Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB

109.12 incl. GR VAT

Available on backorder

EAN: 4049521189630
Installments calculation
CompareAdd to wishlist Submit Better Price
User’s manual DMX Control Table Eco label Photometric measurements Daslight V3 fixtures Fixtures Library grandMA Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB Strobe, Blinder and Wash Light all in one 132 RGB SMD LEDs 1 to 30 flashes/sec adjustable DMX, Sound- and manual control […]

 

Read more

pdfUser’s manual
pdfDMX Control Table
pdfEco label
pdfPhotometric measurements
libraryDaslight V3 fixtures
libraryFixtures Library grandMA

Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB

  • Strobe, Blinder and Wash Light all in one
  • 132 RGB SMD LEDs
  • 1 to 30 flashes/sec adjustable
  • DMX, Sound- and manual control
  • Master, Slave and Standalone operation
  • Rugged metal housing with universal mounting bracket
  • Low power consumption

The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.

The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.

Product type
LED Strobes

Type
Strobe / Blinder / Washer

Colour spectrum
RGB

Number of LEDs
132

LED type
0.2 W

Dispersion
80 °

Refresh rate
1 – 30 Hz

DMX input
XLR 3-pin male

DMX output
XLR 3-pin female

DMX mode
1-channel , 2-channel 1 , 2-channel 2 , 3-channel 1 , 3-channel 2 , 3-channel 3 , 4-channel , 6-channel

DMX Functions
Dimmer , Flash duration , Flash rate

Standalone modes
Dimmer Mode , Flash duration , slave mode , sound control

Controls
mode , Value Down , Value Up

Indicators
LED Display

Operating voltage
100 V AC – 240 V AC, 50 – 60 Hz

Power consumption
30 W

Power connector
IEC power connector male

Housing material
metal

Cabinet colour
Black

Dimensions without mounting bracket


Width
310 mm

Height
70 mm

Depth
70 mm

Weight
1,4 kg
Weight 1.40 kg

Reviews

There are no reviews yet.

Be the first to review “Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB”

Your email address will not be published. Required fields are marked *

Quick Comparison

Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB removeEUROLITE DISCO STROBE 50 Simple Compact STROBO 25W removeGriven AD-3436 Dolomite CYM 600 575W removeCameo CLMP10WRGB MATRIX PANEL 25 x 10w LED Matrix Panel with single pixel control RGB removeCameo FLAT PRO FLOOD IP65 TRI Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing removeEUROLITE BLINDER 8xPAR36 BL -NEW- remove
NameCameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB removeEUROLITE DISCO STROBE 50 Simple Compact STROBO 25W removeGriven AD-3436 Dolomite CYM 600 575W removeCameo CLMP10WRGB MATRIX PANEL 25 x 10w LED Matrix Panel with single pixel control RGB removeCameo FLAT PRO FLOOD IP65 TRI Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing removeEUROLITE BLINDER 8xPAR36 BL -NEW- remove
Image52200611 disco strobe eurolite 50w
SKUCLTW100RGBDISCO STROBE 50DOLOMITECYM6CLMP10WRGBCLFLOODIP65TRIBLINDER 8xPAR36 BL
Rating
Price 109.12 incl. GR VAT 24.17 incl. GR VAT 2,480.36 incl. GR VAT 648.55 incl. GR VAT 372.00 incl. GR VAT 173.59 incl. GR VAT
Stock

Available on backorder

Only 3 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderOnly 3 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentpdfUser's manual pdfDMX Control Table pdfEco label pdfPhotometric measurements libraryDaslight V3 fixtures libraryFixtures Library grandMA

Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB

  • Strobe, Blinder and Wash Light all in one
  • 132 RGB SMD LEDs
  • 1 to 30 flashes/sec adjustable
  • DMX, Sound- and manual control
  • Master, Slave and Standalone operation
  • Rugged metal housing with universal mounting bracket
  • Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket. The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Product type
LED Strobes

Type
Strobe / Blinder / Washer

Colour spectrum
RGB

Number of LEDs
132

LED type
0.2 W

Dispersion
80 °

Refresh rate
1 - 30 Hz

DMX input
XLR 3-pin male

DMX output
XLR 3-pin female

DMX mode
1-channel , 2-channel 1 , 2-channel 2 , 3-channel 1 , 3-channel 2 , 3-channel 3 , 4-channel , 6-channel

DMX Functions
Dimmer , Flash duration , Flash rate

Standalone modes
Dimmer Mode , Flash duration , slave mode , sound control

Controls
mode , Value Down , Value Up

Indicators
LED Display

Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz

Power consumption
30 W

Power connector
IEC power connector male

Housing material
metal

Cabinet colour
Black

Dimensions without mounting bracket


Width
310 mm

Height
70 mm

Depth
70 mm

Weight
1,4 kg
This basic strobe effect is perfectly suited for your private party room. Thanks to the mounting bracket, it can easily be mounted to a wall or ceiling. The flash frequency can be adjusted from 1-10 flashes per second using the rotary control.

Simple, compact strobe 52200611

  • Small strobe effect with high output
  • High-quality strobe flash tube
  • Flash rate adjustable
  • Lightweight plastic housing
  • Control via stand-alone
  • Strobe effect
  • With a beam angle of 60°
  • Very high color rendering index (CRI)
  • With Mounting bracket
  • For application areas such as: Party room; Decoration

Package contents

  • 1 x device, 1 x mounting bracket, 1 x user manual
Power supply: 230 V AC, 50 Hz
Power consumption: 25 W
IP classification: IP20
Protection class: Protection class II
Power connection: Fixed power supply cord with Euro plug
Cable length: Approx. 0,9 m
Lamp type: Gas discharge lamp
Color of light: Cold white CW >5000 K
Flash rate: 1 - 10 Hz
Control: Stand-alone
Beam angle: 60°
Beam angle (1/2 peak): 60°
Color rendering index (CRI): 97 Ra
Construction: Tube
Wavelength: 460 nm
Attachment system: Mounting bracket
Dimensions: Length: 13,7 cm Width: 9,5 cm Height: 8,8 cm
Weight: 200 g
Mounting bracket
Diameter mounting holes: 1 x Ø5mm
Material: Plastic, 3 mm

Griven AD-3436 Dolomite CYM 600 575W

STELVIO CYM 300, another newcomer to the architectural range, uses a new lamp, the MSD 250, which due to its short arc produces even more light output than from the HQI-TS used in the Vesuvio OS CYM 250. This projector is equipped with an optical system that produces a long throw beam of 33?°. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system. Remote lamp ON/OFF control and dimmer/strobe/black out functions now available.
A version of the Stelvio - STELVIO CYM 300 HFT- is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven???s wireless DMX transmitter. See dedicated section for more information.

LAMP
250W, 18.000 lm, 6.700?° K
Discharge lamp MSD 250
Average rated life 3.000 hours
GY 9,5 base.
Ordering code LP0205
Available on request: MSA 300 lamp (250W), 4000/6000 hours, 16.000 lm, 6000?° K

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 33?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230V, 50Hz, 1,7 Amp

 

User´s Manual
DMX Control Table
Technical drawing
Daslight V3 fixtures
Tender documents

Cameo MATRIX PANEL 10 W RGB
5 x 5 RGB LED Matrix Panel with Single Pixel Control  
  • 5 x 5 Matrix Panel with single pixel control
  • 25 x 10 W RGB LEDs
  • 5 DMX modes, sound activation and built-in auto run programs
  • Master, slave and standalone capability
  • Blinder, chase and strobe effects
  • Alphabetic character and numeral mapping
  • 4 selectable dimming curves
  • Flicker-free operation
  • Ultra flat housing with low-noise fan
  • Even more impressive in multiples

With a 5 x 5 array of 10 watt RGB LEDs, 40° beam spread and flicker-free performance the Cameo Matrix Panel creates exciting blinder, chase and strobe effects. Featuring powerful single pixel control, it is the perfect choice for mapping alphabetic characters, numerals and complete messages. Recessed latches on all sides enable joining multiple panels for large, impressive backdrops.

The Matrix Panel 10 RGB includes five modes of DMX control, sound activation, built-in auto run programs and 4 selectable dimming curves. It sports master, slave and standalone capability, a bright 4-button display plus a low-noise fan for cool and quiet operation. The ultra flat all-metal housing provides 3 and 5-pin DMX inputs and outputs and Power Twist connectors for easy daisy-chaining. The Matrix Panel comes with a safety eye, swivel bracket and two omega brackets and runs on all voltages from 100 - 240 volts AC.

Product type LED MATRIX PANEL
Type 5 X 5 Matrix
Colour spectrum RGB
Number of LEDs 25
LED type 10 W RGB
Dispersion 40 °
Refresh rate 8000 Hz
DMX input XLR 3-pin male
DMX output XLR 3-pin female
DMX mode 19-channel , 28-channel , 3-channel , 5-channel , 78-channel
DMX Functions Auto programs , Dimmer Fine , master dimmer , sound programs , Stroboscope
Standalone modes Master / Slave mode , Music control
Controls Down , Enter , Mode , Up
Indicators 4-digit LED display
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Power consumption 180 W
Power connector Blue and white power I/O
Housing material metal
Cabinet colour Black
Cooling fan
Fuse F3AL / 250 V
Illuminance 6950lx @ 1m
Width 580 mm
Height 580 mm
Depth 125 mm
Weight 13,7 kg
Accessories (included) swivel bracket , 2x Omega Mounting Bracket , LED MATRIX PANEL , safety eyelet

User\'s manual
DMX Control Table
Eco label
Photometric measurements
Daslight V3 fixtures
Fixture Library grandMA2

Cameo FLAT PRO FLOOD IP65 TRI
Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing
  • 1 x 60W Tri Color COB LED
  • IP65 rated for outdoor applications
  • Flicker free
  • 120 degrees dispersion for perfect wall-washing effects
  • DMX control plus master, slave and standalone modes
  • Easy to operate via mode, enter, up and down keys with backlit display
  • Menu lock to prevent unauthorized access
  • Compact heavy-duty metal enclosure
  • Universal mounting bracket
  • DMX and mains input and output on screw connectors
  • Barn doors available as accessory

The Cameo FLAT PRO series FLOOD IP65 TRI is a compact outdoor LED flood light with IP65 rating, 120° beam angle and convection cooling. A 60 watt tri-color COB LED generates rich, saturated RGB colors with a 3,000 Hz refresh rate providing flicker free performance. The black heavy-duty metal enclosure features screw connectors for DMX and mains input and output plus a backlit display with mode, enter, up and down keys for easy operation. The Cameo FLOOD IP65 TRI allows for 2-channel, 3-channel 1, 3-channel 2 and 6-channel DMX control as well as master, slave and standalone modes while a setting lock prevents unauthorized menu access. The universal bracket adds a wide variety of mounting options. Barn doors are available as accessory.

Product type LED PAR Lighting
Type Outdoor
Colour spectrum RGB
Number of LEDs 1
LED type 60 W COB TRI LED
Refresh rate 3000 Hz
Dispersion 120 °
DMX input 3-pin special connector, screwable
DMX output 3-pin special connector, screwable
DMX mode 2-channel , 3-channel 1 , 3-channel 2 , 6-channel
DMX Functions colour fade , colour jump , colour macro , master dimmer , RGB , strobe
Standalone modes Auto run , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls Enter , mode , Value Down , Value Up
Indicators backlit LCD
Operating voltage 110 V AC - 240 V AC / 50 – 60 Hz
Power consumption 75 W
Power connector 3-pin special connector, screwable
Housing material metal
Cabinet colour Black
Protection class IP 65
Cooling Convection
Illuminance 830lx @ 1m
Dimensions without mounting bracket
Width 180 mm
Height 180 mm
Length 120 mm
Weight 3,2 kg
Audience Blinder,8xPAR-36,black High-quality stage version * For 8 PAR 36-lamps * Each lamp is individually connected to an internal lustre terminal, so that any lamps of your choice can easily be wired * Extreme and lightning-fast light displays * With horizontally adjustable lamp rows for even more possibilities SPECIFICATIONS: Power supply: 230 V AC, 50 Hz ~ Power consumption: 5200 W Dimensions (LxWxH): 770 x 400 x 100 mm Weight: 7 kg On-period: 3 minutes Cooling time: 3 minutes
Weight1.40 kg2.00 kg18.00 kg14.00 kg3.20 kg7.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.40 kg
Weight 2.00 kg
Weight 18.00 kg
Weight 14.00 kg
Weight 3.20 kg
Weight 7.00 kg