| Content |
The HY-CW1WP is designed to be used exclusively to mount the HX-5 series speaker system to a ceiling. The speaker can be rotated 360゜ horizontally. It can also be tilted vertically up to 82.5゜ when suspended horizontally, and depending on the speaker directivity mode, up to 67.5゜ (for 60゜ mode) or 75゜ (for 15゜, 30゜ or 45゜ mode) when suspended vertically. This bracket is designed for outdoor use.
| Finish | Stainless steel (SUS304) | | Dimensions | 120 (W) × 200 (H) × 220 (D) mm | | Weight | 2 kg | | Accessory | Speaker rear bracket mounting bolt (M8) with washer …4 | Note: Every speaker module must be aimed horizontally or down to keep the weather resistant capability.
|
Glass reinforced polycarbonate fitting at the leg juncture uses a Metal clamp over the fitting to
minimize over-tightening and breakage. Unique to the TS-90 tripod is the use a Lock Lever, which
speeds up set-up and gives a visual warning is it is not set up right.
TeleLock the exclusive feature of TS-90 stands allows one person to safely and easily raise and
lower heavy speakers. When the rotating collar is set to the raise position it lock and holds the
speaker in place with each lift. When you have the speaker at the right hieght rotate the collar to
LOCK and your set. To lower rotate the collar to the LOWER position to assist with the safe
lowering of the speaker.
The footcaps are held in place by both internal and external friction so they stay on gig after gig.
TS-90 series stands also feature our new connector tube, which telescopes up to accommodate
1 3/8" speaker sockets and down for 1 ½" sockets. Locks firmly into desired position. Minimizes
the need for adapters. Our telescoping tube lock prevents accidentally pulling out the center tube.
HEIGHT....3?8?-6?7?
WEIGHT....6lbs/ 2.72 kg./ 4oz
BASE DIAMETER....47?
WEIGHT RATING....150
|
Pneumatic aluminium stand for acoustic speakers and lightenings.
Silver anodyne finishings Height Min. 127 - Max. 210 cm.
Available finishings: Silver anodyne and black colour. | The EasyMount+® mounting adapter enables truss mounting of MAILA array configurations in flown applications. The “DGUV regulation 17”-compliant mounting adapter made of steel with a robust powder coating can be attached to the MAILA SPA and COL amplifier module - the basis of every flown MAILA configuration - without the use of tools and suspended from the truss via a "self-lock" tube clamp.
Once mounted, the EasyMount+® bracket enables convenient 360° rotation and alignment of flown MAILA configurations - even under load with several attached MAILA SAT or MAILA COL modules. The truss mount can be equipped with a maximum of 8x SAT + 1x COL. A clever collar secures the vertical alignment of the loudspeaker array and allows it to be adjusted in the blink of an eye.
Product type
MAILA accessories
Max. load capacity
120 kg
|
The HY-C0801W Ceiling Mount Bracket is designed to mount the speaker system to a ceiling in conjunction with the optional speaker mount bracket.
| Finish | Rolled steel plate, white, semi-gloss, paint | | Maximum Speaker Load | 32 kg (70.55 lb) | | Weight | 1.9 kg (4.19 lb) | | Accessory | Speaker mounting bolt (with washer) …… 4 | | Option | Mounting bracket: HY-1200HW, HY-1200VW, HY-1500HW, HY-1500VW | | Applicable Speaker (option) | HS-120W, HS-150W, HS-1200WT, HS-1500WT |
| Vertical-Array Wall Bracket for Three Control 28 Speakers |
Reviews
There are no reviews yet.