CELESTION CDX1-1070 ORIGINAL DRIVER FOR YAMAHA STAGEPAS T5866A YE271A00 400i

Celestion Original spare part CDX1-1070 T5916AXP compatible with YAMAHA T5866A

Spare part tweeter 2.5 cm

Power : 20W / 8 Ohm

As used by Celestion CDX1-1010 - 

CELESTION CDX1-1070 8 Ohm Tweeter Magnet inkl. Diaphragm for Yamaha Stagepas 400i

• 1” exit light weight, low-profile ferrite magnet compression driver with
  1” copperclad aluminium voice coil
• 20Wrms (AES standard) power handling and 106dB sensitivity, 1500Hz – 20kHz frequency range
• Single piece PETP film diaphragm and surround
• Finite element analysis (FEA) used to optimise magnetic, acoustic and electro mechanical design
• Ideal for entry level two-way sound reinforcement cabinets

General Specifications
Power rating: 12Wrms
Nominal impedance: 8 Ω
Frequency range: 1.5kHz 20kHz
Sensitivity: 106dB
Recommended min. crossover: (12dB/oct) 2200Hz
Voice coil diameter: 25mm/1in
Voice coil material: Copper clad aluminium
Magnet type: Ferrite
Diaphragm material: PETP film
Surround material: PETP film

Mounting Information
Overall width: 70mm/2.8in
Overall depth: 50mm/2in
Fitting Flange: (2xM6 holes on 76mm/3in PCD)
Throat exit: 25mm/1in
Unit weight: 0.5kg/1.1lb

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω