CROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack

349.93 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Crown XLI 800 The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the […]

 

Read more

Crown XLI 800

The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 800 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).

Crown XLI 800:

  • Reasonably priced, robust and powerful power amplifier
  • Robust and analogue circuit
  • LED display for each channel for signal, clip and error
  • Stereo, bridge and parallel modes
  • Conventional power supply
  • Performance: 2 x 200 Watts / 8 Ohms, 2 x 300 Watts / 4 Ohms
  • Inputs: Cinch, XLR
  • Outputs: 2 x speakon, spring clip
  • Robust 19 inch housing
  • Height: 2 U

Specifications

XLi800 XLi1500 XLi2500 XLi3500
Channels 2 2 2 2
Sensitivity (full rated power at 8 ohms) 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) > 100 dB > 100 dB > 100 dB > 100 dB
Total Harmonic Distortion (THD) (20Hz – 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) = / = / = / = /
Frequency Response (at 1W, 20Hz – 20kHz) 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB
Crosstalk (below rated power) at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB
at 20kHz: – 59 dB at 20kHz: – 59 dB at 20kHz: – 59 dB at 20kHz: – 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms) > 200 > 200 > 200 > 200
AC Line Voltage and Frequency Configurations (± 10%) 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz
220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz
230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz
Dimensions (H x W x D) 3.5″ x 19″ x 12.4“ 3.5″ x 19″ x 12.4“ 3.5″ x 19″ x 12.4“ 3.5″ x 19″ x 14.4“
 (89 x 482 x 315mm)  (89 x 482 x 315mm)  (89 x 482 x 315mm) (89 x 482 x 366mm)
Net Weight 25.1 lb (11.4 kg) 28.0 lb (12.7 kg) 29.7 lb (13.5 kg) 43.0 lb (19.5 kg)
Net Shipping Weight 29.5 lb (13.4 kg) 32.4 lb (14.7 kg) 34.2 lb (15.5 kg) 47.4 lb (21.5 kg)
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeINTERM L-1400 AMPLIFIER 2X450W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm remove
NameCROWN XLi-800 Power Amplifier 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeINTERM L-1400 AMPLIFIER 2X450W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm remove
Image
SKUXLI-800E009274E003175L-1400E009273LDDP600
Rating
Price 349.93 incl. GR VAT 830.00 incl. GR VAT 592.00 incl. GR VAT 1,075.00 incl. GR VAT 710.00 incl. GR VAT 450.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentCrown XLI 800 The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 800 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel). Crown XLI 800:
  • Reasonably priced, robust and powerful power amplifier
  • Robust and analogue circuit
  • LED display for each channel for signal, clip and error
  • Stereo, bridge and parallel modes
  • Conventional power supply
  • Performance: 2 x 200 Watts / 8 Ohms, 2 x 300 Watts / 4 Ohms
  • Inputs: Cinch, XLR
  • Outputs: 2 x speakon, spring clip
  • Robust 19 inch housing
  • Height: 2 U
Specifications
XLi800 XLi1500 XLi2500 XLi3500
Channels 2 2 2 2
Sensitivity (full rated power at 8 ohms) 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V 0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) > 100 dB > 100 dB > 100 dB > 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) = / = / = / = /
Frequency Response (at 1W, 20Hz - 20kHz) 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB 0 dB, -1 dB
Crosstalk (below rated power) at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB at 1kHz: -75 dB
at 20kHz: - 59 dB at 20kHz: - 59 dB at 20kHz: - 59 dB at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms) > 200 > 200 > 200 > 200
AC Line Voltage and Frequency Configurations (± 10%) 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz 120VAC 60Hz
220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz 220VAC 50/60Hz
230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz 230-240VAC 50/60Hz
Dimensions (H x W x D) 3.5" x 19" x 12.4“ 3.5" x 19" x 12.4“ 3.5" x 19" x 12.4“ 3.5" x 19" x 14.4“
 (89 x 482 x 315mm)  (89 x 482 x 315mm)  (89 x 482 x 315mm) (89 x 482 x 366mm)
Net Weight 25.1 lb (11.4 kg) 28.0 lb (12.7 kg) 29.7 lb (13.5 kg) 43.0 lb (19.5 kg)
Net Shipping Weight 29.5 lb (13.4 kg) 32.4 lb (14.7 kg) 34.2 lb (15.5 kg) 47.4 lb (21.5 kg)

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

- Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per usec
- Damping Factor: @ 8 Ohm: 300
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 individual fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
- build in clip limiter
- Input: XLR 3pin + Jack 6,3mm
- output: Speakon + Binding post
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
- Weight: 15 KG.

L1400 450W-450W 4ohm (280W-280W8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs)

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket
Weight5.00 kg14.80 kg15.00 kg14.40 kg12.60 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 14.80 kg
Weight 15.00 kg
Weight 14.40 kg
Weight 12.60 kg
Weight 13.00 kg