CROWN XLS-1502 Power Amplifier 2Χ525W/4Ω-300W/8Ω

522.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Meet the new XLS DriveCore™ 2 Series The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crownʼs patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing […]

 

Read more

Meet the new XLS DriveCore™ 2 Series

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crownʼs patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

  • Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb 
  • Higher DSP capabilities: More control; has band pass filter per channel 
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide flexibility
  • Integrated PureBand™ Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
  • With Class D circuit
  • Amp modes: 2-channel stereo, mono bridged or Y mode
  • Power rating: 2x 775 W/ 2 Ohm, 2x 525 Watt/ 4 Ohm, 2x 300 W/ 8 Ohm, bridged 1x 1550 W/ 4 Ohm, bridged 1x 1050 W/ 8 Ohm
  • 24 dB Linkwitz Riley crossover
  • Input sensitivity 1.4 or 0.775 V
  • Big front display for easy handling
  • Black out mode switches off the display automatically
  • Lock out mode avoids improper use
  • Remote power for remotely switching on/ off
  • PeakX limiter per channel
  • Quiet and temperature controlled fan
  • Rugged metal housing
  • 5 Status LEDs per channel
  • Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
  • Size: 19“/ 2 RU
  • Installation depth: 19.6 cm
  • Weight: 3.9 kg
  •  

    Weight 4.00 kg

    Reviews

    There are no reviews yet.

    Be the first to review “CROWN XLS-1502 Power Amplifier 2Χ525W/4Ω-300W/8Ω”

    Your email address will not be published. Required fields are marked *

    Quick Comparison

    CROWN XLS-1502 Power Amplifier 2Χ525W/4Ω-300W/8Ω removeINTERM L-2400 AMPLIFIER 2X750W removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeRAM AUDIO S-2000 Power Amplifier 2x1190 Watts remove
    NameCROWN XLS-1502 Power Amplifier 2Χ525W/4Ω-300W/8Ω removeINTERM L-2400 AMPLIFIER 2X750W removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeCROWN XTi-2002 2x800W 4Ω POWER AMPLIFIER removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeRAM AUDIO S-2000 Power Amplifier 2x1190 Watts remove
    Image
    SKUXLS-1502L-2400XR2000XTi-2002E15S-2000
    Rating
    Price 522.00 incl. GR VAT 1,198.00 incl. GR VAT 2,814.80 incl. GR VAT 777.00 incl. GR VAT 2,079.48 incl. GR VAT 1,254.88 incl. GR VAT
    Stock

    Available on backorder

    Available on backorder

    Available on backorder

    Only 1 left in stock (can be backordered)

    Available on backorder

    Available on backorder

    AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Description
    Content

    Meet the new XLS DriveCore™ 2 Series

    The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crownʼs patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

    • Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb 
    • Higher DSP capabilities: More control; has band pass filter per channel 
    • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
    • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
    • Set sleep mode after specified time without having to press a button
    • Security setting disables menu buttons; menu locked/unlocked by entering combination
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peakx™ Limiters provide maximum output while protecting your speakers
    • XLR, 1/4“, RCA inputs provide flexibility
    • Integrated PureBand™ Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup
  • With Class D circuit
  • Amp modes: 2-channel stereo, mono bridged or Y mode
  • Power rating: 2x 775 W/ 2 Ohm, 2x 525 Watt/ 4 Ohm, 2x 300 W/ 8 Ohm, bridged 1x 1550 W/ 4 Ohm, bridged 1x 1050 W/ 8 Ohm
  • 24 dB Linkwitz Riley crossover
  • Input sensitivity 1.4 or 0.775 V
  • Big front display for easy handling
  • Black out mode switches off the display automatically
  • Lock out mode avoids improper use
  • Remote power for remotely switching on/ off
  • PeakX limiter per channel
  • Quiet and temperature controlled fan
  • Rugged metal housing
  • 5 Status LEDs per channel
  • Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
  • Size: 19“/ 2 RU
  • Installation depth: 19.6 cm
  • Weight: 3.9 kg
  •  

    L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

    XR Series - Intelligent Power
    New Horizons.

    A lightweight with enormous power output. Combined with digital signal processing.
    That's what we call flexibility! Locally controlled or completely networked.
    No matter what the requirements are.
    The integrated powerful digital signal processor (DSP) and controller allows
    for a troublefree and easy adjustment to any acoustical environment.
    Wear-free digital potentiometers, sequential remote power on,
    alive contacts for easy supervision, computer controlled monitoring -
     its enless list of useful feature make it the right choice for any installation.
    XR - the new definition of Intelligent Power

    High Tech SMT Design
    Digital Signal Processor
    Excellent sound and superior impulse response
    Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
    PHOENIX / Speakon
    High-End Switched Power Supply with Power Factor Correction (not XR4000)
    LED Indicators for SIGNAL, CLIP, PROTECT, POWER
    Temperature controlled, variable speed low noise fans
    Digital wear-free Volume Controls (can be operated manually)
    Stereo / Bridged / Parallel Mode
    Softstart
    Sequential Remote Power On
    Alive Contact
    Paging Input
    Monitor Output
    SXL Dataport
    Perfect Weight-to-Power ratio
    3 Years Warranty

    Technical Data:
    XR 2000:  2x 1400 W @ 2 Ohm
                  2x 1000 W @ 4 Ohm
    Class:  H
    Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
    THD:  < 0.02%
    Signal-to-Noise Ratio:  < -106 dB
    Channel Seperation:  > 85 dB
    Input Sensitivity:  +6 dBu
    Input Clipping:  22 dBu
    Input Impedance:  20 kOhm
    Damping Factor:  750 to 1200 @ 4 Ohm
    Cooling:  4 Fans (temp. reg. variable speed)
    Weight:  8 kg
    Dimensions:  2 RU / 483 x 88 x 454 mm(19" x 3.5" x 17.9“)

    Crown XTi2002 Specifications: * Output Power 2 ohms Stereo (per ch): 1000W * Output Power 4 ohms Stereo (per ch): 800W * Output Power 8 ohms Stereo (per ch): 475W * Output Power 8 ohms Bridged-Mono: 1600W * Output Power 4 ohms Bridged-Mono: 2000W * Sensitivity (for full rated power at 4 ohms): 1.4 Vrms * Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB * Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) * Total Harmonic Distortion (THD): * Damping Factor 20 Hz to 1 kHz: > 500 * Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db * Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced * Maximum Input Signal: +22 dBu typical * Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) * Level Control: Two front-panel rotary level controls, one for each channel * Power Switch Control: On/Off switch applies AC power to the amplifier * Sel/Prev/Next Buttons Controls: Three buttons near the LCD screen that are used to access menu items and front panel lockout * LCD Screen: Backlit liquid crystal display that shows preset and processing status * Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). * –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip. * –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip. * Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. * Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion * Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions * Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power * Input Connectors: XLR, one per channel * Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. * Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). * HiQnet™ USB Connector: Type B, connects to HiQnet™ network. * Chassis: Steel * Front Panel: Cast-aluminum * Cooling: Proportional speed fan with front-to-rear airflow. * Dimensions: 19" (W) x 3.5" (H) x 12.25" (D) * Net Weight: 18.5 lbs (8.4kg) * Shipping Weight: 21.5 lbs (9.8kg)

    Number of Channels: 2

    Output Power: (per channel)

    8 ohms     450W
    4 ohms  850W
    2 ohms 1550W



    Output Power: (bridged)

    8 ohms 1700W
    4 ohms 3100W


    THD%: (@1dB below max output)

    @ 1kHz

    The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment.

    In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.

    • Ultra-compact and lightweight 2-U high
    • Laser cut aluminum front panels with integrated carrying handles
    • Neutrik® XLR input connectors, input and signal link in 2 channel models
    • Input Link switch: allow daisy-chaining of the input signal
    • Neutrik® Speakon® output connectors
    • Detented sealed potentiometers for easy recall of volume settings
    • ICL™, PMS™, Hi-temp, Signal indicators per channel
    • Power on and Stand-by leds
    • Highly versatile with multiple configuration and additional module options
    • Full PC control via EtheRAM (with EtheRAM Control module)
    • Switchable ICL™ clip-limiters per channel
    • Switchable (30-50 Hz) sub-sonic highpass filter per channel
    • Three-position gain selector (26, 32 or 38 dB)
    • Dual or bridge mode selector
    • Twin temperature controlled, back to front cooling fans
    • Oversized power components (high SOA reserve specification)
    Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility.

    Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics:
    • 2-way stereo crossover (dual mono or single bridged sub output)
    • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz)
    • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB)
    • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB)


    DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics:
    • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable.
    • 24 bits/192 kHz 256x Oversampling Converters.
    • Output Delay: 0 to 7.1 meters (20.69ms) per channel.
    • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel.
    • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB).
    • Gain, Mute and Phase inversion per channel.
    • RMS Power and Peak Voltage output limiter per channel.
    • Real Time operation from USB or front panel configuration.


    Standard Signal Inputs Module
    EtheRAM Control Module
    Ethernet Audio Transport (Coming soon)
    Analog Processor Module
    DSP44_S Module
    EtheRAM Control Module
    AES/EBU Digital Input (Coming soon)

    OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
    1kHz, 1.0% THD
    2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
    4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
    8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
    Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
    Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
    P. N. 12dB C.F.
    2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
    4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W

    Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz
    Phase Response (@1W 20Hz-20kHz): ±15deg
    Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB
    Voltage Gain (selectable): 26/32/38 dB
    Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V
    3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V
    Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB
    3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB
    Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A
    3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A
    Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches
    Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs

    Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

    Weight4.00 kg15.60 kg9.00 kg9.80 kg12.00 kg8.00 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 4.00 kg
    Weight 15.60 kg
    Weight 9.00 kg
    Weight 9.80 kg
    Weight 12.00 kg
    Weight 8.00 kg