CROWN XTi-4002 2x1200W-4Ω POWER AMPLIFIER

1,186.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Crown XTi 4002 Features at a Glance: * Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms * Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms * Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release […]

 

Read more

Crown XTi 4002 Features at a Glance:

* Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms
* Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms
* Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
* Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
* 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
* New system monitoring provides software visibility of AC line voltage and power supply temperature
* Integrated cast-aluminum handles for easy handling and enhanced durability
* Locking power cord clip provides a secure connection between the amplifier and power cord
* Updated HiQnet Band Manager and System Architect control software
* Increased number of presets to a total of 30; 29 of which are user definable

Weight 11.00 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN XTi-4002 2x1200W-4Ω POWER AMPLIFIER”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN XTi-4002 2x1200W-4Ω POWER AMPLIFIER removeCROWN XLi-3500 Power Amplifier 2x1350W/4Ω-1000W/8Ω-1Χ2700W bridge 8Ω 2U Rack removeYAMAHA PX-10 Stereo Power Amplifier 2x1200 removeRCF HC 3200: 3200 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeINTER-M DPA-1200S HI END AMPLIFIER 1Χ1200W/100V PRIORITY IN. removeCrown DSI-4000 2x1200W-4Ω Power Amplifier remove
NameCROWN XTi-4002 2x1200W-4Ω POWER AMPLIFIER removeCROWN XLi-3500 Power Amplifier 2x1350W/4Ω-1000W/8Ω-1Χ2700W bridge 8Ω 2U Rack removeYAMAHA PX-10 Stereo Power Amplifier 2x1200 removeRCF HC 3200: 3200 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeINTER-M DPA-1200S HI END AMPLIFIER 1Χ1200W/100V PRIORITY IN. removeCrown DSI-4000 2x1200W-4Ω Power Amplifier remove
Image
SKUXTI-4002XLI-3500H060.00057HC3200DPA-1200SDSI-4000
Rating
Price 1,186.00 incl. GR VAT 1,055.50 incl. GR VAT 1,350.00 incl. GR VAT 1,460.09 incl. GR VAT 1,230.00 incl. GR VAT 1,688.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentCrown XTi 4002 Features at a Glance: * Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms * Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms * Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release * Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning * 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application * New system monitoring provides software visibility of AC line voltage and power supply temperature * Integrated cast-aluminum handles for easy handling and enhanced durability * Locking power cord clip provides a secure connection between the amplifier and power cord * Updated HiQnet Band Manager and System Architect control software * Increased number of presets to a total of 30; 29 of which are user definable2x1350W/4Ω-1000W/8Ω-1Χ2700W Crown XLI 3500 The Crown XLI 3500 is a reasonably priced, but robust and powerfull power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 1800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 3500 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it features three different, selectable modes (stereo, bridge and parallel). Crown XLI 3500:
  • Reasonably priced, robust and powerfull power amplifier
  • Robust and analog circuit
  • LED display for each channel for signal, clip and error
  • Stereo, bridge and parallel modes
  • Conventional power supply
  • Performance: 2 x 1200 W / 8 Ohm, 2 x 1800 W / 4 Ohm
  • Inputs: Cinch, XLR
  • Outputs: 2 x speakon, spring clip
  • Robust 19 inch housing
  • Hight: 2 hight units
Specifications
XLi800 XLi1500 XLi2500 XLi3500
Channels 2 2 2 2
Sensitivity (full rated power at 8 ohms) 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) > 100 dB > 100 dB > 100 dB > 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) = / = / = / = /
Frequency Response (at 1W, 20Hz - 20kHz) 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB
Crosstalk (below rated power) at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB
at 20kHz: - 59 dB at 20kHz: - 59 dB at 20kHz: - 59 dB at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms) > 200 > 200 > 200 > 200
AC Line Voltage and Frequency Configurations (± 10%) 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz
220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz
230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz
Dimensions (H x W x D) 3.5" x 19" x 12.4“ 3.5" x 19" x 12.4“ 3.5" x 19" x 12.4“ 3.5" x 19" x 14.4“
 (89 x 482 x 315mm)  (89 x 482 x 315mm)  (89 x 482 x 315mm) (89 x 482 x 366mm)
Net Weight 25.1 lb (11.4 kg) 28.0 lb (12.7 kg) 29.7 lb (13.5 kg) 43.0 lb (19.5 kg)
Net Shipping Weight 29.5 lb (13.4 kg) 32.4 lb (14.7 kg) 34.2 lb (15.5 kg) 47.4 lb (21.5 kg)
 

Product Highlights

  • 1000W per Channel at 8 Ohms
  • Efficient Class-D Amplifier
  • Custom LSI Chip with PLL Technology
  • Digital Routing of Inputs & Outputs
  • XLR, 1/4“, SpeakON & Binding Post
  • PEQ, Crossover, Filters, Delay
  • D-Contour Multi-Band Dynamic Processing

This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%.
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.
The integral soft clip limiter protects against damage to the connected loudspeakers.
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 1600 Watt rms 
Power output stereo 4Ω:2 x 1100 Watt rms 
Power output stereo 8Ω:2 x 700 Watt rms 
Power output bridged 4Ω:3200 Watt rms 
Power output bridged 8Ω:2200 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 102 dB 
Crosstalk:> 65 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:400:1 (8 W) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Thermal, temperature, direct current, short circuit, RFI 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:16 A 
Power Consumption:6500 W 
PHYSICAL SPECIFICATIONS
Height:132 / 5.19 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:29.5 / 65.03 Kg/Lbs 
SHIPPING INFORMATION
Package height:200 / 7.87 mm/inch 
Package width:575 / 22.63 mm/inch 
Package depth:555 / 21.85 mm/inch 
Shipping Weight:32.5 / 71.64 Kg/Lbs

 

Single digital (Class D) amplifier with switching power supply 1200W/70V/100V. Protection against overheating, overcurrent and short circuit output. Features & priority entry program (program override) for message playback emergency. Highpass filter OFF/200Hz/400Hz. Remote control function ON / OFF. Power Supply DC 24V, AC 220 ~ 240V 50/60Hz.

Crown DSi 4000 2x1200W-4Ω Power Amplifier

The Crown? DSi 4000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply. A rear-panel HD-15 connector shall
provide input/output connectivity between the DSi amplifi er and the DSi-8M
System Monitor.
The outputs shall be usable as stereo or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker.
HiQnet USB Connector: Type B, connects to a HiQnet network.
HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Stereo (per channel): 1,600W with 1% THD, 4 ohm
Stereo (per channel): 1,200W with 0.5% THD, 8 ohm Stereo (per channel):
650W with 0.5% THD, 4 ohm Bridge-Mono: 3,200W with 1% THD, 8 ohm
Bridge-Mono: 2,400W with 0.5% THD.
Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity at 8 ohm rated output: 3.61V.
Sensitivity at 4 ohm rated output: 3.47V.
Sensitivity at 2 ohm rated output: 2.84V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 8.0A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave, Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB bandpass
gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Delay: Up to 50 msec total delay per channel.
Presets: 20 presets. One is ?DSP OFF.? Fifteen are factory-set for JBL Cinema
systems. Four are user-defi nable.
Protection shall include the following:
DSi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airflow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg)
The amplifier shall be designated the Crown DSi 4000.

Weight11.00 kg10.00 kg7.40 kg32.50 kg3.00 kg9.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Weight 10.00 kg
Weight 7.40 kg
Weight 32.50 kg
Weight 3.00 kg
Weight 9.00 kg