CROWN XLS-1002 Power Amplifier 2Χ350W/4Ω

409.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb (5 kg) Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven […]

 

Read more

  • Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
  • Higher DSP capabilities: More control; has band pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide flexibility
  • Integrated PureBand™ Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise > 97dB (at .775Vrms sensitivity, 6dB lower)
Intermodulation Distortion
Damping Factor > 200
THD
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 7.7″ (19.6 cm)
Weight 8.6 lbs (3.9 kgs)
Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN XLS-1002 Power Amplifier 2Χ350W/4Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN XLS-1002 Power Amplifier 2Χ350W/4Ω removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeBITTNER AUDIO XB800-2x400W-4Ω POWER AMPLIFIER removeYAMAHA PC-2001N Power Amplifier 2x250W removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts remove
NameCROWN XLS-1002 Power Amplifier 2Χ350W/4Ω removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeBITTNER AUDIO XB800-2x400W-4Ω POWER AMPLIFIER removeYAMAHA PC-2001N Power Amplifier 2x250W removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts remove
Image
SKUXLS-1002H06PH00016XB800H060.00037BASIC200E004734
Rating
Price 409.00 incl. GR VAT 350.00 incl. GR VAT 994.48 incl. GR VAT 1,444.00 incl. GR VAT 372.00 incl. GR VAT 389.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
  • Higher DSP capabilities: More control; has band pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide flexibility
  • Integrated PureBand™ Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise > 97dB (at .775Vrms sensitivity, 6dB lower)
Intermodulation Distortion
Damping Factor > 200
THD
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19" (48.3 cm) x 3.5" (8.9 cm) x 7.7" (19.6 cm)
Weight 8.6 lbs (3.9 kgs)
Phonic's MAX 1500 Power Amplifier provides 900 Watts of power at 8 ohms (bridge mono) or 450 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX 1500 amp is achieved via XLR or phone jack, and output is achieved either through Speakon-type connectors or traditional binding posts. The MAX 1500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 450W @ 4 Ohms stereo, 280W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting

XB Series - Intelligent Power

Power Without Compromises.
The XB is designed for paging, music and alarm signals. Versatile, dynamic
and extremely rugged according to IEC286-3. For the highest requirements
in safety and quality.
Sequential power on, alive contacts and incorporated ground fault detection-
the XB is the solution under all conditions. Without the need for additional
equipment. For uninterrupted and troublefree operation.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter,
3 ms Muting Delay
PHOENIX / Speakon
LED Indicators for POWER, SIGNAL, CLIP, PROTECT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XB 800:  2x 400 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.025%
Signal-to-Noise Ratio:  < 103 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  500 @ 4 Ohm
Cooling:  2x fan (temp. reg. variable speed)
Weight: 13 kg/(29 lbs)                                 
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 250 Watt / 8Ω RMS, 2 x 450 Watt / 4Ω RMS, 900 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 200:  2x 100 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  10 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

VLP Series Power Amplifier


Output Power:
- 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
- 300W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 260

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift

Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)

Weight: 24 lbs. / 11Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift

Weight4.00 kg16.00 kg13.00 kg12.50 kg10.00 kg11.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 16.00 kg
Weight 13.00 kg
Weight 12.50 kg
Weight 10.00 kg
Weight 11.00 kg