Content | The DALI SPEKTOR 6 is the power-house of the SPEKTOR family.
Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.
If you are looking for affordable floorstanding speakers, which delivers a punch, the SPEKTOR 6 is the perfect match for you.
They are serving up a detailed, dynamic and powerful audio reproduction and are the perfect choice for any stereo or surround setup in combination with either the SPEKTOR 1 or SPEKTOR 2 compact speakers.
The DALI SPEKTOR 6, like all
WOOD FIBRE CONES
Our low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.
AMPLIFIER FRIENDLY
The amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound.
SOFT DOME TWEETER
The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).
LOW SIGNAL LOSS
By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero.
Frequency Range (+/-3 dB) [Hz]
43 - 26,000 Hz
Sensitivity (2,83 V/1 m) [dB]
88.5 dB
Nominal Impedance [ohms]
6 ohms
Maximum SPL [dB]
109 dB
Recommended Amplifier Power [W]
30 - 150 Watt
Crossover Frequency [Hz]
2,500 Hz
Crossover Principle
2-way
High frequency driver, Quantity
1 x 25 mm
High frequency driver, Diaphragm type
Soft Textile Dome
Low frequency driver, Quantity
2 x 6,5“
Low frequency driver, Diaphragm type
Wood Fibre Cone
Enclosure type
Bass Reflex
Bass Reflex Tuning Frequency [Hz]
41.0 Hz
Connection Input
Single Wire
Recommended Placement
Floor
Recommended Distance From Wall [cm]
20 - 100 cm
Dimensions (HxWxD) [mm]
972 x 195 x 313 mm
Weight [kg]
13.8 kg
Accessories Included
Spikes
Rubber Feet
Manual |
1 x 1¨ pure Aluminium Tweeter
2 x 5 ¼ ¨Midrange drivers
1 6x10 long-throw racetrack sub
2 6x10 long-throw racetrack
radiators
Recom. Ampl. Power 20-350 W
Internal Amplifier power 300 watt
Impedance 8 Ohms
Sensitivity 93dB
Dimensions (cm) 130.8x24.1x17.1
Ultra-performance floor-standing
loudspeaker with built-in powered
subwoofers |
System Format: 3 Way Frequency Response: 30 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 116.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) AVAILABLE IN SIX COLOR FINISHES
| System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 790 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
1060 x 210 x 330 mm
(41 3/4 x 8 1/4 x 13 inch)
Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) |
The CM8 is an elegantly proportioned, slimmed down version of the award-winning CM9. A true three-way loudspeaker that will appeal to discerning customers who demand the very best sound quality, but have limited space in which to achieve it.
Like all the models in the CM Series, the CM8 uses crossovers of remarkable simplicity and quality, so what you hear is that much closer to the sound of the original recording. In its functional perfection and understated elegance, itʼs nothing less than a masterpiece. Pure and simple.
All CM Series speakers come with chrome driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, the highly polished gloss black or the new stylish white.
30-200watt 8 Ohm
Dimensions: 990x200x300
ALSO AVAILABLE IN ROSENUT AND WENGE COLOR
|
System Format: 3 Way Frequency Response: 35 Hz - 60 kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 114.5 dBA Power Handling (RMS): 150 W Recommended Amplifier Requirements (RMS): 100 - 150 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 400 Hz M.F - H.F: 2.6 kHz Drive Unit Compliment: 2 x 5.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 951 x 170 x 300 mm (37 7/16 x 6 11/16 x 11 13/16 inch) Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Reviews
There are no reviews yet.