Content |
- 37 Hz to 18 kHz frequency range
(-10 dB) - 150W pink noise, 300 watts continuous program power capacity
- 110 x 85 degree coverage with rotatable horn
- 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
- 8 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 29AV-WH)
- Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
- Net Weight: 12.2 kg (26.8 lb
|
* 60° x 40° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 60° x 40°, rotatable waveguide
Directivity Factor (Q) : 20
Directivity Index (DI) : 13 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.3 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL : Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m): : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 115 dB SPL
Waveguide : PT-K64MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.
|
- 37 Hz to 18 kHz frequency range
(-10 dB) - 150W pink noise, 300 watts continuous program power capacity
- 110 x 85 degree coverage with rotatable horn
- 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
- 8 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 29AV-WH)
- Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
- Net Weight: 12.2 kg (26.8 lb)
|
Powerful monitor-speaker - Active speaker-system for direct connection with the signal source
- 2-way speaker-system
- Clear and powerful sound
- 2-band EQ master-signal and master-signal
- Wide range of uses in spite of minimum size
- Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
- Delivery includes mounting bracket for ceiling or wall installation
Technical Information:
Power supply: | 230 V AC, 50 Hz ~ | Power consumption: | 125 W | Amplifier power: | 80 W | Components: | 8" woofer, 1 tweeter | Inputs: | 1 Line In | XLR | Outputs: | 1 Line Out | XLR | Max. SPL: | 90 dB | Impedance: | 8 Ohms | Frequency-range: | 40 Hz - 20 kHz | Dimensions (H x W x D): | 360 x 270 x 240 mm | Weight: | 8 kg (piece) | | Installation version with integrated surface mount bracket. The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement. The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise.
The ZX1ʼs long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1.25” voice coil titanium diaphragm true compression driver for maximum output with extended frequency response. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.
The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizontally or vertically for the ultimate in coverage flexibility. The ZX1ʼs molded polymer enclosure is inherently water resistant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage monitor.
Features:
- Extremely Smooth, Wide Frequency Response
- Attractive, Clean Design with Full Grille
- EV8L 8” High-Output LF Transducer
- DH2005 1” Exit True Compression Driver
- 90° x 50° Coverage Pattern
- Rotatable Horn Design
- Integral Monitor Angle on Enclosure
- 200W Cont., 800W Peak Power Handling
- High Sensitivity, 123 dB Maximum SPL
- Integrated surface mounting bracket
Specifications:
- Sensitivity 1W/1m 94 dB
- Max. SPL / 1m (calc); full space 123 dB
- Coverage (nominal -6dB) H° 90 °
- Coverage (nominal -6dB) V° 50 °
- System Power Handling (continuous/program/peak) 200/400/800 Watts
- Nominal Impedance (Passive) 8 Ohms
- Chassis Size 8 inches
- Weight Net 8.4 kg ( 18.52 lbs )
- Dimensions (HxWxD) 451 x 282 x 263 mm (17.76" x 11.1" x 10.35“)
|
Reviews
There are no reviews yet.