CROWN CT-4150 POWER POWER AMPLIFIER 4Χ150W/8OHM

1,319.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Model    CT475 Product Type    Amplifier Channels    4 Sensitivity    1.4V Rated Power Output    75W per Channel into 8 ohms Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB Total Harmonic Distortion (THD) (full rated power, 20Hz – 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± […]

 

Read more

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz – 20kHz)   
Intermodular Distortion (from 0dB down to -40dB)   
Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75″ x 19″ x 14.25“
Weight    10 lbs (4.5 kg)
Shipping Weight    15 lbs (6.8 kg)
      Top

Weight 6.80 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN CT-4150 POWER POWER AMPLIFIER 4Χ150W/8OHM”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN CT-4150 POWER POWER AMPLIFIER 4Χ150W/8OHM removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeYAMAHA XM-4080 Power Amplifier 4x80W removeRAM AUDIO S-3004 Power Amplifier 4x700 Watts removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM removeLAB GRUPPEN FP 10000Q BP POWER AMLIFIER 4Χ2100 Watt/4Ohm remove
NameCROWN CT-4150 POWER POWER AMPLIFIER 4Χ150W/8OHM removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeYAMAHA XM-4080 Power Amplifier 4x80W removeRAM AUDIO S-3004 Power Amplifier 4x700 Watts removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM removeLAB GRUPPEN FP 10000Q BP POWER AMLIFIER 4Χ2100 Watt/4Ohm remove
Image
SKUCT-4150LDDP4950H060.00045S-3004QD-4960E008135
Rating
Price 1,319.00 incl. GR VAT 803.51 incl. GR VAT 957.73 incl. GR VAT 1,599.59 incl. GR VAT 1,075.00 incl. GR VAT 5,200.00 incl. GR VAT
Stock

Available on backorder

Only 5 left in stock (can be backordered)

Only 5 left in stock

Available on backorder

Only 1 left in stock

Available on backorder

AvailabilityAvailable on backorderOnly 5 left in stock (can be backordered)Only 5 left in stockAvailable on backorderOnly 1 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)
Shipping Weight    15 lbs (6.8 kg)
      Top

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W

Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

Total Harmonic Distortion (THD)
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>70 dB

Gain
38 dB

Input sensitivity
0.775 V

Protection circuits
DC protection , short circuit , thermal overload

Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
4

Speaker output connections
Speakon compatible

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
19,6 kg
 

Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 8Ω 80W x 4
Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 4Ω 115W x 4
Sensitivity, RL=8. Att.max +4dB
S/N Ratio, 20Hz-20kHz (DIN AUDIO) 100dB
Idle Power Consumption 40W
1/8 Power Consumption (4Ω) 500W
Power Bandwidth, (Half power THD+N=0.5%) 10Hz – 40kHz
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response, f=20Hz-20kHz -0.5dB, 0dB, 0dB
Residual Noise, 20Hz-20kHz(DIN AUDIO) -70dB
Voltage Gain, 8Ω, f=1kHz 100
Sensitivity, ATT. max 26dB
Maximum Input Voltage 22dB
Input Impedance 30kΩ (balance) 15kΩ (unbalance)
Controls, Front panel POWER switch (push on/push off), attenuator (31position) x 4
Controls, Rear panel MODE switch (STEREO/BRIDGE/PARALLEL) x 2 HPF switch (OFF/20Hz/55Hz 12dB/oct) x 2
Connectors, Output 5–way binding post/ch
Connectors, DATA PORT D-sub15P, Monitor:Output Level/ch,Active/ch, Model Detect Control:Mute/ch
Connectors, Power AC inlet x 1
Indicators, POWER x 1 (Green)
Indicators, SIGNAL x 4(Green)
Indicators, CLIP/LIMIT x 4 (Red)
Indicators, PROTECT/MUTE x 4 (Red)
Load Protection POWER switch on/off mute, DC-fault output relay off
Power Requirements UC: 120V / 60Hz,
Weight 10kg (22 lbs.)
Dimensions (W x H x D) 480 x 88 x 412.2 mm (18-7/8" x 3-7/16" x 16-1/4“) 

  The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon)
OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™
Power Output Level QD4960 : 8ohm (Quad Ch)        170W 4ohm (Quad Ch)        240W 8ohm bridged mono   480W Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz T.H.D. (f=20Hz~20kHz, Half Power) 0.03% Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel Separation (8ohm, 1kHz)  80dB Voltage Gain (4ohm)  26dB 29dB 32dB Power Source  100-120VAC or 220-240VAC ; 50/60Hz (supplied AC mains transformer depends on country requirements) Power Consumption  300W 420W 770W Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb Dimensions  482(W) x 88(H) x 369(D) mm /19(W) x 3.5(H) x 14.5(D) inPOWER AMPLIFIER 4 X 2100 WATT / 4Ω Very high power  and  channel density  –   •   The  four-channel  FP 10000Q delivers a  total of 10000 W  (4 x 2500 W @ 2 ohms)  in only 2U Four-channel fexibility –   •  Four channels in one cabinet increases effciency, fexibility and value  in powering monitor systems,  line arrays, and bi- or tri-amped systems. Adjacent channels bridgeable for 2- or 3-channel operation Lab.gruppen  sound  quality  –   •   FP  10000Q  amplifers maintain the impeccable sonic performance standards set by the original fP Series, with the same durability and even greater effciency NomadLink   • ®  network  ready  – Monitoring  and  control  of  key functions accessible via the  intuitive DeviceControl software and the robust, daisy-chained NomadLink® network Patented  Class  TD  amplifer  topology  –    • Road-proven  output stage delivers Class B audio quality with Class D effciency Regulated  Switch Mode  Power  Supply  (R.SMPS)  –    • Output power remains constant even with signifcant drops in the mains voltage Effcient cooling system –   •  Unique, lightweight Intercooler® cop- per cooling system dissipates more heat to allow extended peak output Adjustable parameters –   •  Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom confgura- tion for any system or application XLR input connectors   • Heavy-duty binding post or Speakon output connectors   • Comprehensive  protection  and warning  –   •   Excessive  output current, DC, high  temperature, very high  frequency  (VHF), short circuit, open load, mains fuse protection, and soft start
Weight6.80 kg19.60 kg10.00 kg8.50 kg17.00 kg14.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.80 kg
Weight 19.60 kg
Weight 10.00 kg
Weight 8.50 kg
Weight 17.00 kg
Weight 14.00 kg
Ohm