CROWN XLS-2002 Power amplifier 2Χ650W/4Ω-2X375W/8Ω

602.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Meet the new XLS DriveCore™ 2 Series The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crownʼs patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing […]

 

Read more

Meet the new XLS DriveCore™ 2 Series

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crownʼs patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

  • Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb 
  • Higher DSP capabilities: More control; has band pass filter per channel 
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide flexibility
  • Integrated PureBand™ Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise >103dB (at .775Vrms, 6dB lower)
Intermodulation Distortion
Damping Factor > 200
THD
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 10.7″ (21.2 cm)
Weight 10.8 lbs (4.9 kgs)

 

  • With Class D circuit
  • Amp modes: 2-channel stereo, mono bridged or Y mode
  • Power rating: 2x 1050 Watt/ 2 Ohm, 2x 650 Watt/ 4 Ohm, 2x 375 Watt/ 8 Ohm, bridged 1x 2100 Watt/ 4 Ohm, bridged 1x 1300 Watt/ 8 Ohm
  • 24 dB Linkwitz Riley crossover
  • Input sensitivity 1.4 or 0.775 V
  • Big front display for easy handling
  • Black out mode switches off the display automatically
  • Lock out mode avoids improper use
  • Remote power for remotely switching on/ off
  • PeakX limiter per channel
  • Quiet and temperature controlled fan
  • Rugged metal housing
  • 5 Status LEDs per channel
  • Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
  • Size: 19“/ 2 RU
  • Installation depth: 27.2 cm
  • Weight: 4.9 kg
  •  

     

     

    Weight 5.00 kg

    Reviews

    There are no reviews yet.

    Be the first to review “CROWN XLS-2002 Power amplifier 2Χ650W/4Ω-2X375W/8Ω”

    Your email address will not be published. Required fields are marked *

    Quick Comparison

    CROWN XLS-2002 Power amplifier 2Χ650W/4Ω-2X375W/8Ω removeRAM AUDIO S-1500 Power Amplifier 2x880 Watts removeQSC PL-325 POWER AMPLIFIER 2x850W RMS @4Ω, 2x1250W RMS @2Ω removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms remove
    NameCROWN XLS-2002 Power amplifier 2Χ650W/4Ω-2X375W/8Ω removeRAM AUDIO S-1500 Power Amplifier 2x880 Watts removeQSC PL-325 POWER AMPLIFIER 2x850W RMS @4Ω, 2x1250W RMS @2Ω removeRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms remove
    Image
    SKUXLS-2002S-1500PL-325HC1600E15LDDP1600
    Rating
    Price 602.00 incl. GR VAT 1,160.64 incl. GR VAT1,684.13 incl. GR VAT 1,004.39 incl. GR VAT 2,079.48 incl. GR VAT 750.00 incl. GR VAT
    Stock

    In stock

    Available on backorder

    In stock

    Available on backorder

    Available on backorder

    In stock

    AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stock
    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Description
    Content

    Meet the new XLS DriveCore™ 2 Series

    The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crownʼs patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

    • Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb 
    • Higher DSP capabilities: More control; has band pass filter per channel 
    • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
    • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
    • Set sleep mode after specified time without having to press a button
    • Security setting disables menu buttons; menu locked/unlocked by entering combination
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peakx™ Limiters provide maximum output while protecting your speakers
    • XLR, 1/4“, RCA inputs provide flexibility
    • Integrated PureBand™ Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup
    Sensitivity 1.4Vrms
    Frequency Response +0dB, -1dB
    Signal to Noise >103dB (at .775Vrms, 6dB lower)
    Intermodulation Distortion
    Damping Factor > 200
    THD
    Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
    Dimensions 19" (48.3 cm) x 3.5" (8.9 cm) x 10.7" (21.2 cm)
    Weight 10.8 lbs (4.9 kgs)
     
  • With Class D circuit
  • Amp modes: 2-channel stereo, mono bridged or Y mode
  • Power rating: 2x 1050 Watt/ 2 Ohm, 2x 650 Watt/ 4 Ohm, 2x 375 Watt/ 8 Ohm, bridged 1x 2100 Watt/ 4 Ohm, bridged 1x 1300 Watt/ 8 Ohm
  • 24 dB Linkwitz Riley crossover
  • Input sensitivity 1.4 or 0.775 V
  • Big front display for easy handling
  • Black out mode switches off the display automatically
  • Lock out mode avoids improper use
  • Remote power for remotely switching on/ off
  • PeakX limiter per channel
  • Quiet and temperature controlled fan
  • Rugged metal housing
  • 5 Status LEDs per channel
  • Connectors: XLR, jack and RCA input, 2x speaker twist and binding post outputs
  • Size: 19“/ 2 RU
  • Installation depth: 27.2 cm
  • Weight: 4.9 kg
  •    

     

    The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon) back_s_l
    OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
    1kHz, 1.0% THD
    2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
    4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
    8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
    Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
    Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
    P. N. 12dB C.F.
    2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
    4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
    Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

    Power Rating    

    Stereo Mode:
    8Ω EIA 1 kHz 1% THD - 500W
    4Ω EIA 1 kHz 1% THD - 850W
    2Ω EIA 1 kHz 1% THD - 1250W

    Bridged Mono:
    8Ω EIA 1 kHz 1% THD - 1700W
    4Ω EIA 1 kHz 1% THD - 2500W

    Damping Factor     Not Specified By Manufacturer
    Input Sensitivity     26dB Setting - 3.28V
    32dB Setting - 1.60V
    Input Impedance     > 10kΩ balanced, or unbalanced
    Gain     34.5dB
    Frequency Response     20Hz to 20kHz, +/- 0.2dB
    Signal-to-Noise Ratio     -106dB
    Total Harmonic Distortion (THD)     0.02% @ 2Ω
    0.005-0.01% @ 4Ω
    0.002-0.01% @ 8Ω
    Input Connections     Input: XLR Male, XLR Female and 3-pin detachable terminal blocks (1 each per channel)
    DataPort: HD-15, input signal in parallel with XLR input connectors
    Output Connectors     Output: Neutrik Speakon (ch 1 wired to both channels) and 5-way binding posts
    Controls Front Panel     AC Power Switch
    Gain Controls, 21 detents, 1 dB steps (each channel)
    Controls (Rear)     Input Mode: Bridge (Yellow), Stereo (Green), or Parallel (Orange)
    Gain / Sensitivity: 26dB (Orange), 32dB (Green), or 1.2V (Yellow)
    High Pass (each channel): 3Hz (Off), 30Hz (Yellow), or 50Hz (Orange)
    Clip Limiter (each channel): Off, On (Yellow)
    Indicators     Clip Limiter (each channel): Off, On (Yellow)
    Camera Resolution     Flow-thru air path and solid aluminum heat sinks
    Power Consumption     120V 50/60Hz - 8.5A
    230V 50Hz - 7.5A
    Power Requirements     Not Specified By Manufacturer
    Dimensions (WxHxD)     19 x 3.5 x 15.63" (48.3 x 8.9 x 39.7cm)
    Weight     33.5 lbs (15.2kg)
    Specialties     Parallel Dataport, XLR/M and XLR/F connectors for simple loop-through connectivity

    This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%.

    A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.  The integral soft clip limiter protects against damage to the connected loudspeakers.  The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

     

    AMPLIFIER SPECIFICATIONS
    Power output stereo 2Ω:2 x 800 Watt rms 
    Power output stereo 4Ω:2 x 650 Watt rms 
    Power output stereo 8Ω:2 x 350 Watt rms 
    Power output bridged 4Ω:1600 Watt rms 
    Power output bridged 8Ω:1300 Watt rms 
    Frequency Response:20 Hz ÷ 20 kHz  
    Signal/noise rate:> 103 dB 
    Crosstalk:> 70 dB 
    Distortion (THD+N): 
    Intermodulation: 
    Damping factor:200:1 (8 Ω) 
    Slew rate:50 V/μS 
    INPUT SECTION
    Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
    Input sensitivity:0 / 0.775 dBm/V RMS 
    Input impedance: 20.000 kΩ 
    Controls:Volume control for each channel 
    OUTPUT SECTION
    Output connector:2 x Neutrik Speakon 4 ways 
    SYSTEM PARAMETERS
    Cooling:Two-speed fan 
    Protections:Temperature, DC, RFI short circuit, Soft-Start, Thermal on transformer 
    POWER REQUIREMENT
    Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
    Max.current:7.5 A 
    Power Consumption:2700 W 
    PHYSICAL SPECIFICATIONS
    Height:88 / 3.46 mm/inch 
    Width:483 / 19.01 mm/inch 
    Depth:455 / 17.91 mm/inch 
    Net Weight:19.5 / 42.98 Kg/Lbs 
    SHIPPING INFORMATION
    Package height:150 / 5.9 mm/inch 
    Package width:555 / 21.85 mm/inch 
    Package depth:525 / 20.66 mm/inch 
    Shipping Weight:20 / 44.09 Kg/Lbs

     

    Number of Channels: 2

    Output Power: (per channel)

    8 ohms     450W
    4 ohms  850W
    2 ohms 1550W



    Output Power: (bridged)

    8 ohms 1700W
    4 ohms 3100W


    THD%: (@1dB below max output)

    @ 1kHz

    The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio. Product type Power Amplifiers
    Type PA Power Amplifiers
    Rated ouput power (1kHz @ 2 Ohms) 2 x 800 W
    Rated ouput power (1kHz @ 4 Ohms) 2 x 650 W
    Rated ouput power (1kHz @ 8 Ohms) 2 x 450 W
    Rated ouput power (1kHz @ 4 Ohms, bridged) 1600 W
    Rated ouput power (1kHz @ 8 Ohms, bridged) 1300 W
    Output circuitry Class H
    Frequency response 20 - 20000 Hz
    THD < 0.1 %
    Signal-to-noise ratio 106 dB
    Damping factor > 400
    Crosstalk >80 dB
    Gain 39 dB
    Input sensitivity 0.775 V
    Protection circuits clip limiter , DC protection , short circuit , thermal overload
    Controls 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
    Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
    Loudspeaker outputs 2
    Speaker output connections Speakon compatible , Terminal posts
    Cooling highly efficient, automatic
    Operating voltage transformer
    Operating voltage 230 V AC / 50-60 Hz
    Weight 15,9 kg
    Features Volex mains socket
    Weight5.00 kg8.00 kg10.00 kg20.00 kg12.00 kg15.90 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 5.00 kg
    Weight 8.00 kg
    Weight 10.00 kg
    Weight 20.00 kg
    Weight 12.00 kg
    Weight 15.90 kg