Dali Oberon 7 floorstanding Loudspeakers 2-way (pair) WALNUT

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.

This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.

This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.

With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.

As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.

Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years

If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.

The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.

The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.

All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.

Technical features
    Nautilus™ tube loaded aluminium dome tweeter
    Kevlar® brand fibre cone FST midrange
    Flowport™

Description    3-way vented-box system
Drive units    1x ø25mm (1 in) aluminium dome high-frequency
    1x ø150mm (6 in) woven Kevlar® cone FST midrange
    2x ø165mm (6.5 in) paper/Kevlar® cone bass

Frequency range    -6dB at 30Hz and 50kHz

Frequency response    56Hz - 22kHz ±3dB on reference axis

Dispersion    Within 2dB of reference response
Horizontal:    over 60º arc
Vertical:    over 10º arc
Sensitivity    89dB spl (2.83V, 1m)

Harmonic distortion    2nd and 3rd harmonics (90dB, 1m)
   

Dimensions | Metric :4-1/16" W x 4-1/16" D x 39-1/4" H | 10.3 x 10.3 x 99.7 cm
Height with Base | Metric :40-1/8" | 101.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :40 Hz – 30 kHz
Base Dimensions | Metric :8-3/16” W x 8” D | 20.8 x 30.3 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition midrange drivers; Two 3-1/2" high definition bass drivers; Two 3-1/2" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :120 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs. | 10.4 kg
Warranty :5 Years

Recommended Usage     Front Speakers
Type     3-Way Bass Reflex Design
Woofers     Dual 8" PMD Cone
MidRange Driver     5" Cone With Waveguide Horn
Tweeters     1" Aluminum Dome With Waveguide Horn
Magnetic Shielding     Yes
Twin Bass Reflex Ports     Single Port
Gold-Plated Brass Extruded Terminals     Bi-Wiring Terminals
Frequency Response     30 Hz - 35 kHz
Sensitivity     89 dB/2.83 V/1 m
Input Power (Maximum / Nominal)     250W / 100W
Impedance     6 Ohms
Product Dimensions (W x H x D)     10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each)     53.7