CERWIN VEGA INT-152V2 Passive Speaker 15” 200W

15' 2-way full range speaker

• Frequency Response: +/- 3 dB 64 Hz - 19.8 kHz
• Frequency Response (1W /1M): -10 dB 46 Hz
• Nominal Impedance: Full Range 8 Ohms
• Axial Sensitivity (dB SPL, 1W / 1M): Full Range 95 dB
• Calculated Maximum Output dB SPL, @ 1M): Full Range 124 dB
• Power Handling (Watts): RMS 200 W | Program 400 W | Peak 800 W
• Nominal Coverage Angles / -6 dB points (Degrees):Horizontal 90° Vertical 50°
• Weight:26.2 Kg
• Dimensions (H x WF x WB x D): 781mm x 470mm x 264mm x 489mm

EV\'s Rx Series loudspeakers have become the go-to systems for contractors, regional sound companies, and anyone who wants to step up to high-end pro audio without blowing the budget. With integrate L-track rigging points on top and bottom, the Rx cabinets are easy to fly. The unique, asymmetrical, fully rotable horn provides a 15-degree down angle to ensure HF coverage where needed, while avoiding acoustic spill. EV\'s powerhouse DH7 large-format driver (3" voicecoil, 1.4" exit) provides the HF engine, while a selection of EV\'s DL and EVZ woofers anchor the LF and sub frequencies. EV\'s combination of high-level components and unique design make the QRx Series one of the best and most versatile values in the industry.

15-inch two-way, full-range loudspeaker system with 450 watts continuous, 1,800 watts peak power handling. Can be easily biamped with 400 watts LF and 75 watts HFcontinuous DH73-inch voice coil compression driver on an asymmetrical 75-? x 50-? fully rotatable constant-directivity horn. In factory-delivered position the horn provides a 15-?up/35-? down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined Five-sided cabinet design allows this main PA system cabinet to easily conform to duties as a floor monitor, as a front-of-house system or to be tucked tightly against a ceiling for low-profile applications. Available in black or white. 18-ply, void-free plywood enclosure comes equipped with metal stand mount, L-track rigging on the top and bottom and a single-stud pull-up point on the rear of the enclosure for use flexibility Ring-Mode Decoupling for beautifully detailed vocals and smooth midrange performance

• High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
• Available in black or white finish
• Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn
• Overload-protection circuitry ensures optimal HF driver protection
• Versatile trapezoidal enclosure design allows different positioning:
• -Stand mounting with 35-mm pole socket
• -Tilts on its side for use as a floor monitor
• Optional swiveling mounting brackets
• Ergonomically shaped handles for easy carrying and setup
• 2 professional speaker connectors plus 1⁄4'' jack connectors
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in our wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.

Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.

Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?

The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.

But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.

You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!

Wharfedale Titan 15 400W Rms - 1600W Peak ! 15" Moulded Lightweight Enclosure Passive Speaker

Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15” low frequency driver with 2” titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.

MODEL TITAN 15 PASSIVE
GENERAL INFO
System type 15” 2-way passive
Frequency response +/- 3db 50-18kHz
Sensitivity (db 1w@1m) 97dB
System impedance 8 ohms
Maximum SPL Peak dB 129dB
POWER HANDLING (Watts)
Continous RMS 400
Program 800
Peak 1600
LF DRIVER
Lf driver size mm / inches 1x15”
Lf voice coil size 75mm/3“
HF SECTION
Hf voice coil size 51mm/2“
Hf exit size mm / inches 25mm/1“
Hf type Compression Driver
Hf diaphragm material Titanium
Horn dispersion (H x V) 90 x 60
Hf horn shape EWG™ - Elliptical Waveguide
Hf peak indicator Peak LED ring in horn throat
CROSSOVER SECTION 2-way
Crossover Frequency / Filter 1.8kHz / 12dB per oct.
Hf driver protection DTF™ — Dynamic Thermal Filament (2 x SK3 Bulb)
CONNECTORS
IN / OUT PANEL (speaker Level)
Input connector 2 x 1/4” jacks and2 x Speakon™
PHYSICAL FEATURES
Enclosure type Molded Polypropylene
Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications
Finish Black or White
Handle quantity 2 carry handles (one on each side)
Suspenison points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint
Stand adapter - BOTTOM Pole-mount receptacle with lock screw, Optional wall-mount bracket
DIMENSIONS & WEIGHT
Height ( mm / ins ) 708mm/27.9“
Width Front / Rear / mm / ins 477.8mm/18.8“
Depth ( mm / ins ) 401.77mm/15.8“
Net weight ( kg / lbs ) 22kg/48.4 lbs
Gross weight ( kg / lbs ) 25kg/55 lbs.

The P6215 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for very high output and longer throw applications.

The high-frequency section is a constant directivity CMD horn loaded to a 1.3” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low frequency transducer is a 15” woofer with a 3” voice coil. The cabinet is equipped with 12 x M10 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. P6215 meets the requirements of IP 55 code (International Protection Rating)

The QRx153/75 is a biamped three-way full-range loudspeaker system capable of filling performance spaces with beautifully balanced audio and high acoustic output capability.

The QRx153 is designed to be bi-amplified at 500 Hz utilizing a DX38 digital controller, or a P1202 power amplifier with M153 control module. All QRx models use 13 ply plywood, Futura coating, and steel grilles for wear and weather resistance. The QRx153 is trapezoidal with 15° side angles. "L” track rigging is installed on the enclosure top and bottom. Small arrays can be flown for live work, or the system can be suspended horizontally or vertically for fixed installations.

Thanks to its combination of the DL15ST woofer and large enclosure volume; the horn-loaded 8-inch midrange driver and powerful 3-inch compression driver, the EV QRx153/75 has extended response for high-level, high fidelity applications without the need of a subwoofer. The horn-loaded midrange driver provides excellent pattern control in this critical response area. Both MF and HF horns are aimed downward 10° to provide optimal aiming when the speaker is elevated above the audience. This also helps control sound to provide greater intelligibility.

The QRx153/75 has an excellent combination of performance and flexibility for demanding audiences.