Content |
Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years
|
Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red |
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
System Format: 2 Way Frequency Response: 55 Hz - 60 kHz Sensitivity (1W@1M): 86 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 109.8 dBA Power Handling (RMS): 100 W Recommended Amplifier Requirements (RMS): 50 - 100 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.3 kHz Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 300 x 170 x 263 mm (11 13/16 x 6 11/16 x 10 3/8 inch) Weight (each) Excluding stands: 7.5 Kg (16.5 lbs) AVAILABLE IN SIX COLOR FINISHES
| Two Way Bass Reflex Bookshelf Speaker System
Yamaha\'s NS-333 speaker system has been designed specifically for home theater applications. The bookshelf speaker is a bass-reflex design that can be used for main or surround channels and incorporates a 5\' Polymer-Injected Mica Diaphragm (PMD) cone woofer and a 1” aluminum dome tweeter. For improved imaging, the tweeter utilizes Yamaha’s exclusive waveguide horn.
Waveguide Horn
Unlike most homes, movie theaters use sound absorbing materials on walls and ceilings. The result is that the sound reaching your ears is the sound wave produced by the speakers rather than reflected off the walls. Yamaha has created wave guides that greatly reduce reflected sound and increase the proportion of directly generated sound waves reaching your ears. The result is a clear and precise sense of sound direction and placement.
Internally Wired with Monster Cable™
Yamaha has chosen to ensure optimum sound quality by internally wiring some of the components with Monster Cable™. This ensures a clean, clear signal from the crossover network to the speaker driver.
Magnetic Shielding
The speaker is magnetically shielded, so it can be placed on a TV or video monitor without degrading the picture via stray magnetic fields.
Performance Enhanced by a Handsome Cabinet
The EF series speakers are enclosed in an Elliptical Form cabinet with a high gloss black piano finish, which provides solid construction with minimal sound diffraction.
New Grill Design
New grill design and grill cloth provide an attractive and acoustically transparent protective cover for the drivers.
ΝΟΤΕ : The price is valid per piece and not per pair.
Selling Unit: |
Piece |
Type: |
2-Way Bass-Reflex Bookshelf Speaker System |
Featured Technologies: |
- |
Tweeter: |
2,5 cm aluminum dome with Waveguide |
Midrange: |
- |
Woofer: |
13 cm (5\') PMD |
Power: |
150 W/60 W |
Resistance: |
6 ohms |
Frequency Response: |
60 Hz-35 kHz |
Sensitivity: |
87 dB/2.83 V/1 m |
Crossover Frequencies: |
3 kHz |
Auto Standby Operation: |
- |
Filters: |
- |
Remote Control : |
- |
Dimensions (W x H x D): |
200 x 320 x 213 mm |
Weight: |
5,5kg/piece |
|
The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity 1 x 6.5” RDT® Bass/mid-range driver 1 x C-CAM® high frequency ribbon transducer Ported. HiVe® II technology All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 42 Hz - 100 KHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 50 - 120 W Bass Alignment: Ported HiVe II Technology Mid / H.F Crossover Frequency: 2800 Hz Bass Low Pass Crossover Frequency: N/A Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 370 x 225 x 285 mm (14 9/16 x 8 7/8 x 11 1/4 inch) Stand External Dimensions - (H x W x D): 615 x 340 x 365 mm (24 3/16 x 13 3/8 x 14 3/8 inch) Weight (each) Excluding stands: 13 Kg (28.6lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Reviews
There are no reviews yet.