| Content |
-
- 8” neodymium magnet driver with 1.5” voice coil, providing 200Wrms (AES) continuous power handling
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in the magnet assembly provides low harmonic distortion
- M-roll surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
General specifications
| Nominal diameter (mm/in) |
203/8 |
| Power Rating (AES, W rms) |
200 |
| Nominal impedance (Ω) |
8 |
| Voice coil diameter (mm/in) |
50.8/2.0 |
| Magnet type |
Neodymium |
| Chassis type |
Cast aluminium |
| Sensitivity (dB) |
92 |
| Frequency range (Hz) |
70-6000 |
| Coil material |
Round copper |
| Cone material |
Kevlar loaded paper |
| Surround material |
Cloth-sealed |
| Suspension |
Single |
| Xmax (mm/in) |
4/0.16 |
| Gap depth (mm/in) |
8.0/0.32 |
| Voice coil winding width (mm/in) |
15.0/0.63 |
Small Signal Parameters
| D (m/in) |
0.17 |
| Fs (Hz) |
80.3 |
| Mmd (g/oz) |
22.39 |
| Mair |
1.94 |
| Qms |
1.33 |
| Qes |
0.59 |
| Qts |
0.41 |
| Re (Ω) |
5.85 |
| Vas (lt/ft3) |
11.3/0.399 |
| BI (Tm) |
11.22 |
| Cms (mm/N) |
0.16 |
| Rms (kg/s) |
9.6 |
| Le (mH) |
|
Mounting Information
| Overall diameter (mm/in) |
225/8.8 |
| Overall depth (mm/in) |
100/4.16 |
| Cut-out diameter (mm/in) |
187/7.4 |
| Mounting slot dimensions (mm/in) |
6.5/0.26 |
| Number of mounting slots |
8 |
| Mounting slot PCD/ width accross flats |
210/8.3 |
| Unit weight (kg/lb) |
1.52/3.34 |
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 5.9 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 92 dB
* Frequency Range 80 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.27“, 7 mm
* Flux Density 1.05 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 74 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 8.9 N/A
* Diaphragm Mass inc. Airload (Mms) 23 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2 Kg/s
* Electromagnetic Q (Qes) 0.69
* Mechanical Q (Qms) 5.30
* Total Q (Qts) 0.61
* Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
* Surface Area of Cone (Sd) 27.5“², 177.3 cm²
* Maximum Linear Excursion (Xmax)* 8.48 mm
* Xdamage** 12.9 mm
* Coil Inductance (Le) 0.6 mH
* Diaphragm mass (Mmd) 21.6 g
* Eta Zero 0.5 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Recone kit for FPW8N8150
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/203.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 6.4 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 95 dB
* Frequency Range 60 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.35“, 9 mm
* Flux Density 1.15 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 58 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 11.3 N/A
* Diaphragm Mass inc. Airload (Mms) 24 grams
* Mechanical Compliance of Suspension (Cms) 0.31 mm/N
* Rms 0.93 Kg/s
* Electromagnetic Q (Qes) 0.34
* Mechanical Q (Qms) 9.4
* Total Q (Qts) 0.35
* Compliance Equivalent Volume (Vas) 0.62 ft³, 17.6 dm³
* Surface Area of Cone (Sd) 30.8“², 199 cm²
* Maximum Linear Excursion (Xmax)* 8.15 mm
* Xdamage** 13.5 mm
* Coil Inductance (Le) 0.55 mH
* Diaphragm mass (Mmd) 22 g
* Eta Zero 1.02 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
| |
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2-way Systems
|
Reviews
There are no reviews yet.