DBX ZC-4 Driverack Wall-Mounted Zone Controller

78.12 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances […]

 

Read more

The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push -to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows “home run” or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system.

• Programmable Volume Control

• Program or Scene Selection

• Programmable Contact Closure Interface

• Up to 1000 ft. on CAT 5 Cable

• Programmable Push-To-Talk Paging

• Programmable Source Selection

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “DBX ZC-4 Driverack Wall-Mounted Zone Controller”

Your email address will not be published. Required fields are marked *

Quick Comparison

DBX ZC-4 Driverack Wall-Mounted Zone Controller removeINTER-M ATT-30 ATTENUATOR 330Ω, 7-30W removeINTER-M EP-616 EMERGENCY PANEL removeTOA RM-300MF Fireman's Microphone removeINTER-M PT-9107SD - Rack-Mountable Stereo/Mono AM/FM Tuner removeTOA AT-303P Attenuator 30 watt, 5 step attenuation remove
NameDBX ZC-4 Driverack Wall-Mounted Zone Controller removeINTER-M ATT-30 ATTENUATOR 330Ω, 7-30W removeINTER-M EP-616 EMERGENCY PANEL removeTOA RM-300MF Fireman's Microphone removeINTER-M PT-9107SD - Rack-Mountable Stereo/Mono AM/FM Tuner removeTOA AT-303P Attenuator 30 watt, 5 step attenuation remove
Image
SKUDBX ZC-4ATT-30EP-616RM-300MFPT-9107SDAT-303P
Rating
Price 78.12 incl. GR VAT 16.78 incl. GR VAT 162.03 incl. GR VAT 840.00 incl. GR VAT 231.86 incl. GR VAT 44.71 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

In stock

Available on backorder

AvailabilityIn stockIn stockIn stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push -to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows "home run” or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system.

• Programmable Volume Control

• Program or Scene Selection

• Programmable Contact Closure Interface

• Up to 1000 ft. on CAT 5 Cable

• Programmable Push-To-Talk Paging

• Programmable Source Selection

The ATT-30 from Inter-M Americas is a one-gang wall panel attenuator. The knob has four clearly-labeled steps to make easy adjustments. A screwless terminal block simplifies installation, and the sleek, modern design fits into any environment. The attenuator can handle up to 30W.

Emergency combination system. Ενσωματώνεται σε σύστημα συναγερμού φωτιάς. Ενσωματωμένο πυκνωτικό μικρόφωνο για Επείγουσα Αναγγελία, Εξωτερική αυτόματη αναγγελία με αρχείο φωνής, Επιλογέας δοκιμής. Ρύθμιση έντασης εξόδου, Βάρος 4,6kg. Διαστάσεις (WxHxD): 482X88X380mm

The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.

Specification
Power Source 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system)
Current Consumption 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected)
Frequency Response 200 Hz - 15 kHz
Distortion 1 % or less
S/N Ratio 55 dB or more
Microphone Unidirectional dynamic microphone with talk key, compressor (on/off switchable)
Volume Control Microphone volume control, Buzzer volume control
Connection Cable Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal
Maximum Cable Distance Total 800 m (874.89 yd)
No. of Connectable RM-320F Max. 3 units
Operation Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch
Indicator Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish ABS resin, blueish gray (PANTONE 538 or its equivalent)
Dimensions 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“)
Weight 1.1 kg (2.43 lb) (with wall mounting bracket unit)
Accessory Wall mounting bracket unit …1, Wall mounting screw …2

 

The PT-9107SD from Inter-M Americas is a high-quality, single rack space digital AM/FM tuner ideal for use in restaurants, retail, offices, and more. It offers both mono and stereo outputs for compatibility with a variety of sound systems. A front-panel display shows information for channel, band, memory, and tuning. Up to twenty stations may be pre-set so your favorites are never more than a click away.

The tuner has a Digi-Link function for remote control. AC and DC power inputs are provided so that emergency 24VDC power may be connected if needed. The PT-9107SD is a great choice for applications needing a high-quality, easy-to-use rack-mountable tuner.

• Single rack space AM/FM tuner • Stereo and mono outputs • Fixed and variable outputs • Front-panel display screen • Stores up to 20 presets • Digi-Link function for remote control • Auto scan  SPECIFICATIONS: Tuning RangeFM: 87.5 - 108MHz
AM: 522 - 1611kHz SensibilityFM: Less than 3uV
AM: Less than 100uV Signal to Noise RatioFM: Greater than 65dB
AM: Greater than 40dB Total Harmonic Distortion (THD)FM: 0.3%
AM: 1% Output LevelFM Mono Balanced: 1V
FM Stereo Balanced: 500mV
AM Mono Balanced: 240mV Controls1 x Power Switch
1 x Memory Button
1 x Preset Button
1 x Mode Preset/Tune Button
10 x Preset Recall Buttons
1 x Volume Control Knob
1 x Mono/Stereo Button
1 x AM Selector Button
1 x FM Selector Button
1 x Up Button
1 x Down Button
1 x Reset Button (Rear Panel) Connectors1 x AC Power In
1 x DC Power In
1 x Fixed Output Connector
1 x Mono Variable Output Connector
1 x Stereo Variable Output Connector
1 x AM Antenna Connector
1 x FM Antenna Connector
1 x Digi-Link Connector Power Source100/120/230/240VAC, 50/60HZ
24VDC Power Consumption11W Dimensions (WxHxD)19 x 1.75 x 11" (483 x 44 x 280 mm) Weight7.7 lbs (3.5 kg)  

Five attenuation settings (OFF, 0/-6/-12/ -16dB), over an input range from 0.5W to 30W.

Weight0.10 kg0.50 kg4.60 kg1.10 kg3.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.50 kg
Weight 4.60 kg
Weight 1.10 kg
Weight 3.50 kg
Weight 0.50 kg