CROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack

349.93 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Crown XLI 800 The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the […]

 

Read more

Crown XLI 800

The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 800 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).

Crown XLI 800:

  • Reasonably priced, robust and powerful power amplifier
  • Robust and analogue circuit
  • LED display for each channel for signal, clip and error
  • Stereo, bridge and parallel modes
  • Conventional power supply
  • Performance: 2 x 200 Watts / 8 Ohms, 2 x 300 Watts / 4 Ohms
  • Inputs: Cinch, XLR
  • Outputs: 2 x speakon, spring clip
  • Robust 19 inch housing
  • Height: 2 U

Specifications

XLi800 XLi1500 XLi2500 XLi3500
Channels 2 2 2 2
Sensitivity (full rated power at 8 ohms) 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) > 100 dB > 100 dB > 100 dB > 100 dB
Total Harmonic Distortion (THD) (20Hz – 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) = / = / = / = /
Frequency Response (at 1W, 20Hz – 20kHz) 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB
Crosstalk (below rated power) at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB
at 20kHz: – 59 dB at 20kHz: – 59 dB at 20kHz: – 59 dB at 20kHz: – 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms) > 200 > 200 > 200 > 200
AC Line Voltage and Frequency Configurations (± 10%) 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz
220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz
230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz
Dimensions (H x W x D) 3.5″ x 19″ x 12.4“ 3.5″ x 19″ x 12.4“ 3.5″ x 19″ x 12.4“ 3.5″ x 19″ x 14.4“
 (89 x 482 x 315mm)  (89 x 482 x 315mm)  (89 x 482 x 315mm) (89 x 482 x 366mm)
Net Weight 25.1 lb (11.4 kg) 28.0 lb (12.7 kg) 29.7 lb (13.5 kg) 43.0 lb (19.5 kg)
Net Shipping Weight 29.5 lb (13.4 kg) 32.4 lb (14.7 kg) 34.2 lb (15.5 kg) 47.4 lb (21.5 kg)
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack removeBITTNER AUDIO XB400-2x200W-4Ω POWER AMPLIFIER removeINTERM R-500 PLUS AMPLIFIER 2X250W removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeINTERM R-300 PLUS Power Amplifier removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER remove
NameCROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack removeBITTNER AUDIO XB400-2x200W-4Ω POWER AMPLIFIER removeINTERM R-500 PLUS AMPLIFIER 2X250W removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeINTERM R-300 PLUS Power Amplifier removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER remove
Image
SKUXLI-800XB400R-500 PLUSLDDP600R-300 PLUSBASIC200
Rating
Price 349.93 incl. GR VAT 744.00 incl. GR VAT 761.00 incl. GR VAT 450.00 incl. GR VAT 571.00 incl. GR VAT 372.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

In stock

In stock

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderIn stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentCrown XLI 800 The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 800 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel). Crown XLI 800:
  • Reasonably priced, robust and powerful power amplifier
  • Robust and analogue circuit
  • LED display for each channel for signal, clip and error
  • Stereo, bridge and parallel modes
  • Conventional power supply
  • Performance: 2 x 200 Watts / 8 Ohms, 2 x 300 Watts / 4 Ohms
  • Inputs: Cinch, XLR
  • Outputs: 2 x speakon, spring clip
  • Robust 19 inch housing
  • Height: 2 U
Specifications
XLi800 XLi1500 XLi2500 XLi3500
Channels 2 2 2 2
Sensitivity (full rated power at 8 ohms) 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) > 100 dB > 100 dB > 100 dB > 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) = / = / = / = /
Frequency Response (at 1W, 20Hz - 20kHz) 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB
Crosstalk (below rated power) at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB
at 20kHz: - 59 dB at 20kHz: - 59 dB at 20kHz: - 59 dB at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms) > 200 > 200 > 200 > 200
AC Line Voltage and Frequency Configurations (± 10%) 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz
220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz
230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz
Dimensions (H x W x D) 3.5" x 19" x 12.4“ 3.5" x 19" x 12.4“ 3.5" x 19" x 12.4“ 3.5" x 19" x 14.4“
 (89 x 482 x 315mm)  (89 x 482 x 315mm)  (89 x 482 x 315mm) (89 x 482 x 366mm)
Net Weight 25.1 lb (11.4 kg) 28.0 lb (12.7 kg) 29.7 lb (13.5 kg) 43.0 lb (19.5 kg)
Net Shipping Weight 29.5 lb (13.4 kg) 32.4 lb (14.7 kg) 34.2 lb (15.5 kg) 47.4 lb (21.5 kg)

XB Series - Intelligent Power

Power Without Compromises.
The XB is designed for paging, music and alarm signals. Versatile, dynamic
and extremely rugged according to IEC286-3. For the highest requirements
in safety and quality.
Sequential power on, alive contacts and incorporated ground fault detection-
the XB is the solution under all conditions. Without the need for additional
equipment. For uninterrupted and troublefree operation.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter,
3 ms Muting Delay
PHOENIX / Speakon
LED Indicators for POWER, SIGNAL, CLIP, PROTECT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XB 400:  2x 200 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.025%
Signal-to-Noise Ratio:  < 103 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  500 @ 4 Ohm
Cooling:  2x fan (temp. reg. variable speed)
Weight:12 kg /(26 lbs)                                    
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

Power Output Level R-300 PLUS

STEREO
8ohm(T.H.D 0.05%)  170W+170W
4ohm(T.H.D 0.05%)  250W+250W

BRIDGED MONO
8ohm(T.H.D 0.05%)  460W
8ohm(T.H.D 0.5%)    500W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10k&ohm;@0.775V Inputs

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

Reference Quality Power Amplifier [R-300 Plus]

  • Controls :
    Front : Power on/off switch, attenuator, LED indicator
    Rear : Mode seletor switch, Stereo/bridged mono switch
  • Connectors :
    Input : 1 XLR, 1/4" balanced per channel
    Output : 5-way binding post and SpeakonTM per channel
  • Indicators :
    Power : Green, Protection : Red, Clip : Red, Signal : Green
  • Power Source : 100-120VAC or 220-240VAC; 50/60Hz
    (supplied AC mains transformer depends on country requirements)
  • Power Consumption : 250W(2.4A)
  • Weight : 8.4kg/18.5lb
  • Dimensions (WxHxD) : 482x88x317mm/19x3.5x12.5in

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 200:  2x 100 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  10 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

Weight5.00 kg12.00 kg10.40 kg13.00 kg8.40 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 12.00 kg
Weight 10.40 kg
Weight 13.00 kg
Weight 8.40 kg
Weight 10.00 kg