CERWIN VEGA CV-2800 HIGH PERFORMANCE PROFESSIONAL POWER AMPLIFIER 2x600W 8Ω

No longer available!

749.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: H06CV00003 Category:
Specifications     Front panel LED displays indicate power, clip protect and signal status     Balanced XLR and TRS Input connectors     Speakon NL-4 locking output connectors and binding posts     Detented 21-position input level control knobs     Defeatable limiter and high pass filter per channel     Short circuit, thermal, current limit, DC offset, current inrus, […]

 

Read more

Specifications

    Front panel LED displays indicate power, clip protect and signal status
    Balanced XLR and TRS Input connectors
    Speakon NL-4 locking output connectors and binding posts
    Detented 21-position input level control knobs
    Defeatable limiter and high pass filter per channel
    Short circuit, thermal, current limit, DC offset, current inrus, RF protection, Turn on/ Turn off muting protection
    5-way binding post and Speakon output connectors
    Flow-through cooling design prevents overheating with continuously variable speed, front to rear

Performance Data:

    Frequency Response: 0/-0.5dB ; 20Hz-20KHz, 0/-3dB: 5Hz-60KHz
    Rated Output Power (Stereo): 600 watts at 8 ohms; 900 watts at 4 ohms; 1400 watts at 2 ohms
    Rated Output Power (Mono): 1800 watts at 8 ohms; 2800 watts at 4 ohms
    At Full Power @4 ohms: 32A / 16A
    Signal to Noice Ratio: 20 Hz – 20k Hz – 104dB
    Distortion (SMPTE-IM): .04%
    Output Circuitry: H
    Damping Factor (400 Hz): 350

Weight 20.70 kg

Reviews

There are no reviews yet.

Be the first to review “CERWIN VEGA CV-2800 HIGH PERFORMANCE PROFESSIONAL POWER AMPLIFIER 2x600W 8Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

CERWIN VEGA CV-2800 HIGH PERFORMANCE PROFESSIONAL POWER AMPLIFIER 2x600W 8Ω removeRAM AUDIO S-1500 Power Amplifier 2x880 Watts removeBITTNER AUDIO XR-1500-2X750W-4 OHMS-POWER AMPLIFIER removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removePHONIC MAX-2500 PLUS Power Amplifier 2x750W remove
NameCERWIN VEGA CV-2800 HIGH PERFORMANCE PROFESSIONAL POWER AMPLIFIER 2x600W 8Ω removeRAM AUDIO S-1500 Power Amplifier 2x880 Watts removeBITTNER AUDIO XR-1500-2X750W-4 OHMS-POWER AMPLIFIER removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removePHONIC MAX-2500 PLUS Power Amplifier 2x750W remove
Image
SKUH06CV00003S-1500XR1500HC1600LDDP1600H06PH00017
Rating
Price 749.00 incl. GR VAT 1,160.64 incl. GR VAT 2,455.19 incl. GR VAT 1,004.39 incl. GR VAT 750.00 incl. GR VAT 449.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Specifications

    Front panel LED displays indicate power, clip protect and signal status
    Balanced XLR and TRS Input connectors
    Speakon NL-4 locking output connectors and binding posts
    Detented 21-position input level control knobs
    Defeatable limiter and high pass filter per channel
    Short circuit, thermal, current limit, DC offset, current inrus, RF protection, Turn on/ Turn off muting protection
    5-way binding post and Speakon output connectors
    Flow-through cooling design prevents overheating with continuously variable speed, front to rear

Performance Data:

    Frequency Response: 0/-0.5dB ; 20Hz-20KHz, 0/-3dB: 5Hz-60KHz
    Rated Output Power (Stereo): 600 watts at 8 ohms; 900 watts at 4 ohms; 1400 watts at 2 ohms
    Rated Output Power (Mono): 1800 watts at 8 ohms; 2800 watts at 4 ohms
    At Full Power @4 ohms: 32A / 16A
    Signal to Noice Ratio: 20 Hz - 20k Hz - 104dB
    Distortion (SMPTE-IM): .04%
    Output Circuitry: H
    Damping Factor (400 Hz): 350

The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon) back_s_l
OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

XR Series - Intelligent Power
New Horizons.

A lightweight with enormous power output. Combined with digital signal processing.
That's what we call flexibility! Locally controlled or completely networked.
No matter what the requirements are.
The integrated powerful digital signal processor (DSP) and controller allows
for a troublefree and easy adjustment to any acoustical environment.
Wear-free digital potentiometers, sequential remote power on,
alive contacts for easy supervision, computer controlled monitoring -
 its enless list of useful feature make it the right choice for any installation.
XR - the new definition of Intelligent Power

High Tech SMT Design
Digital Signal Processor
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX / Speakon
High-End Switched Power Supply with Power Factor Correction (not XR4000)
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed low noise fans
Digital wear-free Volume Controls (can be operated manually)
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Paging Input
Monitor Output
SXL Dataport
Perfect Weight-to-Power ratio
3 Years Warranty

Technical Data:
 
Class:  H
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.02%
Signal-to-Noise Ratio:  < -106 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  750 to 1200 @ 4 Ohm
Cooling:  4 Fans (temp. reg. variable speed)
Weight:  8 to 10 kg (18 to 22 lbs)
Dimensions:  2 RU / 483 x 88 x 454 mm(19" x 3.5" x 17.9“)

 

This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%.

A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.  The integral soft clip limiter protects against damage to the connected loudspeakers.  The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

 

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 800 Watt rms 
Power output stereo 4Ω:2 x 650 Watt rms 
Power output stereo 8Ω:2 x 350 Watt rms 
Power output bridged 4Ω:1600 Watt rms 
Power output bridged 8Ω:1300 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 103 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start, Thermal on transformer 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:7.5 A 
Power Consumption:2700 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:19.5 / 42.98 Kg/Lbs 
SHIPPING INFORMATION
Package height:150 / 5.9 mm/inch 
Package width:555 / 21.85 mm/inch 
Package depth:525 / 20.66 mm/inch 
Shipping Weight:20 / 44.09 Kg/Lbs

 

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms) 2 x 800 W
Rated ouput power (1kHz @ 4 Ohms) 2 x 650 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 450 W
Rated ouput power (1kHz @ 4 Ohms, bridged) 1600 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 1300 W
Output circuitry Class H
Frequency response 20 - 20000 Hz
THD < 0.1 %
Signal-to-noise ratio 106 dB
Damping factor > 400
Crosstalk >80 dB
Gain 39 dB
Input sensitivity 0.775 V
Protection circuits clip limiter , DC protection , short circuit , thermal overload
Controls 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling highly efficient, automatic
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Weight 15,9 kg
Features Volex mains socket
Phonic\'s MAX 2500 Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 amp is achieved via combo connectors that accept both XLR and 1/4\' jacks, and output is achieved through either Speakon?-type connectors or binding posts. The MAX 2500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4\' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting
Weight20.70 kg8.00 kg9.00 kg20.00 kg15.90 kg18.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 20.70 kg
Weight 8.00 kg
Weight 9.00 kg
Weight 20.00 kg
Weight 15.90 kg
Weight 18.00 kg