Content |
- 60 Hz to 16 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 92 dB sensitivity (1W/1m)
- 8 ohms nominal impedance
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 5.5 kg (12 lb)
| The Electro-Voice ZX1i is the new standard of no compromise audio performance and versatility in an easy to install, compact sound reinforcement package.
The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise.
ZX1i installation is incredibly simple with the included QuickSAM mounting system. The QuickSAM system is a unique, integrated mounting bracket which is virtually foolproof. It allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which allows multiple units to be mounted together for a variety of configurations. |
The Monitor 88 is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidelity, the ability to produce deep controlled bass and extended high frequencies without sacrificing efficiency.
The low-frequency 8“driver ʼs low-mass, carbon fiber diaphragm remains extremely rigid at high power levels,producing a more linear response and lower distortion.
The high-frequency section features a constant directivity horn with a built-in mechanical phase equalizer.
The horn is driven by a Ferrofluid® cooled,1“titanium dome tweeter.
All components are housed in a vented enclosure formed from semiexpanded polystyrene foam.
The speaker system is available in black (Monitor 88)or white (Monitor 88W).
Features |
---|
High quality music reproduction | Transducers LF 8" - HF 1" constant directivity tweeter | Built-in low inductance passive crossover with high frequency dynamic protection, bass refl ex @65Hz | Lightweight, UV/weather resistant, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion | Integrated mounting points for use with optional mounting hardware |
Acoustical Specifications |
---|
Type Of Speaker: | Two-way | | Frequency Response: | 70 Hz | ÷ 20 kHz | Max SPL @ 1m: | 120 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 80° | | Power Handling: | 300 Watt RMS | | System Sensitivity: | 91 dB | | Impedance: | 8 Ω | | Crossover frequencies: | 3 Hz | |
TRANSDUCERS |
---|
Speaker: | 8“ | | Tweeter: | 1“ | |
INPUT SECTION |
---|
Input connector: | Push type terminal | |
CABINET |
---|
Hardware: | Body in self-extinguishing | | Colour: | White / Black | | Grille: | Steel | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 430 / 16.92 | | Width: | 290 / 11.41 | | Depth: | 260 / 10.23 | | Net Weight: | 15 / 33.06 | |
SHIPPING INFORMATION |
---|
Package height: | 535 / 21.06 | | Package width: | 370 / 14.56 | | Package depth: | 355 / 13.97 | | Shipping Weight: | 16.5 / 36.37 |
|
The P3108 is a weatherproof full range, wide-dispersion, two way loudspeaker system for offering substantial power and efficiecny for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 8” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped 4xM8 brass inserts and stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 3108 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features |
---|
Weatherproof cabinet IP 55 | Aluminium grill and stainless steel bracket | One 8" high-output LF transducer with 2.5" voice coil | Once RCF Precision Neodymium 1" Compression Driver with 1:5" voice coil | 90° x 60° constant directivity horn | Built in passive crossover | 2° x 15° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | 4 brass suspension points (M8) | Imput connector 4 pole Amphenol IP 67 |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | Max SPL @ 1m: | 125 dB | | Horizontal coverage angle: | 90°° | | Vertical coverage angle: | 60°° | | Directivity index; Q: | 11 | | System Sensitivity: | 94 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Protections: | Dinamyc | | Crossover frequencies: | 1800 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Woofer: | 8" woofer, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 300 Watts AES | | Sensitivity: | 95 dB | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Gray | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 266 / 10.47 mm/inch | | Width: | 493 / 19.41 mm/inch | | Depth: | 250 / 9.84 mm/inch | | Net Weight: | 10 / 22 Kg/Lbs |
|
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.
|
- 37 Hz to 18 kHz frequency range
(-10 dB) - 150W pink noise, 300 watts continuous program power capacity
- 110 x 85 degree coverage with rotatable horn
- 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
- 8 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 29AV-WH)
- Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
- Net Weight: 12.2 kg (26.8 lb
|
Reviews
There are no reviews yet.