Content |
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years |
- Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
- Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
- Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
- Directivity Factor (Q) : 8.7 (1k - 16kHz)
- Directivity Index (DI) : 9.4 dB (1k - 16kHz)
- Long-Term System : 250 W (1000 W peak), 2 hrs
- Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
- Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
- Maximum SPL6 : 118 dB cont ave (124 dB peak)
- Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
- Nominal Impedance : 8 ohms
- Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
- Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
- Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
- Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
- Net Weight : 16.0 lbs. (7.3 kg)
- Shipping Weight : 19.4 lbs. (8.8 kg)
| * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 9-5/16“(23.65cm)
Cut-out Diameter 8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-3/8" (8.57cm)
Overall Depth 3-7/8" (9.84cm)
Shipping/Other
Shipped As each
Product Weight 3.25 lbs. (1.47kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
Reviews
There are no reviews yet.