| Content | The DALI SPEKTOR 6 is the power-house of the SPEKTOR family.
Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.
If you are looking for affordable floorstanding speakers, which delivers a punch, the SPEKTOR 6 is the perfect match for you.
They are serving up a detailed, dynamic and powerful audio reproduction and are the perfect choice for any stereo or surround setup in combination with either the SPEKTOR 1 or SPEKTOR 2 compact speakers.
The DALI SPEKTOR 6, like all
WOOD FIBRE CONES
Our low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.
AMPLIFIER FRIENDLY
The amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound.
SOFT DOME TWEETER
The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).
LOW SIGNAL LOSS
By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero.
Frequency Range (+/-3 dB) [Hz]
43 - 26,000 Hz
Sensitivity (2,83 V/1 m) [dB]
88.5 dB
Nominal Impedance [ohms]
6 ohms
Maximum SPL [dB]
109 dB
Recommended Amplifier Power [W]
30 - 150 Watt
Crossover Frequency [Hz]
2,500 Hz
Crossover Principle
2-way
High frequency driver, Quantity
1 x 25 mm
High frequency driver, Diaphragm type
Soft Textile Dome
Low frequency driver, Quantity
2 x 6,5“
Low frequency driver, Diaphragm type
Wood Fibre Cone
Enclosure type
Bass Reflex
Bass Reflex Tuning Frequency [Hz]
41.0 Hz
Connection Input
Single Wire
Recommended Placement
Floor
Recommended Distance From Wall [cm]
20 - 100 cm
Dimensions (HxWxD) [mm]
972 x 195 x 313 mm
Weight [kg]
13.8 kg
Accessories Included
Spikes
Rubber Feet
Manual |
Dimensions | Metric :4-1/16" W x 4-1/16" D x 39-1/4" H | 10.3 x 10.3 x 99.7 cm
Height with Base | Metric :40-1/8" | 101.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :40 Hz – 30 kHz
Base Dimensions | Metric :8-3/16” W x 8” D | 20.8 x 30.3 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition midrange drivers; Two 3-1/2" high definition bass drivers; Two 3-1/2" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :120 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs. | 10.4 kg
Warranty :5 Years
|
Dimensions | Metric : 4" D x 4-1/16" W x 19-9/16" H | 10.1 x 10.3 x 49.7 cm
Base Dimensions | Metric :5-1/2" D x 6-1/2" W | 14 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition bass/midrange drivers; Two 3-1/2" pressure coupled bass radiators
A/V Receiver Crossover Setting :120 Hz
Frequency Response :60 Hz – 30 kHz
Inputs :One pair of 5 way binding posts
Impedance :Compatible with 8 Ohms outputs
Enclosure :Aircraft grade extruded aluminum
Sensitivity :89 dB
Available Finishes :Gloss Black
Recommended Associated Amplifier Power :10 – 175 watts
Accessories :Wall bracket; Glass Base
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Packaging :One to a carton
Weight | Metric :8 lbs | 3.6 kg
Warranty :5 Years |
Dimensions | Metric :6" W x 6" D x 48-1/2" H (with base) | 15.2 x 15.2 x 123.2 cm
Packaging :One to a carton
Height with Base | Metric :48-1/2" | 123.2 cm
Base Dimensions | Metric :10" W x 9-3/4" D | 25.4 x 24.8
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" high definition midrange drivers; Two 5-1/4" high definition bass drivers; Two 5-1/4" pressure coupled bass radiators
Enclosure :Aircraft grade extruded aluminum
Frequency Response :20 Hz – 30 kHz
Recommended Associated Amplifier Power :20 – 250 watts
Available Finishes :Gloss Black
Weight | Metric :37 lbs | 16.8 kg
Impedance :Compatible with 8 Ohms outputs
Inputs :One pair of 5 way binding posts
Warranty :5 Years
A/V Receiver Crossover Setting :60 Hz
Accessories :Plastic Foot Tippers; Isolation Spikes
Sensitivity :92 dB
Base :Tempered Glass
|
If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.
The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.
The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.
All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.
Technical features
Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
Description 3-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FST midrange
2x ø165mm (6.5 in) paper/Kevlar® cone bass
Frequency range -6dB at 30Hz and 50kHz
Frequency response 56Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 89dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Reviews
There are no reviews yet.