| Content | MagicQ Software
MagicDMX is a low cost, single universe USB DMX interface created by ChamSys which contains an on board processor to process the DMX packets. Because all timing is done by the interface rather than relying on the host operating system, this ensures that the DMX timing is correct and consistent. MagicDMX connects to MagicQ running under Windows, Mac or Linux. It doesn\'t use any special drivers for the device, so you can just plug and play. MagicDMX defaults to outputing on Universe 1 from the MagicQ software but can be used on any universe.
MagicDMX has electrical protection for normal usage. Users requiring full optical isolation should consider the MagicQ Twin DMX Interface, the SnakeSys 4 Universe Ethernet Interface or any of the MagicQ Wing products which all have full optical isolation.
The MagicDMX interfaces do not unlock the restricted features of MagicQ software such as remote control via iOS/Android, audio input and full screen execute window. Users requring these features will need a ChamSys interface such as Twin DMX Interface, Mini Wing, PC Wing Compact or SnakeSys interface.
Note, MagicDMX interfaces to do remove the \'demo mode\' banner from MagicQ. The MagicDMX Full will output a single universe of DMX without any time restriction.
The MagicDMX Full interface is aimed at Professional users wishing to have uninterrupted DMX lighting control for shows and installations. The MagicDMX Full provides a great lighting troubleshooting system.
It can be configured to either output or input a single universe of DMX, but unlike the MagicDMX Basic interface, MagicDMX Full is not time limited and can be used continuously.
MagicDMX Full outputs DMX via a 5 pin female XLR connector. If you want to use the MagicDMX interface in DMX input mode a gender reverser is required.
MagicQ Software
MagicQ software offers powerful lighting control with loads of features that lighting designers have come to rely on, such as full lighting visualisation, pixel mapping, and HD media playback on up to 8 different layers, all integrated smoothly to streamline workflows, save time, and shorten learning curves on even the most complex lighting systems.
- MagicVis Visualiser
- Magic HD Pixel-Mapper
- Morphing
- Cloning
- Patch Offsetting
- Group and Palette FX
Download Software | The Cameo W-DMX™ T2 is the successor to the W-DMX T1™ with a higher transmission range and Bluetooth connectivity for configuration. It is a member of Wireless Solution's acclaimed BlackBox series of transceivers for wireless lighting control supporting both transmit and receive modes of DMX and RDM signals in the 2.4 GHz frequency band. Built for professional applications, the roadworthy die-cast metal housing is packed with patented W-DMX™ technologies. These include Adaptive Frequency Hopping to automatically avoid interference created by other wireless networks, and Data-Safe error correction that protects DMX and RDM data from corruption.
The Cameo W-DMX™ T2 features Neutrik 3-pin and 5-pin DMX inputs and outputs, an automatically switching power supply for multi-voltage operation plus a gold-plated Phoenix connector for 12 V battery powering. The G5 transceiver is backward compatible with W-DMX™ G3, G4, G4S and G5 units. It comes with a 3 dBi single-band antenna providing an operating range up to 700 m, N-type antenna adapter and a 19" rackmount kit.
The Cameo W-DMX™ T2 is also prepared for upgradeable CRMX compatibility, making it a versatile transceiver.
CRMX upgrade license code available for 99€ upon request. Please contact our inside sales team.
Product type
LED Moving Lights
Colour spectrum
Cold white
Refresh rate
adjustable to 25000 Hz
DMX input
XLR 3-pin male, XLR 5-pin male
DMX output
XLR 3-pin female, XLR 5-pin female
DMX mode
34-channel, 50-channel
DMX Functions
Animation Wheel, Auto Movement, Colour wheel, CTO, CTO Fine, Cyan, Cyan Fine, Device Settings, Dimmer, Dimmer Fine, Focus, Focus Fine, Framing Blade Rotation, Framing Blades, Frost, Gobo Wheel 1, Gobo Wheel 2, Iris, Magenta, Magenta Fine, PAN, PAN FINE, Prism, Rotation Fine Gobo Wheel 1, Rotation Gobo Wheel, Rotation Prism, Set Dimmer Curve, strobe, TILT, TILT FINE, Yellow, Yellow Fine, Zoom, Zoom Fine
High Speed Strobe
> 20 Hz
Standalone modes
Auto Mode, Device Settings, Static
Controls
Enter, Mode, Touch screen, Value Down, Value Up
Indicators
Graphic Display, Touch-Graphic Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Ambient temperature (operating)
-15 - 45 °C
Power connector
Neutrik powerCON IN / OUT
Housing material
ABS plastic, Metal
Cooling
Heat-pipe cooling system with temperature controlled fans
Illuminance
100,000 lx @ 3m, 39000lx @ 5m
Accessories (included)
2 x Omega Clamp, Power cord
|
Work C 72 DMX
CD 72 DMX is a DMX to Analog signal converter suitable for 72 analog channels.
It converts DMX and MIDI signals into analog signals. It allows using an analog dimmer with DMX consoles, setting parameters like DMX start address channel, MIDI note selection, etc.
It also works as a chaser with adjustable speed to record and program scenes from a DMX console. With its Hold function, it provides memory against current failures that maintain the last DMX configuration.
C 72 DMX sends analog signals through SUB-25 connectors. Their input voltage can be set (from DC +10V, DC +15V or DC +20V) with DIP switches. Polarity can be switched too.
DMX to analog signal converter.
Adjustable voltage level for outputs (DC 10, 15, 20 V).
Voltage polarity selector.
72 channel chaser operating mode.
Programmable DMX start address channel.
Programmable chase speed.
Memory against current failures.
Main supply: 230 V AC 50 Hz.
Dimensions (WxHxD): 483 x 44 x 120 mm.
Weight: 2.3 kg.
|
- USB interface with 512 DMX channels in live mode
- Integrated flash memory for 256 DMX channels in stand-alone mode
- User-friendly, intuitive Cameo DMX software "by Daslight” for Windows and Max OS X available to download free
- Internet connection required for hardware registration and software activation
- Standalone mode upgradable to 512 DMX channels
- Over 15,000 device libraries and a built-in ScanLibrary editor for creating and editing your own device profiles
- Powerful XEEL engine for hundreds of impressive pixel and video effects and movements for moving heads and scanners
- Touchscreen control plus remote control of essential features via iOS and Android smartphones and tablets or MIDI controller
- Audio analyser and MIDI clock for synchronising lightshow and music speed
- Real-time programming and 3D visualisation of lightshow
- Compatible with Light Raider app on Android devices via USB (free 30-day trial version available for download)
DMX-compatible light units can be conveniently operated via PC and Mac with the Cameo DVC Interface and associated Cameo software powered by Daslight. Used in live mode, the plug-and-play interface provides 512 DMX channels. When used in standalone mode without a computer it offers 256 channels and programmed lightshows can be copied to the integrated Flash memory. The interface features a mini USB port for input, a 3-channel DMX output and is supplied with power via a computer’s USB output. Three buttons facilitate programme selection and dimming in standalone mode. This requires a standard retail 5 V USB power adapter.
The free Cameo software package contains over 15,000 device libraries and a ScanLibrary editor for creating and editing your own device profiles. Individual DMX devices can be selected, placed in groups and added to a 2D view of the lightshow. Dynamic scenes can be created, arranged and placed over each other. The palette feature facilitates light control without fader movements, and the XEEL engine creates hundreds of wide-ranging, exciting effects.
The software includes a comprehensive toolbox for live editing, an audio analyser, a MIDI clock for synchronising light and music speed, and 3D visualisation of the programmed lightshow in real time. The screen layout is fully customisable to individual needs and the free Easy Remote app facilitates remote control by iPhone, iPad and Android devices via Wi-Fi.
After successful registration at https://store.dmxsoft.com/, hardware and software upgrades (fees may apply) are available. These include upgrades for the standalone and live channels, as well as temporary and unlimited licences from Light Rider, and much more.
The DVC interface and free software have been specially developed for Cameo by Daslight. Please refer technical queries to SUPPORT@DASLIGHT.COM.
Product type
USB to DMX Interface
Live channels
512
Stand Alone channels
256 (upgradeable to 512)
Software Mode
full Cameo D4 / full Daslight D4
Inputs
Mini USB
Outputs
XLR 3-pin female
Memory
64 K
Dry contact ports
8
Operating voltage
5 V USB bus powered
Width
78 mm
Height
27 mm
Depth
88 mm
Accessories (included)
USB to Mini USB cable
Weight
0,193 kg |
- DMX wireless transmitter in miniature format for the wireless transmission of up to 512 DMX channels
- User friendly 3-pin XLR (male) connector with swivel antenna
- Wireless DMX eliminates the need for complex cabling between DMX controllers and DMX-controlled devices in lighting setups
- Due to GFSK modulation with 78 channels, interference-free operation is also possible alongside other QuickDMX receivers and wireless devices in the 2.4 GHz band (e.g. WLAN and Bluetooth)
- Operating range of up to 400 m
- From one up to 512 QuickDMX receivers can be operated per transmitter
- A maximum of 6 transmitters can be operated simultaneously, giving a total of 3072 DMX channels that can be controlled
- Plug & Play: Quick and easy setup with one operating button for connecting / disconnecting QuickDMX receivers
- LED function display
- Powered via included power supply
Technical specifications:
- 2.4 GHz ISM Band - No license is required and no charges are incurred when used anywhere in the world
- Power supply: 100 - 240 V AC, 50 / 60 Hz via included power supply
- Wireless transmission in the 2.4 GHz band (ISM)
- 78 Channels
- Modulation: GFSK
- Operating range: 400 m (with line-of-sight)
- DMX connector: 3-Pin XLR
- DMX channels: 1 Universe (512 channels)
- Dimensions with antenna (L x W x H): 212 x 18 x 18 mm
- Weight: 80 g
|
| Power supply: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
| Power consumption: |
1 W |
| Power connection: |
Mains input via 4-pin screw plug connector (M) mounting version power supply cord with AC adapter (provided) |
| DMX input: |
2 x 3-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version |
| Use of brands: |
Built with NEUTRIK connector |
| Dimensions: |
Width: 13 cm
Depth: 7 cm
Height: 4,1 cm |
| Weight: |
500 g |
|
Reviews
There are no reviews yet.