| Content |
Hurricane 1400 is a compact, lightweight, high output fog machine with residue-free water based fog output. Always Ready technology provides fog on demand and the manual fog button or included timer remote puts easy control and variable output at your fingertips. Hurricane 1400 features an advanced fluid sensor, with automatic shut-off that protects the pump from overheating. The LED-illuminated tank enhances operation and safety.
• Compact, lightweight, high output fog machine
• Variable output from the included timer remote
• Always Ready technology provides fog on demand
• Advanced fluid sensor, with automatic shut-off protects the pump from overheating
• Manual fog button provides easy control at your finger tips
• Residue-free water based fog output
• LED-illuminated tank enhances operation and safety
• Tank Capacity: 0.5 gal (2 l)
• Included Remote Length: 15 ft (4.5 m)
• Heat-up Time: 3 min
• Output: 21,500 cfm
• Fluid Consumption: 100 ml/min
• Input Voltage: 120 VAC, 60 Hz or 230 V, 50 Hz
• Power and Current: 1,530 W, 12.4 A @ 120 V, 60 Hz
• Power and Current: 1,530 W, 6.6 A @ 230 V, 50 Hz
• Weight: 10.2 lb (4.7 kg)
• Size: 14.2 x 10.1 x 9.3 in (360 x 256 x 235 mm)
• Compatible Fluids: FJU, HDF
• Optional Controllers: FC-W
• Approvals: CE
|
Jem Air Force 1 Fan speed 0 – 2500 rpm 1600 cubic m/hr. Single channel DMX operation. Analogue link sockets. Floor standing or truss mounting. Low voltage multifunctional Remote control. Sealed fan motor. Converts smoke to haze, Wind effects. Projects smoke down long lengths of ducting. Keeps equipment cool: Amp racks, Dimmer racks.
|
MDG MAX 3000 APS Smoke Machine 715W
Extremely powerful,adjustable fog output
Virtually noiseless, with the finest fog and the longest hanging times
Automatic Purging System (APS) to prevent build-up and clogging
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute)
Portability option
TECHNICAL DATA
MAX 3000APS
Maximum fog output 85 m3 (3,000 ft3)
per minute
Fluid consumption 1 L (34 oz)
per hour at 2.76 bar (40 psi)
Gas type CO2 or N2
Gas consumption 0.97 kg (2.13 lb)
per hour at 2.76 bar (40 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Automatic Purging Standard feature
System (APS)
Fog colour Pure white
Particle size 0.5-0.7 microns
Warm-up time (maximum) 8 minutes
Fluid type MDG Neutral Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC,
50/60 Hz
Power consumption 715 W
Dimensions Length 61 cm (24?)
Width 18 cm (7?)
Height 30 cm (12?)
Weight 20 kg (43 lb)
Shipping weight 33 kg (72 lb)
(with flight case)
Approval CE approved, CSA
and UL pending |
Martin JEM CLUB SMOKE Machine - Remote Control
| Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg |
JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.
|
Reviews
There are no reviews yet.