85 Hz to 22 kHz frequency range (-10 dB) 50 watts continuous program power capacity 86 dB sensitivity (1W/1m) 8 ohms nominal impedance 3.5 kHz crossover frequency High-Impact Polystyrene (HIPS) enclosure Spring-loaded input terminals Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in) Net Weight: 1.8 […]
The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.