RCF CS3041 COLUMN SPEAKER SLIM LINE 30/15W

145.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
CS 3041 is formed in an ultra slimline design offering minimal visual impact.Easy installation can be achieved with either the supplied ‘L’ shaped wall brackets or the optional MA 7W swivel bracket, which allows the installer to angle the speaker to suit.The new CS Slimline Columns have been optimised for speech reproduction using extended range […]

 

Read more

CS 3041 is formed in an ultra slimline design offering minimal visual impact.
Easy installation can be achieved with either the supplied ‘L’ shaped wall brackets or the optional MA 7W swivel bracket, which allows the installer to angle the speaker to suit.
The new CS Slimline Columns have been optimised for speech reproduction using extended range 2 inch speakers and 1 inch tweeters

APPLICATIONS

  • • Auditorium
  • • Halls
  • • Churchs
  • • Cathedrals
  • • Meeting places
  • Ideal for speech reproduction, shape designed to enable corner installation
  • Music power/RMS: 30/15W
  • Four 50 mm (2“) diameter extended range speakers and one tweeter 25 mm (1“)
  • Body in extruded aluminium bake-painted RAL 9016 White and front metal grille RAL9016 White, includes accessory for wall mounting
  • Built-in multi-tapped transformer (15 – 10 – 5 W) for 100 V constant voltage connection
  • 16-ohm input that can be selected on the terminal block
  • Audio connection on screw terminal block

ACOUSTICAL SPECIFICATIONS

  • Type of speaker:Column
  • Frequency Response:160Hz ÷ 20 kHz
  • Max SPL @ 1m:105dB
  • Horizontal coverage angle:180°
  • Vertical coverage angle:70°
  • Power Handling:15W RMS
  • Peak Power Handling:30W PEAK
  • System Sensitivity:87dB
  • Impedance:16Ω

TRANSDUCERS

  • Speaker:4 x 2“
  • Tweeter:1“

INPUT SECTION

  • Constant voltage:100 V / 70 VV
  • Power Selection:15 – 10 – 5 (100 V)

CABINET

  • Hardware:Body in aluminium
  • Colour:RAL 9016
  • Grille:Metal

PHYSICAL SPECIFICATIONS

  • Height:430 / 16.92mm/inch
  • Width:76 / 2.99mm/inch
  • Depth:65 / 2.55mm/inch
  • Net weight:7 / 3.74kg/lbs
Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF CS3041 COLUMN SPEAKER SLIM LINE 30/15W”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF CS3041 COLUMN SPEAKER SLIM LINE 30/15W removeTOA BS-633AT Wall mount speaker removeJBL CONTROL 28T-60 8 inch, 2-way System with 70V/100V Transformer removeTOA F-1300BT/WT Installation Speaker 50 Watts removeTOA BS-1034 10W Wall-Mount Speaker removeTOA F-2000BT Speaker, 8" 2 Way, 60W/70V, Black remove
NameRCF CS3041 COLUMN SPEAKER SLIM LINE 30/15W removeTOA BS-633AT Wall mount speaker removeJBL CONTROL 28T-60 8 inch, 2-way System with 70V/100V Transformer removeTOA F-1300BT/WT Installation Speaker 50 Watts removeTOA BS-1034 10W Wall-Mount Speaker removeTOA F-2000BT Speaker, 8" 2 Way, 60W/70V, Black remove
Image
SKUCS3041BS-633ATCONTROL 28T-60F-1300BT/WTBS-1034F-2000BT
Rating
Price145.00 incl. GR VAT 29.19 incl. GR VAT 314.00 incl. GR VAT 142.13 incl. GR VAT 68.39 incl. GR VAT 175.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

CS 3041 is formed in an ultra slimline design offering minimal visual impact.
Easy installation can be achieved with either the supplied ‘L’ shaped wall brackets or the optional MA 7W swivel bracket, which allows the installer to angle the speaker to suit.
The new CS Slimline Columns have been optimised for speech reproduction using extended range 2 inch speakers and 1 inch tweeters

APPLICATIONS
  • • Auditorium
  • • Halls
  • • Churchs
  • • Cathedrals
  • • Meeting places
  • Ideal for speech reproduction, shape designed to enable corner installation
  • Music power/RMS: 30/15W
  • Four 50 mm (2“) diameter extended range speakers and one tweeter 25 mm (1“)
  • Body in extruded aluminium bake-painted RAL 9016 White and front metal grille RAL9016 White, includes accessory for wall mounting
  • Built-in multi-tapped transformer (15 - 10 - 5 W) for 100 V constant voltage connection
  • 16-ohm input that can be selected on the terminal block
  • Audio connection on screw terminal block

ACOUSTICAL SPECIFICATIONS

  • Type of speaker:Column
  • Frequency Response:160Hz ÷ 20 kHz
  • Max SPL @ 1m:105dB
  • Horizontal coverage angle:180°
  • Vertical coverage angle:70°
  • Power Handling:15W RMS
  • Peak Power Handling:30W PEAK
  • System Sensitivity:87dB
  • Impedance:16Ω

TRANSDUCERS

  • Speaker:4 x 2“
  • Tweeter:1“

INPUT SECTION

  • Constant voltage:100 V / 70 VV
  • Power Selection:15 - 10 - 5 (100 V)

CABINET

  • Hardware:Body in aluminium
  • Colour:RAL 9016
  • Grille:Metal

PHYSICAL SPECIFICATIONS

  • Height:430 / 16.92mm/inch
  • Width:76 / 2.99mm/inch
  • Depth:65 / 2.55mm/inch
  • Net weight:7 / 3.74kg/lbs

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

BS-33AT  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)
Sensitivity: (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 810g (1.79 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2

 

  • 55 Hz to 15 kHz frequency range (-10 dB)
  • 175 watts continuous program power capacity
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 2.8 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Spring-loaded input terminals
  • Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
  • Net Weight: 6.3 kg (14 lb)

FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty

F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V

F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)

The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.

SPECIFICATION:

Speaker components: 5" (12cm) cone-type + Balanced dome tweeter.
Rated Input: 100V Line 10W
Impedance: 100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W)
Sensitivity: (1W 1m)9odB
Frequency Responce: 120-20,000Hz
Input Terminal: Push-in terminal
Finish: Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint

 

F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. Black, 70V.

Features:

  • Compact box speakers for music and voice paging distribution
  • Excellent sound quality
  • Octagonal horn design for smooth coverage
  • Adjustable high frequency dispersion
  • Extruded cabinet design improves low frequency performance
  • Individual protection circuit on each component
  • Screwdriver-adjustable power taps
  • Paintable grille and enclosure
  • Wall/ceiling-mount bracket included
  • Optional board, cluster and pole-mount brackets
  • OmniMount-compatible (Series 20.5CA/WA)
  • Optional subwoofers, model HB-1, FB-100 or FB-120
  • Five year warranty

Specifications:

  • LF Driver: 8” cone woofer
  • HF Driver: 1” hard-dome tweeter
  • Crossover: 2.5kHz
  • Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
  • Sensitivity (1W, 1m): 93dB SPL
  • Dispersion (adjustable):
    110° H x 100 ° V
    80° H x 80° V
Weight7.00 kg0.81 kg6.30 kg2.00 kg6.00 kg6.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.00 kg
Weight 0.81 kg
Weight 6.30 kg
Weight 2.00 kg
Weight 6.00 kg
Weight 6.50 kg