Cameo SB8.3 – 8-channel DMX splitter / booster (3-pin)

198.40 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: 4049521175855
Installments calculation
CompareAdd to wishlist Submit Better Price
The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19″ format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are […]

 

Read more

The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19″ format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.

The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).

  • Type: DMX 512 protocol
  • DMX Inputs: 2 (parallel)
  • DMX Input Connectors: 3-pin XLR male
  • DMX Thru Outputs: 2 (parallel)
  • DMX Thru Output Connectors: 3-pin XLR female
  • DMX Outputs: 8 (electrically isolated)
  • DMX Output Connectors: 3-pin XLR female
  • Controls: Power On/Off, DMX Thru Terminator
  • Indicators: 8 x Power LED, 8 x Signal LED
  • Power Socket: IEC power socket
  • Power Supply: transformer
  • Operating Voltage: 230 V AC, 50 Hz
  • Power Consumption (max.): 15 W
  • Dimensions (W x H x D): 483 x 44 x 160 mm
  • Accessories included in package: power cord
Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “Cameo SB8.3 – 8-channel DMX splitter / booster (3-pin)”

Your email address will not be published. Required fields are marked *

Quick Comparison

Cameo SB8.3 - 8-channel DMX splitter / booster (3-pin) removeEurolite USB-DMX512 PRO Interface MK2 removeEUROLITE USB-DMX512 PRO Dmx Interface removeCAMEO iDMX CORE WiFi To W-DMX Converter removeBotex DD-6 RDM Rigg 3P RDM-Capable 1-in-6 DMX Splitter removeEUROLITE DMX 6 Splitter remove
NameCameo SB8.3 - 8-channel DMX splitter / booster (3-pin) removeEurolite USB-DMX512 PRO Interface MK2 removeEUROLITE USB-DMX512 PRO Dmx Interface removeCAMEO iDMX CORE WiFi To W-DMX Converter removeBotex DD-6 RDM Rigg 3P RDM-Capable 1-in-6 DMX Splitter removeEUROLITE DMX 6 Splitter remove
ImageBotex DD-6 RDM Rigg 3P
SKUCLSB83USB-DMX512 PROMK2USB-DMX512 PROCLIDMXCOREDD6RDMDMX 6 SPLITTER
Rating
Price 198.40 incl. GR VAT152.00 incl. GR VAT 141.00 incl. GR VAT 471.16 incl. GR VAT 200.00 incl. GR VAT 217.62 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOnly 2 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis. The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
  • Type: DMX 512 protocol
  • DMX Inputs: 2 (parallel)
  • DMX Input Connectors: 3-pin XLR male
  • DMX Thru Outputs: 2 (parallel)
  • DMX Thru Output Connectors: 3-pin XLR female
  • DMX Outputs: 8 (electrically isolated)
  • DMX Output Connectors: 3-pin XLR female
  • Controls: Power On/Off, DMX Thru Terminator
  • Indicators: 8 x Power LED, 8 x Signal LED
  • Power Socket: IEC power socket
  • Power Supply: transformer
  • Operating Voltage: 230 V AC, 50 Hz
  • Power Consumption (max.): 15 W
  • Dimensions (W x H x D): 483 x 44 x 160 mm
  • Accessories included in package: power cord
  • Suitable for a variety of DMX software applications
  • Fully supported by FreeStyler, DMXControl and PC_DIMMER
  • Output of up to 512 DMX channels
  • Stable DMX output thanks to integrated processor
  • Compatible with Windows 7, 8 and 10, Mac OS X and Linux
  • Connections: 3-Pin XLR connector (Neutrik), USB 2.0/ 1.1 B
  • DMX output galvanically isolated against voltage damage
  • Sturdy metal housing
  • Power supply via USB
  • Power supply: 5 V DC via USB
  • Dimensions (L x W x H): 80 x 42 x 50 mm
  • Weight: 350 g
  • Incl. USB cable A/ B
  • Made in Germany

The Eurolite USB-DMX 512 interface combines very small dimensions with many functions due to the internal RISC-controller. This controller creates all DMX-signals so that the pc and the USB-port is not too busy enabling the parallel use of several DMX-universes.

Eurolite USB-DMX 512 Interface features:

  • USB-DMX-Interface
  • Interface between notebook or pc and DMX-devices
  • Tested with the following DMX lighting control software: DMX-Configurator, FreeStyler, DMXControl
  • Recommended system requirements: min. Pentium 3 processor 1GHz, 128 MB RAM
  • Tested operating systems: Windows XP Home, Windows XP Professional, Windows Vista, Windows7
  • Power supply: 5 V DC, 500 mA via USB
  • Input: USB 1.1 / USB 2.0
  • DMX-output: 512 channels
  • DMX-512-connection: 3-pin XLR
  • Battery-powered WiFi to W-DMX™ converter
  • Allows wireless lighting control via the Cameo iDMX® Controller App
  • Receives WiFi signals from all iOS and Android devices
  • 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m
  • Can be used purely as a W-DMX™ transmitter via the DMX input
  • Allows control of conventional DMX devices using the iDMX® Controller App via the DMX output
  • Long-life LG Chem lithium-ion battery for reliable operation
  • Battery management system prevents overcharging and deep discharging
  • Includes power adapter charger, bag and DMX cable
Wireless lighting control at your fingertips using iOS and Android devices with the iDMX® CORE WiFi and W-DMX™ Box. The battery-powered unit is specially designed to work with Cameo\'s iDMX® Controller App. It features a 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m. 3 and 5-pin DMX inputs and outputs allow use with DMX light desks as well as wireless control of conventional DMX spots via W-DMX™ (the Wi-Fi connection is only between the mobile device and iDMX CORE). The high-capacity LG Chem lithium-ion battery provides up to eight hours of continuous operation for the iDMX® CORE Box, which can be extended by means of external power banks. An integrated battery management system prevents overcharging and deep discharging to ensure long battery life. A power adapter charger, DMX Y cable and bag are included. Product type LED PAR Lighting Accessories
Range of W-DMX™ up to 300 m
Range of WiFi up to 15 m
Radio frequency 2400 MHz
DMX input 3-pin & 5-pin
Controls On / Off , reset
Indicators Status LED
Battery capacity 24 Wh
Charging time 6h
Battery operation time at maximum load up to 8 hours
Housing material Aluminium
Cabinet colour Black
Protection class IP 20
Cooling Convection
Maximum Ambient Temperature -10° - 45° °C
Dimensions without mounting bracket
Width 85 mm
Height 25 mm
Length 170.5 mm
Weight 0,939 kg
  • For distribution of RDM and DMX signals on stage
  • Within a rig or for fixed installations
  • Robust metal housing with mounting rail with M10 thread on the top side
  • Compact and lightweight design ideal for mounting on trusses
  • DMX input and Thru: XLR 3-pin
  • 6 DMX outputs: XLR 3-pin
  • Power input: Power Twist
  • Power supply: 100 - 240 V ~ 50 / 60 Hz
  • Power consumption: 5 watts
  • Dimensions: 122 x 126 x 254 mm
  • Weight: 1.6 kg
Eurolite DMX Split 6X - 6-way DMX splitter for rackmounting, DMX distributor with one input and six outputs,  absolute electric isolation between input and output or between output and output, two types of DMX connectors (3-pin & 5-pin) for each individual channel, every DMX output features an independent driver and data indicator, input and output with a set of respective power supply and 500 mA internal fuse. Power supply: 230V AC~50Hz. Power consumption: 35W. DMX 512-output: 3-pin or 5-pin XLR-connector. Dimensions: 483 x 200 x 50mm (LxWxH). Weight: 3.5kg
Weight3.00 kg0.50 kg1.00 kg1.00 kg1.7 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 0.50 kg
Weight 1.00 kg
Weight 1.00 kg
Weight 1.7 kg
Weight 3.50 kg