Content |
- 85 Hz to 22 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 8 ohms nominal impedance
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
The DYNACORD VL262 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Order-# D113101 Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam
|
The SR-H2S Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 90 - 17,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 20゜
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 663.4 (H) × 115 (D) mm (3.31" × 26.12" × 4.53“)
Weight 4.2 kg (9.26 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
|
Compact design and a wealth of mount-ing options make the RCF Monitor 33T (black) and Monitor 33/WT (white) Compact 2-way loudspeakers ideal for use in business music systems.
The woofer is a high-excursion, carbon fiber design.
The mylar dome tweeter is mounted on a contant directivity horn to provide natural, smooth sound reproduction and high resistance to weather.
Installation of the Monitor 33T is fast and efficient using the accompanying adjustable mounting bracket.
Four M6 threaded inserts add to the speaker's flexibility.
Connections are made to recessed color-coded, spring-loaded terminals.
Wattage taps, voltage adjustments, and 4-ohm operation are selectable by means of two detented rotary switches.
The enclosure is constructed of high density, scratch resistant polystyrene and includes a protective perforated steel grille and connection cover.
The Monitor 33T is a part of RCFʼs Monitor Series, which includes two-way constant directivity, compact speakers in easily installed enclosures.
Features |
---|
Ideal for high quality paging and music reproduction | Low impedance (4Ω - 40W) or 100V operating mode | Two-way system, woofer with carbon fi ber cone, 0.5" tweeter in Mylar on constant directivity horn | Built-in low inductance passive crossover, bass refl ex @150Hz | Orientable mounting accessory included | Body in self-extinguishing composite material, UV resistant | MR 33T: Colour RAL 9005 black |
Acoustical Specifications |
---|
Type Of Speaker: | Compact two-way | | Frequency Response: | 160 Hz | ÷ 20 kHz | Max SPL @ 1m: | 105 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 100° | | Power Handling: | 40 Watt RMS | | System Sensitivity: | 88 dB | | Crossover frequencies: | 3 Hz | |
TRANSDUCERS |
---|
Speaker: | 4.75“ | | Tweeter: | 0.5“ | |
INPUT SECTION |
---|
Input connector: | Push type terminal | | Constant voltage: | 100 V 70 V 50 V 25 V V | | Power Selection: | 20 - 10 - 5 - 2.5 - 1 W (100 V) | |
CABINET |
---|
Hardware: | Body in self-extinguishing composite material | | Colour: | White / Black | | Grille: | Steel | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 216 / 8.5 | | Width: | 154 / 6.06 | | Depth: | 136 / 5.35 | | Net Weight: | 2.14 / 4.71 | |
SHIPPING INFORMATION |
---|
Package height: | 300 / 11.81 | | Package width: | 240 / 9.44 | | Package depth: | 215 / 8.46 | | Shipping Weight: | 2.69 / 5.93 |
| Price per speaker
Specifications :
150 Watts Continuous Power Handling
Professional Drivers and Crossover Network
Included Mounting Bracket
Transparent and Faithful Sonic Performance
Magnetically Shielded Transducers
SonicGuard™ Overload Protection
Available in Black or White Finishes
Frequency Range
(-10 dB)
:
80 Hz to 20 kHz
Frequency Response
(± 3 dB)
:
I00 Hz - 18 kHz
Power Capacity
:
I50 W
Sensitivity
:
87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL
:
108 dB continuous, 114 dB peak
Directivity Factor (Q)
:
6.0
Directivity Index (DI)
:
7.8
Nominal Impedance :
4 ohms
Crossover Frequency :
4.2 kHz
Overload Protection :
Full-range SonicGuard™ power limiting to protect network and transducers
Transducers
LF Drivers :
135 mm (5.25 in) low
frequency loudspeaker
HF Drivers :
19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors :
Spring-loaded terminals
Enclosure
Enclosure Material :
Polypropylene Structural Foam
Finish :
Black (C1Pro) or White (C1Pro-WH)
Dimensions :
235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each) :
1.8 kg (4 lb)
Shipping Weight (pair) :
4.6 kg (10 lb)
Included Accessories :
Mounting Bracket Assembly
Optional Accessories :
MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket |
Reviews
There are no reviews yet.