| Content |
If the G12M was to become a classic,it was the G12H with its heavier magnet that really characterised the sound of rock guitar for the new breed of player that emerged in the 1960s.Listen to any Hendrix recording and the chances are youʼre hearing the unmistakably creamy tones of the G12H. Originally available in two versions – low resonance for bassists and high resonance for guitarists – both were in fact embraced by guitar players for their unique tonal characteristics.
The new Celestion G12His a perfect recreation of the low resonance model,right down to the voice coil former material,glue formulations and vintage,solder-only tag panel.Suitable for use in all cabs,it exudes thick,syrupy tones with a deep,growling bottom end.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 30WW | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 100dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Rounded copper | | Magnet type | Ceramic | | Magnet weight | 50oz, 1.42kg | | Frequency range | 55-5000Hz | | Resonance frequency, Fs | 55Hz | | DC resistance, Re | 6.53Ω & 12.11Ω |
| Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 5.3“, 135mm | | Magnet structure diameter | 6.6“, 168mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 10.4lb, 4.7kg |
|
- 98 dB sensitivity 1 W / 1 m
- 400 W + 60 W Power Handling
- 3" + 1.5" Copper Clad Sandwich Voice Coil
- Single Point Source providing coherent Wave Front
- Optical for compact 2-way Systems
|
| 400 W continuous program power capacity |
| | 70° nominal coverage |
| | 60 – 18000 Hz response |
| | 96 dB sensitivity |
| | Single Neodymium magnet assembly |
| | XO-6 dedicated crossover network |
|
- Neodymium Coaxial Transducer
- 98 dB Sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich Voice Coil
- Triple Aluminum demodulating Rings
- Elliptical 80° x 60° Waveguide for precise directivity
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quaity Sound
- Optimal for compact 2-way Systems
|
| 1400 W continuous program power capacity |
|
| 100 mm (4 in) copper voice coil |
|
| 45 – 1000 Hz response |
|
| 93 dB sensitivity |
|
| Double silicone spider with optimized compliance |
|
Specification
Nominal Diameter 320 (12) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 7.5 Ohm
Nominal Power Handling (2) 450 W
Continuous Power Handling (3) 900 W
Sensitivity (1W/1m) (4) 95 dB
Frequency Range 40 - 1000 Hz
Voice Coil Diameter 76 (3) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 (0.9) mm (in)
Magnetic Gap Depth 10.5 (0.4) mm (in)
Flux Density 1.15 T
Thiele & Small Parameters
Fs 42 Hz
Re 6.1 Ohm
Qes 0.22
Qms 3.8
Qts 0.2
Vas 75 (2.6) dm3 (ft3)
Sd 522 (80.9) cm2 (in2)
Eta Zero 2.4 %
Xmax +/- 7 mm
Xvar +/- 9 mm
Mms 74 g
Bl 23.5 Txm
Le 2 mH
Mounting and Shipping Info
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 140 mm (5.5 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.4 kg (18.5 lb)
Shipping Box 340x340x170 mm
(13.4x13.4x6.7 in)
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
Reviews
There are no reviews yet.