Content | With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.
This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.
This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.
With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.
As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.
DALI OBERON 7 SPECS
Product series | OBERON |
Frequency Range (+/-3 dB) [Hz] |
36 - 26,000 |
Sensitivity (2,83 V/1 m) [dB] |
88.5 |
Nominal Impedance [ohms] |
6 |
Maximum SPL [dB] |
110 |
Recommended Amplifier Power [W] |
30 - 180 |
Crossover Frequency [Hz] |
2,300 |
Crossover Principle |
2-way |
High frequency driver, Quantity |
1 x 29 mm |
High frequency driver, Diaphragm type |
Soft Textile Dome |
Low frequency driver, Quantity |
2 X 7“ |
Low frequency driver, Diaphragm type |
Wood Fibre Cone |
Enclosure type |
Bass Reflex |
Bass Reflex Tuning Frequency [Hz] |
39.5 |
Connection Input |
Single Wire |
Recommended Placement |
Floor |
Recommended Distance From Wall [cm] |
20 - 80 |
Dimensions With Base (HxWxD) [mm] |
1015 x 200 x 340 |
Weight [kg] |
14.8 |
Accessories Included |
Manual Rubber Feet Spikes Front Grille |
|
System Format: 3 Way Frequency Response: 35 Hz - 60 kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 114.5 dBA Power Handling (RMS): 150 W Recommended Amplifier Requirements (RMS): 100 - 150 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 400 Hz M.F - H.F: 2.6 kHz Drive Unit Compliment: 2 x 5.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 951 x 170 x 300 mm (37 7/16 x 6 11/16 x 11 13/16 inch) Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years |
Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
The CM8 is an elegantly proportioned, slimmed down version of the award-winning CM9. A true three-way loudspeaker that will appeal to discerning customers who demand the very best sound quality, but have limited space in which to achieve it.
Like all the models in the CM Series, the CM8 uses crossovers of remarkable simplicity and quality, so what you hear is that much closer to the sound of the original recording. In its functional perfection and understated elegance, itʼs nothing less than a masterpiece. Pure and simple.
All CM Series speakers come with chrome driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, the highly polished gloss black or the new stylish white.
30-200watt 8 Ohm
Dimensions: 990x200x300
ALSO AVAILABLE IN ROSENUT AND WENGE COLOR
|
Reviews
There are no reviews yet.