Content |
One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.
|
One 1" pure aluminum dome tweeter.
One 5-1/4" BDSS driver.
Freq. Response: 35 Hz - 30 kHz,
Impedance: 8 Ohms,
Sensitivity: 90 dB,
Rec. Ampl. Power: 20 - 150 watts,
Inputs: One pair of 5 way binding posts.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim
Dimensions: 29.7 x 17.2 x 29.6 cm,
Weight: 5.5 kg each
| 2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Specifications
- No. of channels: 2
- Passive/Actibe: Passive
- Transformer balanced: Yes
- Attenuator: -30 dB
- Input/Output Gain: -20 dB
- Ground lift switch: Yes
- Max Input Level: +54 dBu
- Max Output Level: +4 dBu
- Frequency Range 2K Source Imp. -1dB: 10 Hz - 40 kHz
- Input Impedance 60Hz: 60 kΩ
- Nom. Output Impedance: 600 Ω
- Housing: Steel
- Dimension: 110 x 110 x 45 mm
| JBL VRX 918S 18'' 1600W power rating continuous, High Power Flying passive Subwoofer
Key Features :
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive? woofer for extended low-frequency output
Large port area for reduced distortion
20 mm threaded pole socket for solid, secure satellite speaker mounting
Specifications:
|
|
|
Frequency Range |
: |
31 Hz ? 220 Hz |
Frequency Response |
: |
34 Hz ? 220 Hz |
Recommended Crossover Frequencies |
: |
80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF |
Power Rating (Continuous / Program / Peak) |
: |
800 W / 1600 W / 3200 W |
System Maximum SPL |
: |
130 dB SPL peak |
System Sensitivity |
: |
95 dB SPL |
LF Driver |
: |
1 x JBL 2268H 457 mm (18 in) Differential Drive woofer |
Nominal Impedance |
: |
8 ohms |
Active Tunings |
: |
Tunings available at www.jblpro.com |
Enclosure |
: |
Rectangular, 18 mm, 13-ply birch plywood |
Suspension / Mounting |
: |
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit |
Finish |
: |
Black DuraFlex? finish |
Grille |
: |
Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing. |
Input Connectors |
: |
Neutrik? Speakon? NL-4 (x2) |
Dimensions (H x W x D) |
: |
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) |
Net Weight |
: |
37 kg (81 lb) |
Optional Accessories |
: |
SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit |
| Behringer DI-400P High-Performance Passive Direct Injection Box
Introducing the Ultra-Compact DI-Boxes from BEHRINGER
There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal.
The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.
This is the sort of medicine that?ll cure headaches in your studio or on stage. | Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
|
Reviews
There are no reviews yet.