Content |
Small and Effective for presentations and theater applications
The C111LP is a stainless steel & lightweight ear hook microphone ideal for presentations and theater applications. Its ultra light construction and design ensures robustness and reliability, while allowing perfect adjustment and fit to any speaker or performer. The inconspicuous and skin colored boom won’t distract from what matters most, the performance.
Weighing an amazingly light 7g, the C111LP is comfortable to wear during even the longest performances. Delivered with a carrying pouch, windscreen and cable clip, it is suitable for all AKG pocket transmitters.
Ultra lightweight construction
for maximum comfort
Stainless steel
for reliable performances
Soft and flexible boom
designed for individual adjustment and ease of use
Maximum plug and play options
fits all AKG pocket transmitters within the AKG range
|
Features:
Smallest, lightest, most comfortable microphone of its kind
User-friendly for new and experienced users alike
Excellent for singing and spoken word applications
Extremely popular in houses of worship, theater and broadcast settings
Almost invisible against many skin tones
Rugged, bendable boom assures a custom fit for every wearer
Hands-free, wireless-enabled microphone allows total freedom of movement
Exclusive snap-on cables in 1mm or 2mm diameter for field replacement or compatibility with various wireless systems
Highly resistant to sweat and moisture
High quality voice pickup - more consistent than any lavalier
Excellent rejection of surrounding noise
Reduces feedback in meeting rooms or houses of worship an average of 12dB compared to an omni lavalier
Omnidirectional microphone is virtually immune to wind and breath pops, even without a windscreen
|
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
Included Accessories
- pop filter,
- clip,
- tool kit,
- anti trauma case,
- mini furry,
- micon cable
Type | Condenser | Pick Up Pattern | Omni-directional | Frequency response | 60Hz - 18kHz | Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz | Ιmpedance | 3000Ω | Dimensions | 140.00mmW x 65.00mmH x 200.00mmD | Weight | 6.50gm | Accessories | pop filter, clip, tool kit, anti trauma case, mini furry, micon cable |
|
Shure WCM16 Headworn Condenser Microphone
The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.
Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.
The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.
Features:
Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes
Specifications:
Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)
| Features
- Excellent feedback rejection
- Microphone includes a detachable cap as integral wind/popshield
- Individually adjustable to all head sizes
- Neckband design keeps the microphone clear from shirt-collar or clothing
- Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side
- Microphone boom is adjustable in length and angle
- Flexible gooseneck section
- Connection cable can easily be interchanged
- All metal parts coated in a physical vapour deposition process
- Can also be used with the omni-directional HSP 2 boom microphone
Delivery Includes
- Boom microphone
- Neckband
- Connection cable
- Plastic transport case, foam-lined with cut-outs
- Operating instructions
Technical Data
- Pick-up pattern cardioid
- Frequency response 40...20 000 Hz
- Nominal impedance (@ 1 kHz) 1000 Ohm
- Min. terminating impedance 4700 Ohm
- Sensitivity in free field, no load (1kHz) 4 mV/Pa
- Maximum sound pressure level (passiv) 150 dB
- Equivalent noise level 37 dB(A)
- Current consumption ca. 250 µA
- Operating voltage (stand alone) 4,5-15 V
- Cable length 1,6 m
- Diameter microphone head 8,4 mm
- Diameter boomarm 2,4 mm
- Weight 9,2 g (without cable)
| Headset Mikrofon for WS 100 Series, WS 1000 Series, WS 1616 Series and WS ECO Series
- Uni-directional Electret Condenser Headset Microphone
- Impedance
- Frequency range : 20Hz - 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Headsets
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,06 kg |
Reviews
There are no reviews yet.