CROWN XLS-1002 Power Amplifier 2Χ350W/4Ω

409.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb (5 kg) Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven […]

 

Read more

  • Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
  • Higher DSP capabilities: More control; has band pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide flexibility
  • Integrated PureBand™ Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise > 97dB (at .775Vrms sensitivity, 6dB lower)
Intermodulation Distortion
Damping Factor > 200
THD
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 7.7″ (19.6 cm)
Weight 8.6 lbs (3.9 kgs)
Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN XLS-1002 Power Amplifier 2Χ350W/4Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN XLS-1002 Power Amplifier 2Χ350W/4Ω removeFOSTEX RM-2 Amplifier d-class (10W x 2) removeINTERM R-500 PLUS AMPLIFIER 2X250W removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeAMERICAN AUDIO VLP-600 Power Amplifier 2x300 Watts removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS remove
NameCROWN XLS-1002 Power Amplifier 2Χ350W/4Ω removeFOSTEX RM-2 Amplifier d-class (10W x 2) removeINTERM R-500 PLUS AMPLIFIER 2X250W removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeAMERICAN AUDIO VLP-600 Power Amplifier 2x300 Watts removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS remove
Image
SKUXLS-1002RM 2R-500 PLUSL500E002985ED600
Rating
Price 409.00 incl. GR VAT 435.00 incl. GR VAT 761.00 incl. GR VAT 1,070.11 incl. GR VAT 470.00 incl. GR VAT 585.89 incl. GR VAT
Stock

In stock

In stock

In stock

Only 1 left in stock (can be backordered)

In stock

Available on backorder

AvailabilityIn stockIn stockIn stockOnly 1 left in stock (can be backordered)In stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
  • Higher DSP capabilities: More control; has band pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide flexibility
  • Integrated PureBand™ Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise > 97dB (at .775Vrms sensitivity, 6dB lower)
Intermodulation Distortion
Damping Factor > 200
THD
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19" (48.3 cm) x 3.5" (8.9 cm) x 7.7" (19.6 cm)
Weight 8.6 lbs (3.9 kgs)
  • Rack mount stereo powered monitor speaker system
  • New AES/EBU digital input
  • lndependent MUTE function
  • Sophisticated control panel section
  • Ideal where space is at a premium
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.
  • Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
  • AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
  • Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
  • Independent MUTE function by holding down CH SEL key for a while.
  • Auto Mute when powering on*.
  • D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
  • Multi-voltage power supply.

Speaker Section

  • Unit: 110 x 40mm cone type, magnetically shielded, x 2
  • Impedance: 8 ohms
  • Output SPL: 84 dB/W (1m)
  • Frequency response: 200Hz to 20kHz

Amplifier Section

  • Rated output power: 10W or more (8 ohms, 1kHz)
  • Residual noise: -60 dBV or less (DIN AUDIO)
  • Distortion: 0.5% or less (10W / 4 ohms, 1kHz)

Digital input

  • Connector: XLR-3-31 type
  • Digital input Format: IEC60958 (AES/EBU)
  • Digital inputSampling frequency: 44.1kHz to 96 kHz

Analog input

  • Connector: XLR / 1/4" combi-jack
  • Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
  • Analog input Input impedance 10k ohms or more

Phones

  • Connector: 1/4" stereo jack
  • Applicable load imp. 8 ohms or more
  • Rated output power 20mW + 20mW (32 ohms, 1kHz)

General

  • External dimensions: 430(W) x 44(H) x 282(D) mm
  • Weight: Approx. 3.5kg
  • Power requirement: 100 - 240V~, 50/60Hz
  • Power consumption: 10W

Power Output Level R-300 PLUS

STEREO
8ohm(T.H.D 0.05%)  170W+170W
4ohm(T.H.D 0.05%)  250W+250W

BRIDGED MONO
8ohm(T.H.D 0.05%)  460W
8ohm(T.H.D 0.5%)    500W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

The model L 500 is a 2 x 250 Watts Power Amplifier. Linear Precision Series
power amps combine excellent audio performance, modern and innovative
circuit design, meticulous and exceptionally rigid construction, and the highest
levels of operational integrity and reliability with an appropriate and more than
realistic price. The robust steel chassis provides outstanding torsional strength
through L-shaped side panels reaching under the thick aluminium front panel.
Thermal breakers prevent the power supply units from being damaged by thermal
overload. Electronically controlled fans provide sufficient front-to-rear airflow and
a special cool air diverter takes care of thermal stability. The fans? noise-level is
extremely low which provides the possibility for studio use. If necessary, a supplied
air-filter can be mounted behind the front panel ventilation louvres.
 
Features
* Excellent audio performance
* Symmetrical topology
* Ultra-low distortion
* Generously dimensioned power supply units
* Suitable to be operated on loads down to 2 ohms
* Suitable to drive complex loads with phase angles of ± 90 degree
* Extensive protection circuitry
* Unique Back-EMF protection
* Switchable limiters
* Switchable Hi/Lo-Cut filters
* Robust steel chassis
* Exceptional low noise front-to-rear air-flow
* XLR-type inputs and direct-outs
* LED display shows On, In, Out, Limit and Protect
* Highly reliable operation

Specs
* Max. Output Power - into 8 ohms : 2 x 180 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 280 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 320 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 640 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 175 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 250 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 300 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 45 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms,
   A-weighted, RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 25 V / ?s
* Power Consumption : 300 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 88.1 mm
* Depth : 426 mm
* Weight : 14 kg
 

VLP Series Powere Amplifier

 

Output Power: 300W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 200W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 300

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift Limiter

Dimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spaces

Weight: 33 lbs. / 15 Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; Limiter

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 300 Watt rms 
Power output stereo 8Ω:2 x 180 Watt rms 
Power output bridged 8Ω:600 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start thermal on transformer 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:6 A 
Power Consumption:1300 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:11.45 / 25.24 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:470 / 18.05 mm/inch 
Shipping Weight:13.81 / 30.44 Kg/Lbs

 

Weight4.00 kg3.50 kg10.40 kg16.00 kg15.00 kg13.81 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 3.50 kg
Weight 10.40 kg
Weight 16.00 kg
Weight 15.00 kg
Weight 13.81 kg