Dali Oberon 1 Bookshelf Loudspeakers 2-way (pair) WALNUT

The DALI OBERON 1 is a ultra compact bookshelf speaker. The cabinet size enables an optimal balance between inner volume for bass performance and a compact appearance for easy integration - suited for smaller rooms, discreet audio setups or wall mounting. It features the same oversized 29 mm ultra-lightweight soft dome tweeter as its floor-standing siblings, and a SMC based 5.25" wood fibre woofer to handle lower midrange and bass. The OBERON 1 is based on the most innovative DALI ideas, traditions and inventions - united in a sleek compact design.

The driver materials, crossover design and geometry applied in the OBERON series has been selected to achieve a wide dispersion pattern. This ensures a well-integrated sound, even when listening at a significant off-axis angle. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion. This is why all DALI speakers are not designed to be toed-in.

The rounded edges and rustic fabric of these new DALI front grilles add a lighter and more contemporary visual look to the OBERON series. This look is enhanced by the elegantly shaped aluminium base mounted on the two floor-standing models.

The OBERON woofer features a wood fibre cone with a blend of fine grain paper pulp, reinforced with wood fibres, which creates a stiff, light-weight and well-behaving structure. In combination with a low-loss surround and spider suspension, this cone reproduces the micro details in the signal - unfiltered and with high accuracy.

The iron pole piece of the OBERON woofer magnet is crowned by a patented SMC disk - minimizing the negative effects of the iron. The use of the SMC disk greatly reduces mechanical distortion, which lowers third order distortion. This allows for a longer listening pleasure, a relaxed midrange and a surprising amount of detail for its price class.

• Frequency Range (+/-3 dB) [Hz]: 51 - 26,000
• Sensitivity (2,83 V/1 m) [dB]: 86
• Nominal Impedance [ohms]: 6
• Maximum SPL [dB]: 106
• Recommended Amplifier Power [W]: 25 - 100
• Crossover Frequency [Hz]: 2,800
• Crossover Principle: 2-way
• High frequency driver, Quantity: 1 x 29 mm
• High frequency driver, Diaphragm type: Soft Textile Dome
• Low frequency driver, Quantity: 1 X 5.25“
• Low frequency driver, Diaphragm type: Wood Fibre Cone
• Enclosure type: Bass Reflex
• Bass Reflex Tuning Frequency [Hz]: 50
• Connection Input: Single Wire
• Recommended Placement: Shelf or stand
• Recommended Distance From Wall [cm]: 1 - 50
• Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234
• Weight [kg]: 4.2
• Accessories Included: Manual, Rubber Feet, Front Grille
  

# Perfect for use with 55-inch class and larger ultra-shallow TVs
# Only 1.5 inches (38mm) deep
# Wall mount bracket and table stand included
# Simply the best ultra slim on-wall speaker on the planet
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter

Dimensions (mounted on wall without bracket) :32" H x 6" W x 1-1/2" D (81.5cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :32" H x 6" W x 1-9/16" D (81.5cm x 15.2cm x 40mm)
Dimensions (on table stand) :35" (89.1cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :4 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :70Hz - 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :30 - 200 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years

System Format:    2 Way
Frequency Response:    42 Hz - 60 kHz
Sensitivity (1W@1M):    88 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    112.6 dBA
Power Handling (RMS):    120 W
Recommended Amplifier Requirements (RMS):    60 - 120 W
Bass Alignment:    Bass reflex. HiVe port system
Crossover Frequency:    2.7 kHz
Drive Unit Compliment:    1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands:    9.9 Kg (21.75 lbs)

• Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
• PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
• 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
• 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
• Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
• Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
• PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.

• 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
• 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
• Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.

Driver Complements
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter     1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response     95Hz-24kHz
Lower -3dB Limit     125 Hz dB
Upper -3dB Limit     20kHz dB
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     89 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options     keyhole slot; .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     3.00 lbs. (1.36kgs)
Shipping unit:     each
Total Shipping Weight     3.70 lbs. (1.68kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ

The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity

1 x 6.5” RDT® Bass/mid-range driver
1 x C-CAM® high frequency ribbon transducer
Ported. HiVe® II technology
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available

Frequency Response: 42 Hz - 100 KHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 50 - 120 W
Bass Alignment: Ported
HiVe II Technology
Mid / H.F Crossover Frequency: 2800 Hz
Bass Low Pass Crossover Frequency: N/A
Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 370 x 225 x 285 mm
(14 9/16 x 8 7/8 x 11 1/4 inch)
Stand External Dimensions -
(H x W x D): 615 x 340 x 365 mm
(24 3/16 x 13 3/8 x 14 3/8 inch)
Weight (each) Excluding stands: 13 Kg (28.6lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES