Content |
imensions | Metric :40" W x 4-1/4" D x 4-1/4" H: speaker only, not including bracket | 101.6 x 10.5 x 10.5 cm
Driver Complement :Three 3-1/4" BDSS drivers with Axially Aligned 3/4" pure aluminum dome tweeters; Two 3-1/4" BDSS High-output full-range drivers; Four 3" full-range high-output surround drivers
Frequency Response :60 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :20 – 175 watts
A/V Receiver Crossover Setting :140 Hz
Inputs :Five pairs of 5 way binding posts
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler foot
Available Finishes :Gloss Black
Warranty :5 Years
Weight | Metric :20 lbs | 9.1 kg
Enclosure :Aircraft grade extruded aluminum |
Dimensions | (Metric) :25" W x 8-5/16" H x 16" D | 63.5 x 21.1 x 40.6 cm
Driver Complement :One cast basket 10" sub; Two cast basket 6-1/2" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :19 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Fuse :
Available Finishes :Piano-Gloss Black
Accessories :Feet (3)
Packaging :One to a carton
Weight | (Metric) :62 lbs | 28.1 kg
Warranty :5 Years; 3 Years for Amplifiers
|
System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)
310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)
|
- Dimensions: 21-11/16" W x 12" D x 6-3/4" H
- Response: 30 – 30 kHz.
- Nominal Imp.: 4 – 8 ohms.
- Rec. amp: 20 – 250 watts.
- Efficiency: 91 dB
- Drivers:
- – Two cast-basket 5-1/4" bass/midranges
- – One 1" pure aluminum dome tweeter.
- Finish: Piano-Gloss Black
|
Dimensions | Metric :46-1/4" W x 4-1/8" D x 5-3/8" H: speaker only, not including bracket | 117.5 x 10.5 x 13.7 cm
Driver Complement :Three 4-1/2" BDSS drivers with Axially Aligned 1" pure aluminum dome tweeters; Two 4-1/2" BDSS High-output full-range drivers; Four 3-1/4" full-range high-output surround drivers
Frequency Response :50 Hz – 30 kHz
Accessories :Wall bracket; Leveler Feet
Sensitivity :90dB
Recommended Associated Amplifier Power :20 – 200 watts
Inputs :Five pairs of 5 way binding posts
A/V Receiver Crossover Setting :100 Hz
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Impedance :Compatible with 8 Ohms outputs
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler feet
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years
|
Five discrete channels from one superb speaker
The perfect surround audio solution when you are unable or unwilling to
use rear channel speakers
Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs
Wall mount bracket and table stand included
The dynamic punch, wide frequency range and broad dispersion of
full size speakers
Aircraft grade extruded Aluminum enclosure
Ten anodized Aluminum dome XTDD drivers
Three pure Aluminum dome tweeters
Frequency Response: 60Hz - 30kHz
Sensitivity: 90dB
Nominal Impedance: 8 Ohms
Dimensions: speaker only, not including
bracket: 114.3 x 4 x 13.2cm.
|
Reviews
There are no reviews yet.