Content |
One 1" pure aluminum dome tweeter.
One 6-1/2" BDSS cast basket driver pressure coupled
to one 6“x10" low bass radiator.
Freq. Response: 32 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 90 dB.
Rec. Ampl. Power: 20 - 225 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 32.9 x 20 x 31 cm.
Weight: 7 kg each.
|
One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.
|
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
The Control SB210 provides low frequency reinforcement for a wide variety of applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.
- 2 x 250 mm (10 in.) Aluminum/Ceramic Composite Cone Drivers
- 42 Hz to 200 Hz frequency range (-10 dB)
- 400 watts continuous pink noise power capacity (IEC-shaped pink noise for 100 hours)
- 95 dB sensitivity (1W/1m) in half-space
8 ohms nominal impedance - IEC 529 IP-X5 rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV
- AV Shielded
- SonicGuard™ Overload Protection
- Dimensions (HxWxD): 355 mm x 590 mm x 570 mm (14 in x 23.3 in x 25.5 in)
- Net Weight: 17.1 kg (38 lbs.)
|
ME 120
Enclosure Bass reflex type Power Handling Capacity Continuous pinknoise: 50W Rated Impedance 6 ohms Sensitivity 88dB (1W, 1m) Frequency Response 60 ? 18,000Hz Crossover Frequency ? Speaker Component 16cm cone-type (magnetically shielded) Input Terminals Screw terminals (compatible with a dual-banana plug), gold plated Finish Enclosure: MDF, black, paint Front grill: Cloth, black Dimensions 170 (W) ? 264 (H) ? 194 (D) mm Weight 3.6kg (per unit) Mounting Brackets (option) WCB-12, WCB-31, CMB-31 |
Reviews
There are no reviews yet.