JBL CONTROL 1 PRO Speaker 2 Way 150W RMS 4 Ohms (White)

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam

PRICE IS PER PIECE AND NOT PER PAIR!

• 70 Hz to 23 kHz frequency range (-10 dB)
• 200 watts continuous program power capacity
• 87 dB sensitivity (1W/1m)
• 100° x 100° nominal dispersion
• 60W, 30W, 15W, 7.5W taps at 70V
• 60W, 30W, 15W taps at 100V
• 8 ohms bypass
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Video shielded for use near video monitors
• Stainless steel grille for harsh environments
• Zinc-plated screw down input terminal strip
• Available in black or white (Control 25AV-WH)
• Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
• Net Weight:  4.0 kg (9 lb)

The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam

Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)