| Content | The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 8 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 8 x Power LED, 8 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
| Standalone DMX Controller
- No computer required
- Compatible with any DMX device
- Up to 4 DMX universes (2048 channels, add-on required for U3+4)
- Up to 680 fixtures and beams
- Up to 50 fixture types
- Up to 5000 fixture properties (colour/gobo etc...)
- 8 Fixture groups
- 6 Projects
- 15000+ available fixtures (3500+ on the controller)
- DMX address
- Fixture order and group settings
- Use as DMX splitter with DMX universe mapping
- Colour FX module with 8 effect types and 16 definable colours
- Move FX module with 8 effect types
- Beam FX module with 8 effect types
- 6 Flash buttons for controlling Special FX, Strobe, Blinder, Speed, Blackout and Smoke
- Static colour palette with 10 user-defined colours per group and gradient control
- Static position palette with 5 user-defined positions per group with fade and fanning
- Gobo palette with 5 user-definable gobos per group
- 20 Nameable live edit buttons with flash trigger mode and 'park' function
- 100 Nameable presets for storing snapshots with hold and fade timings
- Preset playback cue list - all presets or per page of 20 presets
- Group and master dimming with encoder acceleration
- Group FLASH
- FULL and Blackout
- 16-Bit pan/tilt control:multi-beam LED bar control
- FX music pulse synchronisation from microphone or line-in
- FX BPM sync with Ableton Link
- OS2L or BPM Tap effect speed
- Phase, sequence, size, fade, fan and flick
- Live control of Move FX registration point
- Global FX speed and freeze control
- Map DMX IN with group dimmer and patch to output channels (add-on required)
- WLINK sync with another Wolfmix controller (add-on required)
- Fixture Builder
- Fixture calibration tool to limit the range of moving fixtures
- X-Y touch controlled positioning grid
- RGBW touch controlled colour picker
- 8-Step real-time sequencer to create beam and move FX
- Live view of DMX levels with override of default values and DMX channel tester
- Beam editor for overriding min and max values for created effects
- Calibration and RGB, white, amber, UV mixing with automatic translation of fixed colour wheel
- Automatic matching of similar gobos across different fixture types
- Time-controlled triggering of flash and preset buttons
- Fixture FLIP function for beam order reversal
- Fixture SPLIT function for splitting multi-FX bars
- Project and fixture backup with the WTOOLS app
- Offline 3D visualisation with Easy View & WTOOLS via USB (add-on required)
- Automatic restoration of the active project (no manual saving necessary)
- Import different fixture setups into the same project
Technical data:
- Housing: ABS plastic
- Powder-coated steel base plate with 100mm VESA
- Powder-coated, steel-reinforced back plate
- Screen: 4.3" colour TFT with tinted glass
- Capacitive touch
- Hardware: 220 Mhz CPU with ARM core, 8 MB RAM, 16 MB Flash
- Audio: Omnidirectional electret microphone
- 3.5 mm Jack line-in
- DMX: 2 x 3pin DMX OUT XLR connectors
- 1 x 5pin DMX OUT XLR connector
- 1 x 5pin DMX IN/OUT XLR connector with WLINK
- USB-B connector - 900ma required (USB3 rating)
- Dimensions (W x D x H): 195 x 220 x 62 mm
- Weight: 1070 g
|
LED PC-Control 512 DMX-software with interface Features: > 1 DMX universe > Automatic program generator with X-Pan, Y-Tilt and RGB effects > Graphic patch Eeditor for DMX fixture addressing > Quick fixture profile editor with 3000 files (libraries) included > Advanced Matrix editor to allow all LED configurations > Several menu languages (French, English, German, Chinese) > Full RGB (W/A) color + dimmer management and rendering > Graphic 2D edition of the fixtures > Up to 5120 channels with several plugged interfaces > Fade-in time between programs and scenes > Graphic and user friendly live board that can be operated by touch screen > Colors, dimmer, speed, black out and pause can be managed in live mode > Multiple program triggers > USB 2.0 to 512 DMX channels (2 x 512 channel version is available PC-Control 1024) > Pilot LED to indicate the current DMX signal state > High voltage proof > DMX output speed signal can be configured for perfect DMX line stability and full compatibility with any electronic fixtures (Mab, Break, Delay, frequency 1 to 45 Hz) > Strong aluminum housing that can be wall mounted > Operating system: Mac Os X, Windows 32 or 64 bit (2000, XP, Vista, 7) > CPU: 1 Ghz , RAM memory: 512 Mb, Hard disk space: 150 MB (51860150) |
-
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
|
- For distribution of RDM and DMX signals on stage
- Within a rig or for fixed installations
- Robust metal housing with mounting rail with M10 thread on the top side
- Compact and lightweight design ideal for mounting on trusses
- DMX input and Thru: XLR 3-pin
- 6 DMX outputs: XLR 3-pin
- Power input: Power Twist
- Power supply: 100 - 240 V ~ 50 / 60 Hz
- Power consumption: 5 watts
- Dimensions: 122 x 126 x 254 mm
- Weight: 1.6 kg
|
- Suitable for a variety of DMX software applications
- Fully supported by FreeStyler, DMXControl and PC_DIMMER
- Output of up to 512 DMX channels
- Stable DMX output thanks to integrated processor
- Compatible with Windows 7, 8 and 10, Mac OS X and Linux
- Connections: 3-Pin XLR connector (Neutrik), USB 2.0/ 1.1 B
- DMX output galvanically isolated against voltage damage
- Sturdy metal housing
- Power supply via USB
- Power supply: 5 V DC via USB
- Dimensions (L x W x H): 80 x 42 x 50 mm
- Weight: 350 g
- Incl. USB cable A/ B
- Made in Germany
|
Reviews
There are no reviews yet.