DALI SPEKTOR 6 FLOOR STANDING SPEAKERS 2 WAY, 30-120W, 6Ω WHITE PAIR

The DALI SPEKTOR 6 is the power-house of the SPEKTOR family. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance. If you are looking for affordable floorstanding speakers, which delivers a punch, the SPEKTOR 6 is the perfect match for you. They are serving up a detailed, dynamic and powerful audio reproduction and are the perfect choice for any stereo or surround setup in combination with either the SPEKTOR 1 or SPEKTOR 2 compact speakers. The DALI SPEKTOR 6, like all WOOD FIBRE CONES Our low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal. AMPLIFIER FRIENDLY The amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound. SOFT DOME TWEETER The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). LOW SIGNAL LOSS By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero. Frequency Range (+/-3 dB) [Hz] 43 - 26,000 Hz Sensitivity (2,83 V/1 m) [dB] 88.5 dB Nominal Impedance [ohms] 6 ohms Maximum SPL [dB] 109 dB Recommended Amplifier Power [W] 30 - 150 Watt Crossover Frequency [Hz] 2,500 Hz Crossover Principle 2-way High frequency driver, Quantity 1 x 25 mm High frequency driver, Diaphragm type Soft Textile Dome Low frequency driver, Quantity 2 x 6,5“ Low frequency driver, Diaphragm type Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz] 41.0 Hz Connection Input Single Wire Recommended Placement Floor Recommended Distance From Wall [cm] 20 - 100 cm Dimensions (HxWxD) [mm] 972 x 195 x 313 mm Weight [kg] 13.8 kg Accessories Included Spikes Rubber Feet Manual

Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years

System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)

System Format:    3 Way
Frequency Response:    32Hz - 35kHz
Sensitivity (1W@1M):    90dB
Nominal Impedance:    4 Ohms
Maximum SPL (dBA):    116.2
Power Handling (RMS):    175W
Recommended Amplifier Requirements (RMS):    50 - 175W
Bass Alignment:    Bass reflex.
Twin HiVe®II port System
Tweeter Crossover Frequency:    LF/MF: 300Hz
MF/HF: 2.2 kHz
Drive Unit Complement:    2 x 6" RST® Bass drivers.
1 x 6" RST® Bass/Mid driver.
1 x 1" (25mm) C-CAM® gold dome tweeter
Product External Dimensions:
(H x W x D)
inc. plinth & feet    960 x 275 x 388 mm
(37 13/16 x 10 13/16 x 15 1/4 inch)
Individual Weight:    21.76 Kg (47.88 lb)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Dimensions | Metric :4-1/16" W x 4-1/16" D x 39-1/4" H | 10.3 x 10.3 x 99.7 cm
Height with Base | Metric :40-1/8" | 101.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :40 Hz – 30 kHz
Base Dimensions | Metric :8-3/16” W x 8” D | 20.8 x 30.3 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition midrange drivers; Two 3-1/2" high definition bass drivers; Two 3-1/2" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :120 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs. | 10.4 kg
Warranty :5 Years

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)