Content |
Dimensions | (Metric) :11-3/8" W x 7-3/4" D x 22-1/8" H | 28.9 x 19.7 x 56.2cm
Driver Complement :Four 6-1/2" cast-basket bass/midrange drivers; Two 1" pure aluminum dome tweeters
Frequency Response :31 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :40 Hz
Packaging :One to a carton
Available Finishes :Piano-Gloss Black
Accessories :Keyhole Hanging Bracket
Inputs :One set of five way binding posts
Warranty :5 Years
Weight | (Metric) :27 lbs | 12.2 kg |
imensions | Metric :40" W x 4-1/4" D x 4-1/4" H: speaker only, not including bracket | 101.6 x 10.5 x 10.5 cm
Driver Complement :Three 3-1/4" BDSS drivers with Axially Aligned 3/4" pure aluminum dome tweeters; Two 3-1/4" BDSS High-output full-range drivers; Four 3" full-range high-output surround drivers
Frequency Response :60 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :20 – 175 watts
A/V Receiver Crossover Setting :140 Hz
Inputs :Five pairs of 5 way binding posts
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler foot
Available Finishes :Gloss Black
Warranty :5 Years
Weight | Metric :20 lbs | 9.1 kg
Enclosure :Aircraft grade extruded aluminum |
Driver Complements
Satellites
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response 85HZ - 31kHz
Lower -3dB Limit 110Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size 7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options Included wall mount bracket; 1/4x20 threated insert
Enclosure Type Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight 4.70 lbs. (2.13kgs)
Mounting Options keyhole slots; .25 x 20 threaded inserts
Enclosure Type Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight 20.30 lbs. (9.21kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
Accessories
(comes with) Satellite wall mount bracket
|
T101 / T101c
Design Two-way closed box
Drive units 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response 80Hz - 30kHz
Crossover frequency 1.7kHz
Amplifier requirements 10 - 100 W
Sensitivity (2.83V/1m) 90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL) 107dB
Impedance 8Ω
Internal volume 0.7 Litres
Weight 1kg (2.2lbs)
Dimensions
(H x W x D) 330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode 140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.
T-2
Design Closed box powered subwoofer
Drive units 1 x 250mm (10in.)
Frequency response 30Hz - 250Hz
Amplifier 250 Watts built-in Class-D
Maximum output (SPL) 110dB
Low pass filter variable Fixed 250Hz, 2nd-order
Low level signal inputs RCA phono socket
Internal volume 12.7 Litres
Power requirements 100 - 240 V ac ~ 50/60Hz
Power consumption 250VA
Weight 13kg (28.6lbs)
Dimensions
(H x W x D) 380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.
|
Dimensions | Metric :46-1/4" W x 4-1/8" D x 5-3/8" H: speaker only, not including bracket | 117.5 x 10.5 x 13.7 cm
Driver Complement :Three 4-1/2" BDSS drivers with Axially Aligned 1" pure aluminum dome tweeters; Two 4-1/2" BDSS High-output full-range drivers; Four 3-1/4" full-range high-output surround drivers
Frequency Response :50 Hz – 30 kHz
Accessories :Wall bracket; Leveler Feet
Sensitivity :90dB
Recommended Associated Amplifier Power :20 – 200 watts
Inputs :Five pairs of 5 way binding posts
A/V Receiver Crossover Setting :100 Hz
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Impedance :Compatible with 8 Ohms outputs
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler feet
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years
|
Frequency Response: C: 55 Hz - 35 KHz L/R: 85Hz - 35KHz Sensitivity (1W@1m): C: 90 dB L/R: 87dB Nominal Impedance: C: 8 Ohms L/R: 8 Ohms Power Handling Single (RMS): C: 100 W L/R: 60 W System Power Handling (RMS): C: 150 W L/R: 100 W Recommended Amplifier Requirements: C: 20 - 150 W L/R: 10 - 100 W Maximum SPL (dBA): 108 Bass Alignment: C: Bass reflex - front ported L/R: Bass reflex - ported to the underside Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver. 3 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 125 x 985 x 105 mm (4 15/16 x 38 5/8 x 4 1/8) Weight (each): Kg (lbs) 8 (17 5/8) User's Manual
|
Reviews
There are no reviews yet.