Crown XTi 4002 Features at a Glance: * Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms * Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms * Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release […]
* Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms
* Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms
* Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
* Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
* 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
* New system monitoring provides software visibility of AC line voltage and power supply temperature
* Integrated cast-aluminum handles for easy handling and enhanced durability
* Locking power cord clip provides a secure connection between the amplifier and power cord
* Updated HiQnet Band Manager and System Architect control software
* Increased number of presets to a total of 30; 29 of which are user definable
Weight
11.00 kg
Reviews
There are no reviews yet.
Be the first to review “CROWN XTi-4002 2x1200W-4Ω POWER AMPLIFIER” Cancel reply
Crown XTi 4002 Features at a Glance:
* Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms
* Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms
* Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
* Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
* 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
* New system monitoring provides software visibility of AC line voltage and power supply temperature
* Integrated cast-aluminum handles for easy handling and enhanced durability
* Locking power cord clip provides a secure connection between the amplifier and power cord
* Updated HiQnet Band Manager and System Architect control software
* Increased number of presets to a total of 30; 29 of which are user definable
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
Switchable Limiter
AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:
2 x 1400 Watt rms
Power output stereo 4Ω:
2 x 1100 Watt rms
Power output stereo 8Ω:
2 x 700 Watt rms
Power output bridged 4Ω:
2800 Watt rms
Power output bridged 8Ω:
2200 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
106 dB
Damping factor:
> 300
Slew rate:
50 V/μS
INPUT SECTION
Input connector:
xlr
Input sensitivity:
1.4 dBm/V RMS
Input impedance:
20 kΩ (balanced), 10 kΩ (unbalanced) kΩ
OUTPUT SECTION
Output connector:
Speakon
SYSTEM PARAMETERS
Cooling:
Forced
Voltage gain:
32 – 26 dB
Amplifier class:
H
POWER REQUIREMENT
Operating voltage:
220 ÷ 240 V (50 / 60 Hz) V ~ Hz
PHYSICAL SPECIFICATIONS
Height:
88/3.4 mm/inch
Width:
482/18.9 mm/inch
Depth:
420/16.5 mm/inch
Net Weight:
19/41,8 Kg/Lbs
Amplifier Gain 41.5 dB, 35 dB, 32 dB (switchable)
CAN Bus Interface Optional with RCM-26
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 2000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 1450 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 850 Watts
Continuous Rated Power
(20-20 kHz, THD
The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)
Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
, weighting just 14 kg.<br>
It comes with a ʽPFCʼ (ʽPower factor correctionʼ) switched mode power supply which ensures that a predominantly<br>
resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the DPS 3000 can withstand the hardest heat conditions ensuring great reliability.
</p>
<table><tbody><tr><th>AMPLIFIER SPECIFICATIONS</th> </tr><tr><td>Power output stereo 2Ω:</td><td>2 x 1700 Watt rms</td><td> </td></tr><tr><td>Power output stereo 4Ω:</td><td>2 x 1200 Watt rms</td><td> </td></tr><tr><td>Power output stereo 8Ω:</td><td>2 x 800 Watt rms</td><td> </td></tr><tr><td>Power output bridged 4Ω:</td><td>3400 Watt rms</td><td> </td></tr><tr><td>Power output bridged 8Ω:</td><td>2400 Watt rms</td><td> </td></tr><tr><td>Frequency Response:</td><td>20 Hz ÷ 20 kHz </td><td> </td></tr><tr><td>Signal/noise rate:</td><td>108 dB</td><td> </td></tr><tr><td>Damping factor:</td><td>> 1000</td><td> </td></tr><tr><td>Slew rate:</td><td>55 V/μS</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>INPUT SECTION</th> </tr><tr><td>Input connector:</td><td>xlr</td><td> </td></tr><tr><td>Input sensitivity:</td><td>1.4 dBm/V RMS</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>OUTPUT SECTION</th> </tr><tr><td>Output connector:</td><td>Speakon</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>SYSTEM PARAMETERS</th> </tr><tr><td>Cooling:</td><td>Temperature-controlled fan</td><td> </td></tr><tr><td>Protections:</td><td>Temp., DC, RFI, short-circuit</td><td> </td></tr><tr><td>Voltage gain:</td><td>32 – 26 dB</td><td> </td></tr><tr><td>Amplifier class:</td><td>HD</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>POWER REQUIREMENT</th> </tr><tr><td>Operating voltage:</td><td>90 ÷ 245 V (50 / 60 Hz) V ~ Hz </td><td> </td></tr><tr><td>Power Consumption:</td><td>SMPS W</td><td> </td></tr><tr><td>Power factor (cos φ):</td><td>0.95 from 200 W to full power</td><td> </td></tr></tbody></table>
<table><tbody><tr><th>PHYSICAL SPECIFICATIONS </th> </tr><tr><td>Height:</td><td>88/3.4 mm/inch</td><td> </td></tr><tr><td>Width:</td><td>482/18,9 mm/inch</td><td> </td></tr><tr><td>Depth:</td><td>420/16.5 mm/inch</td><td> </td></tr><tr><td>Net Weight:</td><td>14/30.8 Kg/Lbs</td></tr></tbody></table>
<p>
</p></td><td>
<p>
HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).<br>
<br>
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.<br>
A forced air cooling system maintains a low operating temperature.
</p>
<table><tbody><tr><th>Features</th> </tr><tr><td>Fast response and low distortion</td></tr><tr><td>Easy to configure in stereo / mono / bridge modes</td></tr><tr><td>Extensive protective circuits ensure high reliability and operating safety</td></tr><tr><td>Front panel signal / clip / protect LED indicators</td></tr><tr><td>Minimum load impedance (stereo / mono): 2 Ohm</td></tr><tr><td>XLR input connectors</td></tr><tr><td>SPEAKON output connectors</td></tr><tr><td>2 unit 19 "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.