| Content |
Info
The CS3 DU microphone station is the basic delegate unit for the CS5 conference systems. It provides both an integrated loudspeaker as well as two 3.5 mm stereo headphone outputs and could be used for up to 2 delegates. Depending on the selected operating mode, the PTT key enables the speaker to directly switch on their microphone or to enter the system waiting list.
|
- System Features and Outline
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Audio signal receiving indicators 1-4 CH,Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
AKG Conference System CS 2 is fully modular and therefore highly flexible, allowing users to create a custom system for any conference application. From microphone capsules to power supplies, designers will find exactly the right components for every type of conference system. Analog control is provided by the Base Station. |
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery (option) or AD-0910 AC adapter (option)) | | Current Consumption | MAX. 270 mA | | Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Reception: Base language channel: 1.95 MHz
Translation language channel: 2.25 MHz | | Acceptance Angle | Vertical: 90°, Horizontal: 120° | | Emission Angle | Vertical: 90°, Horizontal: 120° | | Covering Range | 7 m (radius) | | Input | Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904) | | Output | Monitor speaker: 8Ω, 0.2 W
Headphone: Mini jack × 2 | | LED Indicator | Speech indicator (flashes when the unit is out of communications range),Voting status indicators 1 -3 (flashes when the unit is out of communication range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low) | | Battery Life | Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2) | | Operating Temperature | 0º to＋40º | | Finish | Top panel: ABS resin, gray metallic, paint, semi-gloss | | Dimensions | 210（W ）×65.9（H ）×152（D ）mm | | Weight | 640g | | Option | Lithium-ion battery: BP-900 AC adapter: AD-0910 |
|
Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.
The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).
As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.
|
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery (option) or AD-0910 AC adapter (option)) | | Current Consumption | MAX. 270 mA | | Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Reception: Base language channel: 1.95 MHz
Translation language channel: 2.25 MHz | | Acceptance Angle | Vertical: 90°, Horizontal: 120° | | Emission Angle | Vertical: 90°, Horizontal: 120° | | Covering Range | 7 m (radius) | | Input | Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904) | | Output | Monitor speaker: 8Ω, 0.2 W
Headphone: Mini jack × 2 | | LED Indicator | Speech indicator (flashes when the unit is out of communications range),Voting status indicators 1 -3 (flashes when the unit is out of communication range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low) | | Battery Life | Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2) | | Operating Temperature | 0º to＋40º | | Finish | Top panel: ABS resin, gray metallic, paint, semi-gloss | | Dimensions | 210（W ）×65.9（H ）×152（D ）mm | | Weight | 640g | | Option | Lithium-ion battery: BP-900 AC adapter: AD-0910 |
|
Reviews
There are no reviews yet.