobe
Controls
Enter , mode , Value Down , Value Up
Indicators
backlit LCD
Operating voltage
110 V AC - 240 V AC / 50 – 60 Hz
Power consumption
160 W
Power connector
Neutrik powerCON TRUE1 IN (NAC3FX-W) / OUT (NACMFX-W)
Housing material
die-cast aluminium
Cooling
Convection
Cabinet colour
Black
Illuminance
1250lx @ 1m
Protection class IP
65
Operating Temperature
-15 - 45 °C
Dimensions without mounting bracket
Width
854 mm
Height
130 mm
Depth
90 mm
Weight
6,2 kg
|
Power supply: |
12 V DC |
Power consumption: |
12 W |
IP classification: |
IP20 |
Protection class: |
Protection class III |
Power connection: |
Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided) |
LED: |
32 x SMD 5050 3in1 TCL RGB |
Flash rate: |
0 - 30 Hz |
Control: |
IR remote control |
Beam angle: |
300° |
Beam angle (1/2 peak): |
300° multicolor |
Housing color: |
White; semi-transparent |
Dimensions: |
Width: 20 cm
Height: 1 m
Diameter: Ø 5 cm |
Weight: |
370 g |
|
Reviews
There are no reviews yet.